AXOR Edge 3-Hole Basin Mixer for Wall-Mounted Installation with 190 mm Spout and Push-Open Waste Set - Polished Gold Optic
Article Number: 46061990
Features
- Consists of: 3-hole basin mixer, waste set
- Spout projection: 190 mm
- Handle variant: Lever handle
- Spray pattern: Normal spray
- Maximum flow rate at 3 bar: 5 l/min
- Ceramic valves hot/cold 90°
- Suitable for continuous flow heaters
- Push-Open waste set G 1"
- Waste set material: Metal
- Connection type: Concealed body
- Connection size: DN15
- EU Taxonomy: max. 6 l/min - significant contribution (SC) possible
Technology
AirPower: Mixes air with water for a fuller spray. [air icon]
EcoSmart: Limits water consumption to a maximum of 5 l/min. [water drop icon]
Product Image
A brass basin mixer with two lever handles and a spout, finished in polished gold optic. The mixer is designed for wall-mounted installation.
Dimensional Drawing
A technical drawing showing the dimensions of the basin mixer. Key dimensions include:
- Spout projection: 190 mm
- Height from wall to spout outlet: approximately 110 mm
- Mounting hole spacing: 150 mm
- Handle dimensions: 56 mm height, 12° angle
- Overall width: 210 mm
Diagram shows various measurements for installation and configuration.
Flow Rate Diagram
A graph illustrating the flow rate (Q) in liters per minute and liters per second versus pressure in MPa.
- The graph shows two lines: one with flow limitation and one without.
- With flow limitation, the flow rate is approximately 5 l/min at 0.3 MPa.
- Without flow limitation, the flow rate increases with pressure, reaching over 6 l/min at 0.4 MPa.
This diagram helps in understanding the water consumption at different pressure levels.
