F34 BACnet IP Module
Wireless System
Overview
The BACnet IP output module converts data from up to 28 wireless sensors for integration into a Building Management System (BMS) Ethernet communication network.
As BACnet IP is a standard protocol, this module is ideal for retrofitting older systems or expanding existing ones.
The module receives data and power from a receiver via a four-wire bus. Alternatively, it can be powered separately using a BAPI Pluggable Terminal Block Kit and a VC350A-EZ power supply.
Configuration is streamlined and user-friendly through a web-based interface, enabling setup and adjustments without requiring physical access to the device post-installation.
The receiver and BACnet IP module are mountable on surfaces, 2.75" snaptrack, or 35mm DIN rail.
Image Description: A blue BACnet IP Output Module is depicted, labeled "BLE - BACnet IP Module" with the BAPI logo. It features a small "SERVICE" indicator light, an Ethernet port, and green terminal blocks for connections. A separate receiver unit is also shown, connected to the module.
Diagram Description: A technical drawing illustrates the physical dimensions of the BACnet IP module. The length is 3.87 inches (98.3mm), the height is 2.75 inches (69.9mm), and the width is 1.28 inches (32.5mm).
Diagram Description: A diagram displays DIP switch settings on the module, including "Global Device Settings" for Sample Rate and Transmit Rate, and "SW1/SW2" for Transmit Rate and Delta values.
? Wireless Connectivity
Ordering Information
- Model: BA/BIP-BLE-EZ: BACnet IP Output Module
[Revision Date]: 08/28/25
Specifications
- Supply Power
- 15 to 24 VDC (from half wave rectified supply)
- Power Consumption
- 40 mA max @ 24 VDC
- Lost Comm. Timeout
- 35 minutes
- Bus Cable Distance
- 4,000 feet (1,200 meters)
- Ethernet Cable Standard
- 100BASE-TX
- Environmental Operation Range
- Temp: 32 to 140°F (0 to 60°C)
Humidity: 5 to 95% RH non-condensing - Material & Rating
- ABS Plastic, UL94 V-0
- Agency
- RoHS (CE pending)
Wireless Site Verification App
BAPI recommends that all wireless customers conduct a site verification and submit the information to BAPI prior to system installation to ensure optimal performance. A site verification application is available on the BAPI website.
Website: https://www.bapihvac.com/wireless-site-verification/
