SLAclite 1x4FT LED Flat Panel Light (Model B0FDF9BFYD, 2-Pack) Instruction Manual

1. پراڊڪٽ ختمview

The SLAclite 1x4FT LED Flat Panel Light is designed for various indoor applications, offering adjustable brightness and color temperature. This fixture provides efficient and uniform illumination, suitable for offices, garages, kitchens, and other commercial or residential spaces. Key features include selectable wattage (24W/30W/40W), 5 CCT options (3000K/3800K/4500K/5200K/6000K), and smooth 10-100% Triac dimming.

This LED panel light is engineered for energy efficiency, providing up to 5200 lumens of brightness while consuming significantly less power than traditional lighting. Its slim profile and flicker-free design contribute to a comfortable and productive environment.

2. اهم حفاظتي ڄاڻ

Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• برقي حفاظت: Always turn off power at the circuit breaker before installing, servicing, or cleaning the fixture. Ensure proper grounding to avoid electrical shock.
• قابل اليڪٽريشن: تنصيب سڀني مقامي ۽ قومي اليڪٽريڪل ڪوڊن جي مطابق هڪ قابل اليڪٽريشن طرفان ڪئي وڃي.
• جلدtage: This fixture is designed for 120V/60Hz electrical systems. Do not connect to any other voltage.
• چڙهڻ: Ensure the mounting surface can support the weight of the fixture. Use appropriate hardware for the ceiling type (cement, wood, drywall).
• صرف اندروني استعمال: This product is rated for indoor use only. Do not expose to moisture or outdoor elements.
• گرمي: Do not cover the fixture with insulating material. Ensure adequate airflow around the fixture.
• نقصان: Do not operate the fixture if it is damaged. Contact customer support for assistance.

3. دٻي ۾ ڇا آهي

انسٽاليشن شروع ڪرڻ کان اڳ پڪ ڪريو ته سڀئي جزا موجود آهن:

• 1x4 LED Flat Panel Lights (2 units)
• چڙهڻ واري پليٽ
• Mounting Screw Kit (includes wire nuts, fastening clips, expansion tubes, M4x25MM screws, M4x30MM screws, M4x60MM screws)

4. وضاحتون

5. سيٽ اپ ۽ تنصيب

Before installation, ensure the power is turned off at the circuit breaker. This fixture supports Surface Mount and Suspended Mount installations. Recessed installation is not supported.

5.1. قبل از انسٽاليشن

1. پاور بند ڪريو: لائيٽ فڪسچر جي پاور سپلائي کي ڪنٽرول ڪندڙ سرڪٽ بريڪر کي ڳوليو ۽ ان کي بند ڪريو. وولٽ استعمال ڪندي پڪ ڪريو ته بجلي بند آهي.tagاي جاچ ڪندڙ.
2. پيڪ ڪريو: Carefully remove the fixture and all components from the packaging. Inspect for any damage.
3. سيٽنگون چونڊيو: Before mounting, adjust the CCT (Color Correlated Temperature) and Wattage dip switches located on the side of the fixture to your desired settings. These are typically small switches that can be toggled with a finger or small tool.

5.2. مٿاڇري جي انسٽاليشن

1. ماؤنٽنگ پليٽ ڳنڍيو: Secure the mounting plate to the ceiling using the appropriate screws and expansion tubes from the kit. Ensure the plate is firmly attached and level.
2. وائرنگ: Connect the fixture's wires to the building's electrical wires (Black to Black, White to White, Ground to Ground) using the provided wire nuts. Ensure all connections are secure.
3. ماؤنٽ فڪسچر: Carefully align the fixture with the mounting plate and secure it in place. Some models may slide into grooves or attach with additional screws.

5.3. معطل ٿيل تنصيب

For suspended installation, additional suspension kits (not included) are typically required. Follow the instructions provided with your suspension kit in conjunction with these steps.

1. Install Suspension Kit: Attach the suspension cables or rods to the ceiling and to the fixture's designated suspension points according to the suspension kit's instructions.
2. اونچائي کي ترتيب ڏيو: Adjust the suspension cables to achieve the desired hanging height and ensure the fixture is level.
3. وائرنگ: Connect the fixture's wires to the building's electrical wires (Black to Black, White to White, Ground to Ground) using the provided wire nuts. Ensure all connections are secure.

