FAHEFANA 20V برش لیس بي تار ڊرل ھدايت وارو دستور

1. تعارف

Thank you for choosing the FAHEFANA 20V Brushless Cordless Drill. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before first use and keep it for future reference.

Image 1.1: The FAHEFANA 20V Brushless Cordless Drill with included accessories, including two batteries, charger, and various drill bits and screwdriver bits.

2. حفاظتي هدايتون

بجلي جا اوزار استعمال ڪرڻ وقت باهه، بجليءَ جي جھٽڪي، ۽ ذاتي زخمن جي خطري کي گهٽائڻ لاءِ هميشه بنيادي حفاظتي احتياطن تي عمل ڪريو.

جنرل پاور اوزار حفاظتي ڊيڄاريندڙ:

• ڪم واري علائقي جي حفاظت: پنهنجي ڪم واري علائقي کي صاف ۽ روشن رکو. گندو يا اونداهو علائقو حادثن کي دعوت ڏئي ٿو. بجلي جا اوزار ڌماڪيدار ماحول ۾ نه هلايو، جهڙوڪ ٻرندڙ مائع، گئس، يا مٽي جي موجودگي ۾.
• برقي حفاظت: مٽيءَ يا زمين سان جسم جي رابطي کان پاسو ڪريو. بجلي جي اوزارن کي مينهن يا نمي جي حالتن ۾ نه لڳايو.
• ذاتي حفاظت: هميشه اکين جي حفاظتي سامان پائڻ. گهڻي وقت تائين ڪم ڪرڻ وقت ٻڌڻ جي حفاظتي سامان استعمال ڪريو. صحيح لباس پائڻ؛ ڍلا ڪپڙا يا زيور پائڻ کان پاسو ڪريو. ڊگها وار محفوظ رکو.
• اوزار استعمال ۽ سنڀال: پاور ٽول کي زور سان نه لڳايو. پنهنجي ايپليڪيشن لاءِ صحيح پاور ٽول استعمال ڪريو. ڪا به ترتيب ڏيڻ، لوازمات تبديل ڪرڻ، يا پاور ٽولز کي ذخيرو ڪرڻ کان اڳ پاور ٽول کان بيٽري پيڪ کي ڌار ڪريو.
• بيٽري پيڪ جو استعمال ۽ سنڀال: صرف ٺاهيندڙ پاران بيان ڪيل چارجر سان ري چارج ڪريو. ڪنهن به ٻئي پاور ٽولز سان بيٽري پيڪ استعمال نه ڪريو.

3. پيڪيج مواد

پيڪنگ ڪرڻ وقت پڪ ڪريو ته سڀئي شيون موجود آهن:

• FAHEFANA 20V Brushless Cordless Drill
• 2 x 2000mAh Lithium-ion Batteries
• 1 x تڪڙو چارجر
• 4 x اسڪرو ڊرائيور بٽس
• 3 x ٽوئسٽ ڊرل بِٽس
• 3 x Flat Drill Bits
• 9 x Socket Wrenches
• 1 x ساکٽ اڊاپٽر
• 1 x Hex Screwdriver Mandrel
• 1 x Flexible Shaft Screwdriver
• استعمال ڪندڙ دستي

Image 3.1: A visual representation of the drill, two batteries, charger, and all 25 accessories included in the package.

4. پراڊڪٽ ختمview

Familiarize yourself with the components and features of your FAHEFANA 20V Brushless Cordless Drill.

Image 4.1: A detailed diagram highlighting key components of the drill, including the 10mm Keyless Chuck, LED Light, Variable Speed Trigger, Power Indicator, Forward/Reverse Switch, Two Speed Selector, 25+1 Torque Setting, and Belt Clip.

اهم خاصيتون:

• بي برش موٽر: Provides up to 60 Nm of torque, enhancing safety and power output compared to traditional brushed motors.


Image 4.2: An internal cutaway view of the drill illustrating the brushless motor, emphasizing its compact design and efficient power delivery.

• ٻٽي بيٽري سسٽم: Includes two 2000mAh Lithium-ion batteries for extended operation and a quick charger for minimal downtime.
• ٻہ-اسپيڊ گيئر باڪس: Offers low speed (0-500 RPM) for driving and high speed (0-1850 RPM) for drilling.
• 25+1 ٽورڪ سيٽنگون: Allows precise torque adjustment to prevent damage to materials and fasteners.
• LED ڪم لائيٽ: گهٽ روشني واري حالتن ۾ بهتر نمائش لاءِ ڪم واري علائقي کي روشن ڪري ٿو.
• 10 ايم ايم ڪي ليس چڪ: Facilitates quick and easy bit changes.
• ڪمپيڪٽ ڊيزائن: Measures approximately 17.2 cm in length and 22 cm in height, making it suitable for various tasks.


Image 4.3: A visual representation of the drill's compact size, with dimensions of 17.2cm in length and 22cm in height, demonstrating its suitability for various tasks.

