SEALEY LOGORATCHET TIE DOWNS
MODEL NO: TD Series
Instructions Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Danger icon
Refer to instructions

SAFETY

BOSCH 600861902 Keo Cordless Universal Cutters - icon11 In selecting and using web lashings, consideration shall be given to the required lashing capacity, taking into account the mode of use and the nature of the load to be secured. The size, shape and weight of the load, together with the intended method of use, transport environment and the nature of the load will affect the correct selection.
BOSCH 600861902 Keo Cordless Universal Cutters - icon11 For stability reasons, free-standing units of load have to be secured with a minimum of one pair of web lashings for frictional lashing and two pairs of web lashing for diagonal lashing.
BOSCH 600861902 Keo Cordless Universal Cutters - icon11 The selected web lashings shall both be strong enough and of the correct length for the mode of use. Basic lashing rules:
• Plan the fitting and removal operations of lashing before starting a journey;
• Keep in mind that during journeys parts of the load may have to be unloaded;
• Calculate the number of web lashings according to pr EN 12195-1.
• Only those web lashings designed for frictional lashing with STF on the label are to be used for frictional lashing;
• Check the tension force periodically, especially shortly after starting the journey.
BOSCH 600861902 Keo Cordless Universal Cutters - icon11 Because of different behaviour and elongation under load conditions, different lashing equipment (e.g. lashing chain and web lashings) shall not be used to lash the same load. Consideration shall also be given to ancillary fittings (components) and lashing devices in the load restraint assembly that are compatible with the web lashing.
BOSCH 600861902 Keo Cordless Universal Cutters - icon11 During use flat hooks shall engage over the complete width of the bearing surface of the hook.
BOSCH 600861902 Keo Cordless Universal Cutters - icon11 Release of the web lashing: Care should be taken to ensure that the stability of the load is independent of the lashing equipment and that the release of the web lashing shall not cause the load to fall off the vehicle, thus endangering the personnel. If necessary attach lifting equipment for further transport to the load before releasing the tensioning device in order to prevent accidental falling and/or tilting of the load. This applies as well when using tensioning devices which allow controlled removal.
BOSCH 600861902 Keo Cordless Universal Cutters - icon11 Before attempting to unload a unit of load its web lashings shall be released so that it can be lifted freely from the load platform.
BOSCH 600861902 Keo Cordless Universal Cutters - icon11 During loading and unloading attention has to be paid to the proximity of any low overhead power lines.
BOSCH 600861902 Keo Cordless Universal Cutters - icon11 The materials from which web lashings are manufactured have a selective resistance to chemical attack. Seek the advice of the manufacturer or supplier if exposure to chemicals is anticipated. It should be noted that the effects of chemicals may increase with rising temperature. The resistance of man-made fibres to chemicals is summarized below.
BOSCH 600861902 Keo Cordless Universal Cutters - icon11 Polyamides are virtually immune to the effects of alkalis. However, they are attacked by mineral acids.
BOSCH 600861902 Keo Cordless Universal Cutters - icon11 Polyester is resistant to mineral acids but is attacked by alkalis.
BOSCH 600861902 Keo Cordless Universal Cutters - icon11 Polypropylene is little affected by acids and alkalis and is suitable for applications where high resistance to chemicals (other than certain organic solvents) is required.
BOSCH 600861902 Keo Cordless Universal Cutters - icon11 Solutions of acids or alkalis which are harmless may become sufficiently concentrated by evaporation to cause damage. Take contaminated webbings out of service at once, thoroughly soak them in cold water, and dry naturally.
BOSCH 600861902 Keo Cordless Universal Cutters - icon11 Web lashings complying with this Part of EN 12195 are suitable for use in the following temperature ranges:
-40 °C to +80 °C for polypropylene (PP);
-40 °C to +100 °C for polyamide (PA);
-40 °C to +120 °C for polyester (PES).
BOSCH 600861902 Keo Cordless Universal Cutters - icon11 These ranges may vary in a chemical environment. In that case, the advice of the manufacturer or supplier shall be sought.
BOSCH 600861902 Keo Cordless Universal Cutters - icon11 Changing the environmental temperature during transport may affect the forces in the web lashing. Check the tension force after entering warm areas.
BOSCH 600861902 Keo Cordless Universal Cutters - icon11  Web lashings shall be rejected or returned to the manufacturer for repair if they show any signs of damage.
BOSCH 600861902 Keo Cordless Universal Cutters - icon11  The following criteria are considered to be signs of damage:
• Only web lashings bearing identification labels shall be repaired;
• If there is any accidental contact with chemical products, a web lashing shall be removed from service and the manufacturer or supplier shall be consulted;
• for web lashings (to be rejected): tears, cuts, nicks and breaks in load-bearing fibres and retaining stitches; deformations resulting from exposure to heat;
• for end fittings and tensioning devices: deformations, splits, pronounced signs of wear, signs of corrosion.
BOSCH 600861902 Keo Cordless Universal Cutters - icon11 Care should be taken that the web lashing is not damaged by the sharp edges of the load on which it is used. A visual inspection before and after each use is recommended.
BOSCH 600861902 Keo Cordless Universal Cutters - icon11 Only legibly marked and labelled web lashings shall be used.
BOSCH 600861902 Keo Cordless Universal Cutters - icon11 Web lashings shall not be overloaded: Only the maximum hand force of 500 N (50 daN on the label; 1 daN = 1 kg) shall be applied.
Mechanical aids such as levers, bars etc. as extensions are not to be used unless they are part of the tensioning device.
BOSCH 600861902 Keo Cordless Universal Cutters - icon11 Web lashings shall never be used when knotted.
BOSCH 600861902 Keo Cordless Universal Cutters - icon11 Damage to labels shall be prevented by keeping them away from sharp edges of the load and, if possible, from the load.
BOSCH 600861902 Keo Cordless Universal Cutters - icon11 The webbing shall be protected against friction, abrasion and damage from loads with sharp edges by using protective sleeves and/ or corner protectors.

