512 Monitoring Switch Kit
Instruction Manual

512 Monitoring Switch Kit

WIRING SPECIFICATION

5AMP MAX RESISTIVE

1. Connect Wires.
2. Remove Bracket (A) to remove spring assembly.
3. Mount switch bracket (B), using screw and nut.
4. Place spring assembly back into housing.
5. Position switch assembly (C) as shown and secure to door.

P:\INST INSTRUCTIONS\EGRESS CONTROLS\INST-512 REV C 07-21
Any suggestions or comments to this instruction orproduct are welcome. Please contact us through our website or email engineer@sdcsecurity.com

SECURITY DOOR CONTROLS 
WWW.SDCSECURITY.COM
[t] 800.413.8783 
805.494.0622 
E-mail: service@sdcsecurity.com
801 Avenida Acaso, Camarillo, CA 93012
PO Box 3670, Camarillo, CA 93011

Documents / Resources

SDC 512 Monitoring Switch Kit [pdf] Instruction Manual 512 Monitoring Switch Kit, 512, Monitoring Switch Kit, Switch Kit, Kit

References

• User Manual