6. آپريٽنگ هدايتون

6.1. رنگ جي درجه حرارت (سي سي ٽي) جي چونڊ

The fixture offers 5 selectable color temperatures. Adjust the CCT dip switch on the side of the fixture to choose your preferred light color before final installation or if you need to change it later.

• 3000K: گرم پيلي روشني
• 3800K: Neutral Warm Light
• 4500K: غير جانبدار سفيد روشني
• 5200K: Cool White Light with a Natural Tendency
• 6000K: ٿڌي سفيد روشني

6.2. واٽtagاي چونڊ

The fixture allows you to select between three wattage outputs to control brightness and energy consumption. Adjust the Power Dip Switch on the side of the fixture to your desired wattage.

• 24 ڊبليو Lower brightness, maximum energy saving.
• 30 ڊبليو وچولي روشني.
• 40 ڊبليو Highest brightness, maximum light output.

6.3. ڊمنگ فنڪشن

This fixture supports 10-100% smooth Triac dimming. To utilize this feature, ensure you have a compatible Triac dimmer switch installed in your electrical system.

Adjust the dimmer switch to achieve your desired light intensity. The fixture is designed for flicker-free and noiseless operation across the dimming range.

7. سار سنڀال

The SLAclite LED Flat Panel Light requires minimal maintenance.

1. صفائي: صفائي ڪرڻ کان اڳ پڪ ڪريو ته بجلي بند آهي. نرم، سڪل، يا ٿورو ڊي استعمال ڪريوamp فڪسچر جي مٿاڇري کي صاف ڪرڻ لاءِ ڪپڙو. گھڙڻ وارا صاف ڪندڙ، سالوينٽس، يا سخت ڪيميڪل استعمال نه ڪريو، ڇاڪاڻ ته اهي ختم يا برقي حصن کي نقصان پهچائي سگهن ٿا.
2. چڪاس: Periodically inspect the fixture for any signs of damage, loose connections, or wear. If any issues are found, turn off the power and contact customer support.
3. ڪوبه استعمال ڪندڙ-خدمت وارو حصو: There are no user-serviceable parts inside the fixture. Do not attempt to open or repair the unit yourself.

8. مسئلا حل ڪرڻ

If you encounter issues with your LED Flat Panel Light, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact SLAclite customer support.

9. وارنٽي ۽ سپورٽ

9.1. ٺاهيندڙ جي وارنٽي

This SLAclite LED Flat Panel Light comes with a 3 سالن جي ٺاهيندڙ جي وارنٽي خريداري جي تاريخ کان. هي وارنٽي عام استعمال هيٺ مواد ۽ ڪاريگري ۾ خرابين کي ڍڪيندي آهي. اهو غلط تنصيب، غلط استعمال، حادثن، يا غير مجاز ترميمن جي ڪري ٿيندڙ نقصان کي ڍڪي نه ٿو.

9.2. وڌايل تحفظ جا منصوبا

وڌايل تحفظ جا منصوبا الڳ الڳ خريداري لاءِ موجود آهن:

• 3 سالن جو تحفظ وارو منصوبو: Extends coverage for an additional 36 months.
• 4 سالن جو تحفظ وارو منصوبو: Extends coverage for an additional 48 months.
• مڪمل تحفظ: هڪ ماهوار سبسڪرپشن پلان جيڪو گذريل ۽ مستقبل جي خريدارين کي ڍڪيندو آهي.

For details on these plans, please refer to the retailer's webسائيٽ يا انهن جي ڪسٽمر سروس سان رابطو ڪريو.

9.3. ڪسٽمر سپورٽ

For technical assistance, warranty claims, or any questions regarding your SLAclite LED Flat Panel Light, please contact SLAclite customer support. Have your model number (B0FDF9BFYD) and purchase date ready when contacting support.

رابطي جي ڄاڻ: Please refer to the contact details provided on your purchase receipt or the official SLAclite webسائيٽ.