INTRODUCTION

Manufactured from polyester webbing with stitched reinforcement. Suitable for securing loads and tarpaulins onto flatbeds or trailers and for general load restraint. Simple drum and ratchet mechanism tensions the webbing to provide superior load restraint.

SPECIFICATION

Model No. Breaking Strain Hook  Maximum Tension Webbing Length WebbingWidth Quantity
TD0635S 600 kg S-Type 300 kg 5 m 25 mm 1
TD0540S2 500 kg S-Type 250 kg 4 m 25 mm 2
TD0540S4 500 kg S-Type 250 kg 4 m 25 mm 4
TD284SD 800 kg S-Type 400 kg 4 m 25 mm 2
TD484SD 800 kg S-Type 400 kg 4 m 25 mm 4
TD0845S 800 kg S-Type 400 kg 4.5 m 25 mm 1
TD0845J 800 kg J-Type 400 kg 4.5 m 25 mm 1
TD1506J 1500 kg J-Type 750 kg 6 m 25 mm 1
TD1508J 1500 kg J-Type 750 kg 8 m 25 mm 1
TD1510J 1500 kg J-Type 750 kg 10 m 25 mm 1
TD2006J 2000 kg J-Type 1000 kg 6 m 35 mm 1
TD2008J 2000 kg J-Type 1000 kg 8 m 35 mm 1
TD2010J 2000 kg J-Type 1000 kg 10 m 35 mm 1
TD3006J 3000 kg J-Type 1500 kg 6 m 50 mm 1
TD3008J 3000 kg J-Type 1500 kg 8 m 50 mm 1
TD3010J 3000 kg J-Type 1500 kg 10 m 50 mm 1
TD5006J 5000 kg J-Type 2500 kg 6 m 50 mm 1
TD5008J 5000 kg J-Type 2500 kg 8 m 50 mm 1
TD5010J 5000 kg J-Type 2500 kg 10 m 50 mm 1
TD10008J 10000 kg J-Type 5000 kg 8 m 75 mm 1
TD10010J 10000 kg J-Type 5000 kg 10 m 75 mm 1
TD10012J 10000 kg J-Type 5000 kg 12 m 75 mm 1
TD41248JD 1200 kg J-Type 600 kg 4.9 m 32 mm 2
TD05045E 500 kg Endless 250 kg 4.5 m 25 mm 2
TD08045E 800 kg Endless 400 kg 4.5 m 25 mm 2
TD0635E 600 kg Endless 300 kg 5 m 25 mm 1

OPERATION

NOTE: If unsure of requirements for specific application of Tie Down, seek professional advice.

4.1.INSTALLING STRAP
4.1.1. Feed webbing through the slot in the ratchet spool (fig.1) and back on itself.
4.1.2. Manually pull the webbing through to remove as much slack as possible before ratcheting.
4.1.3. Start ratcheting by raising and lowering the handle.

4.2. RELEASING THE STRAP
4.2.1. Pull the spring-loaded release tab (fig.2) to override the ratchet mechanism.
4.2.2. Open ratchet until it is fully open and flat.
4.2.3. Pull webbing from the non-fixed side to remove it.
4.2.4. Close ratchet handle once webbing removed.
NOTE: For additional information see the Sealey YouTube channel.

SEALEY TD Series Ratchet Tie Downs

MAINTENANCE

5.1. After use, thoroughly wipe down the strap and the ratchet body using a soft, clean and dry cloth.
5.2. Store the unit in a clean and dry environment.

STORAGE

6.1. Always store in a dry place.

SEALEY FJ48.V5 Farm Jacks - ICON 4 ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Sealey Group, Kempson Way,
Suffolk Business Park, Bury St Edmunds,
Suffolk. IP32 7AR
SEALEY FJ48.V5 Farm Jacks - ICON 5 01284 757500
SEALEY FJ48.V5 Farm Jacks - ICON 6 01284 703534
SEALEY FJ48.V5 Farm Jacks - ICON 7[email protected]
SEALEY FJ48.V5 Farm Jacks - ICON 8www.sealey.co.uk
© Jack Sealey Limited
Original Language Version
TD Series/Issue 1
19/11/21

Documents / Resources

SEALEY TD Series Ratchet Tie Downs [pdf] Instructions
TD Series, Ratchet Tie Downs, Tie Downs, TD Series, Downs

References

Leave a comment

Your email address will not be published.