5. سيٽ اپ

5.1. بيٽري چارج ڪرڻ

1. پڪ ڪريو ته بيٽري محفوظ طور تي چارجر ۾ داخل ٿيل آهي.
2. چارجر کي معياري پاور آئوٽليٽ ۾ لڳايو.
3. The charging indicator light on the charger will show the charging status. A full charge typically takes approximately one hour.
4. مڪمل طور تي چارج ٿيڻ کان پوء، بيٽري کي چارجر مان هٽايو.

Image 5.1: The FAHEFANA 20V Brushless Cordless Drill in use, with a spare 2000mAh Lithium-ion battery and charger visible in the background, illustrating the dual battery system.

Image 5.2: A visual of two batteries, one actively charging via the quick charger and another ready for immediate use, highlighting the continuous operation capability.

5.2. Attaching and Removing Accessories

1. To attach a drill bit or screwdriver bit, rotate the chuck counter-clockwise to open the jaws.
2. Insert the desired accessory into the chuck.
3. Rotate the chuck clockwise to tighten the jaws securely around the accessory. Ensure the bit is centered and firmly held.
4. To remove, rotate the chuck counter-clockwise until the jaws open sufficiently to release the accessory.

6. آپريٽنگ هدايتون

6.1. رفتار چونڊڻ

The drill features two speed settings, controlled by a switch located on top of the tool:

• Speed 1 (0-500 RPM): Ideal for driving screws and applications requiring higher torque and slower speed.
• Speed 2 (0-1850 RPM): Suitable for drilling and applications requiring higher speed.

Image 6.1: A visual comparison demonstrating the drill operating at low speed (0-500 RPM) for driving screws and high speed (0-1850 RPM) for drilling.

Image 6.2: The drill being used for a screwdriver application, indicating the recommended 0-500 RPM setting for such tasks.

Image 6.3: The drill being used for a drilling application, indicating the recommended 0-1850 RPM setting for such tasks.

6.2. Adjusting Torque (Clutch Settings)

The 25+1 torque ring allows you to adjust the amount of torque applied. This prevents over-tightening screws or stripping screw heads, and helps avoid damage to the workpiece.

• Rotate the torque adjustment ring to select the desired setting. Lower numbers are for smaller screws and softer materials, while higher numbers are for larger screws and harder materials.
• The drill setting (indicated by a drill bit icon) bypasses the clutch for maximum torque, suitable for drilling applications.

Image 6.4: A visual guide to the 25+1 clutch settings, showing recommended settings for different materials like plastic, wood, metal, and for driving screws.

تصوير 6.5: هڪ ويجهو تصوير view of the drill's 25+1 torque adjustment ring, illustrating the infinitely variable speed control and precise torque settings.

6.3. اwardتي/ريورس سوئچ

The forward/reverse switch, located above the trigger, controls the direction of rotation. Push it to the left for forward rotation (driving screws/drilling) and to the right for reverse rotation (removing screws/backing out bits). Center position locks the trigger for safety.

6.4. متغير اسپيڊ ٽرگر

The trigger allows for variable speed control. Pressing the trigger further increases the speed. This provides precise control for starting holes or driving screws.

6.5. LED ڪم جي روشني

The integrated LED light automatically illuminates when the trigger is pressed, providing visibility in dark or confined work areas.

Image 6.6: The drill's LED work light actively illuminating the area where a screw is being driven into wood, enhancing visibility.

Image 6.7: A user operating the drill with the flexible shaft attachment, demonstrating how the LED light aids in working in dark and confined spaces.

7. سار سنڀال

7.1. صفائي

• صفائي ڪرڻ کان اڳ هميشه بيٽري پيڪ کي ڊسڪنيڪٽ ڪريو.
• صاف استعمال ڪريو، ڊيamp اوزار جي ٻاهرين حصي کي صاف ڪرڻ لاءِ ڪپڙو. سخت ڪيميڪل يا رگڙيندڙ صاف ڪندڙ استعمال نه ڪريو.
• وڌيڪ گرم ٿيڻ کان بچڻ لاءِ وينٽيليشن جي سوراخن کي مٽي ۽ ملبي کان صاف رکو.

7.2. بيٽري جي سنڀال

• بيٽرين کي ٿڌي، سڪل جاءِ تي محفوظ ڪريو سڌو سج جي روشني ۽ انتهائي گرمي پد کان پري.
• بيٽرين کي گهڻي وقت تائين خارج ٿيل حالت ۾ نه رکو. جيڪڏهن استعمال ۾ نه هجي ته انهن کي وقت بوقت چارج ڪريو.
• بيٽرين کي ڇڏڻ يا اثر انداز ٿيڻ کان پاسو ڪريو.

8. مسئلا حل ڪرڻ

9. وضاحتون

10. وارنٽي ۽ سپورٽ

For warranty information or technical support, please refer to the documentation included with your purchase or contact FAHEFANA customer service through the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.