PLT Solutions PLTS-12281 Motion Sensor Remote
Description
Featuring various settings, this remote controls the sensor of round LED high bays.
Features
- Compatible with select round LED high bays; refer to the Compatible Fixtures section for a full list.
- Includes a reset button to return the sensor to default settings.
- The remote automatically turns off after 10 seconds of non-use.
- Controls an unlimited number of fixtures; fixtures are programmed one at a time and must be within 15 meters (or 49.2 feet) of the sensor/fixture being adjusted or controlled.
Remote Overview
The PLTS-12281 is a handheld remote control with a rectangular form factor. It features a display area at the top showing indicator lights for brightness, hold time, standby dim, standby time, and sensitivity. Below the display are several rows of buttons. The top section includes buttons for ON/OFF, Brightness, Send, Hold Time, Standby Dim, Standby Time, Sensitivity, and Daylight. A dedicated Reset button is located below these, followed by '+' and '-' buttons, and a 'Test' button at the bottom. The remote is designed for intuitive operation of compatible LED high bay lighting systems.
Button Functions
| Button | Description |
|---|---|
| Brightness Indicators | Shows the selected brightness setting: 70%, 80%, 90%, or 100%. |
| Hold Time Indicators | Shows the selected hold time: 10 seconds, 1 minute, 10 minutes, or 30 minutes. |
| Standby Dim Indicators | Shows the selected stand-by dimming setting: 10%, 20%, 30%, or 50%. |
| Standby Time Indicators | Shows the selected standby time setting: [unlimited], 1 minute, 30 minutes, or 60 minutes. [+∞ means unlimited stand-by time] |
| Sensitivity Indicators | Shows the selected sensitivity settings: 20%, 50%, 75%, or 100%. |
| Daylight Indicators | These indicators are not functional. |
| ON/OFF Button | Long press until the brightness indicator lights in the first row to activate the remote. Once active, you can press to turn the fixture on or off. |
| Brightness Button | Adjusts the dimming level to 70%, 80%, 90%, or 100%. |
| Send Button | Press to save the settings after each change. The indicator lights confirm the save setting. Must be pressed after every change to be saved. |
| Hold Time Button | Adjusts the hold time to 10 seconds, 1 minute, 10 minutes, or 30 minutes. |
| Standby Dim Button | Adjusts the stand-by dimming level to 10%, 20%, 30%, or 50%. |
| Standby Time Button | Adjusts the stand-by time to [unlimited], 1 minute, 30 minutes, or 60 minutes. [+∞ means unlimited stand-by time] |
| Sensitivity Button | Adjusts the sensitivity to 20%, 50%, 75%, or 100%. |
| Daylight Button | These buttons are not functional. |
| Reset Button | Resets the sensor back to default settings. Default Settings: Brightness: 100%, Hold Time: 1 min, Stand-by Dimming Level: 20%, Stand-by Time: 1min, Sensitivity: 100%, Daylight: Disabled. |
| + Button | These buttons are not functional. |
| - Button | These buttons are not functional. |
| Test Button | Used for testing the sensor. When pressed, the sensor enters test mode where the hold time is only 3 seconds. When in test mode, all buttons will be disabled except for Test, Sensitivity, and Send. |
Additional Notes
Due to power differences between dimming ratios, BRIGHTNESS and STANDBY DIM will adjust based on the amount of power being used at the time.
Compatible Fixtures
| Product # | Description |
|---|---|
| PLTS-12259 | Round LED High Bay with Motion Sensor - 1000W MH Equal, 240W, 34,716 Lumens, 5000K, Black Finish |
| PLTS-12260 | Round LED High Bay with Motion Sensor - 1000W MH Equal, 240W, 34,716 Lumens, 5000K, White Finish |
| PLT-12411 | Selectable Round LED High Bay with Uplighting & Downlighting - 1000W MH Equal - 180 Watt Direct/60 Watt Indirect - 3000K/4000K/5000K - White Finish |
| PLT-12412 | Selectable Round LED High Bay with Uplighting & Downlighting - 1000W MH Equal - 180 Watt Direct/60 Watt Indirect - 3000K/4000K/5000K - Black Finish |
| PLT-12568 | Round LED High Bay with Motion Sensor - 1000W MH Equal, 240W, 32,400 Lumens, 5000K, Black Finish |
| PLT-12571 | Round LED High Bay with Motion Sensor - 1000W MH Equal, 240W, 32,400 Lumens, 5000K, White Finish |
Dimensions
The remote control has the following dimensions:
- Length: 5.1 inches
- Height: 0.71 inches
- Width: 1.97 inches
The diagram shows a side view of the remote, indicating its length of 5.1 inches and width of 1.97 inches. A separate measurement indicates a height of 0.71 inches.
