Product Overview
The Lumatek ATS Pro series offers a range of full spectrum LED grow lights designed for optimal plant growth. Featuring high-efficiency top bin White, Red, and Far Red diodes, coupled with dimmable Lumatek drivers, these lightweight fixtures are ideal for sole-source or supplemental lighting across propagation, vegetative, and flowering stages in indoor cultivation.
Key Specifications:
- Efficacy: 2.7 µmol/J
- Total Output: 816 µmol/s
- Spectrum: Full-Spectrum
Technical Specifications
| Product Code | LUMLED300P |
| Efficacy | 2.7 µmol/J |
| PPF | 816 µmol/s |
| Input Voltage | 220-240V, 50-60Hz |
| Input Power | 310W (100% @ 230V) |
| Footprint | Up to 1.0x1.0m |
| Application | Multi-layer, Room, Tent |
| Waterproof & Dustproof | [IP65 rating] |
| Lifetime | +60,000 hrs |
| Light Distribution | 120° |
| Light Source | Higher Spec 4000K White, 660nm Red & 730nm Far Red Diodes |
| CCT | 4000K |
| Quantity of Diodes Total | White 576; Red 24; Far Red 24 |
| Diodes Power Proportion | White 74%; Red 14%; Far Red 12% |
| Diodes Efficiency | White 2.8 µmol/J; Red 3.2 µmol/J; Far Red 2.2 µmol/J |
| Dimmable | OFF-25%-50%-75%-100% with 0-10V Light Dimmer (Included) |
| External Control | With Lumatek Digital Panel Plus 2.0 or Universal Controller 0-10V |
| Weight | 5.2Kg |
| Dimensions | 559.5 x 559.5 x 71.6mm |
| Spectrum | Full Spectrum + |
| Thermal Management | Passive cooling |
| Power Factor | 0.95 |
| Max. Ambient Temperature | 25°C (@200W Power) |
| BTU | 1051 BTUs/h |
| Warranty | [3-year warranty] |
| Certifications | [IP65 rating], [RoHS compliance], [CE certification], [LVD compliance], [EMI/EMC compliance] |
Spectrum and Light Distribution
External Control Capabilities
The ATS Pro fixtures can be externally controlled using a Lumatek digital lighting controller, such as the Digital Panel Plus 2.0. This allows for advanced management features including light timing, automated dimming (in 1% increments), temperature safety control, and Sunrise & Sunset Mode. A single controller can manage up to 100 fixtures.
Items Included
- 1 x ATS300W Pro LED Fixture with Driver
- 1 x Power Cable 230V
- 1 x 0-10V Light Dimmer + Velcro
- 2 x Metal Cable Hangers
- 1 x Manual
Recommended PPFD for Various Plants
Photosynthetic Photon Flux Density (PPFD) recommendations for different growth stages and plant types:
| Plant Type | Seed (µmol/m²/s) | Clones (µmol/m²/s) | Vegetative (µmol/m²/s) | Flowering (µmol/m²/s) |
|---|---|---|---|---|
| Cannabis | 100-300 | 75-150 | 300-550 | 650+ |
| Tomatoes | 150-350 | 75-150 | 350-550 | 650+ |
| Cucumbers | 100-300 | - | 300-550 | 650+ |
| Peppers | 150-350 | - | 300-550 | 650+ |
Note: Factors influencing PPFD tests include lamp beads deviation, ambient temperature deviation, PC cover transmittance deviation, power source efficiency deviation, and whether reflection is considered.
PPFD Maps
The following tables show the measured Photosynthetic Photon Flux Density (PPFD) distribution across a 1.0m x 1.0m test area for the Lumatek ATS300W PRO at various heights from the canopy. The test was conducted with 49 points, using integrating sphere and LI-COR 180 equipment at an ambient temperature of 25°C and 0% reflection.
PPFD Map - Height 30cm
Canopy Average PPFD: 622.46 µmol/s/m²
| 246.9 | 386.9 | 459 | 437.5 | 406.8 | 281.5 | 223.1 |
| 394.3 | 559.9 | 795 | 800.2 | 759.1 | 521.1 | 343.3 |
| 514.5 | 867.2 | 1121 | 1131 | 994.4 | 620.1 | 445.5 |
| 559.3 | 908.9 | 1199 | 1208 | 1113 | 667.7 | 477.5 |
| 513.5 | 851.8 | 1108 | 1156 | 969.2 | 637.2 | 431.8 |
| 428.4 | 477.2 | 779.2 | 813.5 | 644.5 | 451.4 | 349.9 |
| 253.9 | 332.1 | 418.8 | 459.9 | 441.7 | 324.5 | 216.1 |
PPFD Map - Height 40cm
Canopy Average PPFD: 572.45 µmol/s/m²
| 322.8 | 397.9 | 455.8 | 438.5 | 396.5 | 331.3 | 296.1 |
| 385.7 | 544.6 | 659.9 | 664.1 | 581.2 | 443.8 | 382.3 |
| 500.4 | 673.3 | 830.7 | 871.8 | 762.3 | 577.5 | 441.4 |
| 565.5 | 758.9 | 933.5 | 961.7 | 869.9 | 648.4 | 509.3 |
| 525.7 | 728.4 | 874 | 914.1 | 801 | 578.8 | 481.8 |
| 409.3 | 616.9 | 708.2 | 778.6 | 638.5 | 481.1 | 396.9 |
| 321 | 396.5 | 483.1 | 522.9 | 456.6 | 390.7 | 340.7 |
PPFD Map - Height 50cm
Canopy Average PPFD: 524.06 µmol/s/m²
| 348.8 | 412.8 | 457.1 | 455.3 | 422.1 | 373.3 | 340.3 |
| 395.8 | 470.8 | 558.8 | 582.1 | 522.8 | 430.6 | 385.8 |
| 457.7 | 592.3 | 657.1 | 722.9 | 649.9 | 533.2 | 447.2 |
| 508.2 | 632.3 | 737.9 | 767.9 | 692.5 | 556.1 | 499.1 |
| 497.5 | 594.3 | 708.6 | 736.7 | 639.1 | 544.9 | 648.1 |
| 437.5 | 486.4 | 618.4 | 642.4 | 567.5 | 477.9 | 436.8 |
| 357.9 | 431.3 | 528.1 | 468.1 | 447.3 | 390.6 | 381.9 |
PPFD Map - Height 100cm
Canopy Average PPFD: 401.80 µmol/s/m²
| 379.5 | 379.8 | 366.2 | 358.7 | 353.8 | 368.1 | 324.8 |
| 375.3 | 401.4 | 407.9 | 415.4 | 402.9 | 398.2 | 371.2 |
| 378.3 | 424.1 | 446.1 | 441.8 | 426.6 | 398.3 | 379.6 |
| 391.5 | 429.3 | 448.8 | 456.7 | 441.9 | 407.3 | 386.9 |
| 393.6 | 410.9 | 449.7 | 452.7 | 437.7 | 412.2 | 388.8 |
| 379.4 | 427.3 | 441.9 | 449.4 | 426.4 | 386.5 | 367.9 |
| 345.5 | 398.5 | 424 | 425.6 | 396.7 | 370.2 | 343.6 |
Contact & Support
For sales support:
orders@lumatek.co.uk
General contact:
info@lumatek.co.uk
For technical support:
techsupport@lumatek.co.uk
For more information on Lumatek products, visit: www.lumatek-lighting.com
