Sunity LED Strip Light Controller with APP, Music Sync and IR Remote (2 Ports) User Manual

تعارف

This manual provides comprehensive instructions for the Sunity LED Strip Light Controller. This device is designed to enhance your 4-pin 10mm RGB LED light strips by adding Bluetooth app control, music synchronization, and IR remote functionality. It supports two LED strip rolls simultaneously, offering versatile lighting options for indoor use.

پيڪيج مواد

پيڪيج کولڻ تي، تصديق ڪريو ته ھيٺ ڏنل سڀ شيون شامل آھن:

• 1 x Sunity 2-Port Bluetooth LED Controller
• 1 x IR Remote Control (with pre-installed CR2032 battery)
• 2 x 4-pin connectors (for LED strip connection)
• ھدايت وارو دستور

Image: The Sunity LED Strip Light Controller and its accessories as received in packaging.

پيداوار جون خاصيتون

• بلوٽوٿ ايپ ڪنٽرول: Seamlessly connect to the controller via Bluetooth for comprehensive control using a dedicated mobile application.
• موسيقي جي هم وقت سازي: Lights can dance to the rhythm of music through the built-in sensitive microphone or your phone's microphone.
• IR ريموٽ ڪنٽرول: Provides convenient control over colors, modes, and brightness.
• Integrated Button Control: Three physical buttons on the receiver box for basic control (Mode, Speed/Brightness, Color).
• وسيع مطابقت: Designed for 4-pin 10mm 5050, 3528, 2835 RGB LED strip lights. Supports up to two LED strip rolls.
• Scheduled Timer: Set specific times for lights to turn on or off via the mobile application.

تصوير: تفصيلي view of the controller highlighting its compatibility, 16 available colors, music sync mode, and speed/brightness/on/off controls.

سيٽ اپ ڪريو

1. جسماني ڪنيڪشن

1. Connect LED Strip(s): Ensure your LED strip is a 4-pin 10mm RGB type. Align the 4-pin connector from the controller with the pins on your LED strip. Make sure the arrows or polarity markings (+ to +) match to ensure correct color display. The controller supports up to two LED strips.
2. پاور اڊاپٽر ڳنڍيو: Plug the controller's power input into a compatible 12V or 24V power adapter (not included).
3. Activate IR Remote: Before first use, pull out the plastic insulation tab from the battery compartment of the IR remote control.

Image: Step-by-step guide for connecting the LED strip to the controller, pointing the remote to the IR receiver, connecting to a power adapter, and removing the remote's battery tab.

2. ائپ تنصيب

The Sunity LED Strip Light Controller is compatible with the "Lotus Lantern" mobile application. Follow these steps to install and connect:

1. ايپ ڊائون لوڊ ڪريو: Scan the QR code below or search for "Lotus Lantern" in your device's app store (App Store for iOS, Google Play for Android).
2. انسٽال ڪريو ۽ کوليو: ايپليڪيشن کي انسٽال ڪريو ۽ ان کي کوليو.
3. بلوٽوٽ ڪنيڪشن: Ensure Bluetooth is enabled on your mobile device. The app should automatically detect and connect to the LED controller.
4. اجازت ڏيو: Allow necessary permissions, such as location access, for the app to function correctly.

Image: QR code for downloading the "Lotus Lantern" application.

Image: Logos indicating app availability on both Apple App Store and Google Play Store.

آپريٽنگ هدايتون

1. Using the Mobile Application (Lotus Lantern)

Once connected, the app provides extensive control over your LED strips:

• رنگ جي چونڊ: Use the color wheel or preset color options to choose your desired light color.
• روشني جي ترتيب: Adjust the brightness level to suit your environment.
• متحرڪ موڊس: Select from various dynamic lighting modes (e.g., flashing, fading, jumping).
• موسيقي هم وقت سازي موڊ:
  • بلڊ ۾ مائڪ: The controller's built-in microphone detects ambient sound and music, making the lights react dynamically.
  • فون مائڪ: Use your phone's microphone to sync lights with music playing on your device.
• Scheduled Timer: Set specific times for the LED strips to automatically turn on or off.

Image: Various screenshots of the Lotus Lantern app, demonstrating color adjustment, style modes, music sync, microphone control, and scheduling features.

Image: An illustration of the music sync mode, showing LED lights changing colors in rhythm with music in a party setting.

Image: The LED controller with its built-in high-sensitivity microphone, alongside a phone displaying the app's mic mode interface.

Image: The app's scheduled timer feature, illustrating settings for sleeping time (lights off) and waking time (lights on).

2. Using the IR Remote Control

Point the IR remote directly at the controller's IR receiver for optimal response. The remote allows you to:

• بتيون آن/آف ڪريو.
• Select static colors (Red, Green, Blue, White, and various mixed colors).
• روشني جي سطح کي ترتيب ڏيو.
• Change dynamic modes and adjust their speed.
• Activate music sync modes.

Image: A living room setting demonstrating the "Three Control Ways" - via the phone app, IR remote, and the physical controller buttons, all managing LED strip lighting.

3. Using the Controller Buttons

The receiver box features three buttons for basic control:

• موڊ بٽڻ: مختلف متحرڪ روشني جي طريقن ذريعي چڪر.
• SPEED / BRIGHTNESS button: Short press to adjust speed in dynamic modes; long press to adjust brightness in static color modes.
• رنگ وارو بٽڻ: Cycles through static color options.

سار سنڀال

To ensure the longevity and optimal performance of your Sunity LED Strip Light Controller, follow these maintenance guidelines:

• Keep the controller and remote clean and dry. Avoid exposure to moisture or extreme temperatures.
• Use a soft, dry cloth to wipe down the surfaces. Do not use harsh chemicals or abrasive cleaners.
• ڪنٽرولر جي چوڌاري مناسب وينٽيليشن کي يقيني بڻايو وڃي ته جيئن وڌيڪ گرم ٿيڻ کان بچي سگهجي.
• If the IR remote stops responding, check and replace the CR2032 battery if necessary.

مشڪلاتون

If you encounter issues with your Sunity LED Strip Light Controller, refer to the following common problems and solutions:

1. لائٽون آن نه ٿيون:
   • Check all physical connections, ensuring the LED strip, controller, and power adapter are securely connected.
   • Verify that the power adapter is plugged into a working outlet and providing the correct voltagاي (12V يا 24V).
   • Ensure the plastic insulation tab has been removed from the IR remote battery compartment.
2. Incorrect Colors or Missing Colors:
   • Double-check the 4-pin connection between the LED strip and the controller. Ensure the polarity (e.g., arrow to arrow, + to +) is correctly aligned.
   • If colors are still incorrect, use the "Modify Pin Sequence" feature within the Lotus Lantern app. This allows you to adjust the RGB pin order to match your specific LED strip.
   

   Image: The "Modify Pin Sequence" interface within the Lotus Lantern app, used to correct color output if the LED strip's pin order differs from the controller's default.

3. IR Remote Not Responding:
   • Ensure the remote's plastic insulation tab is removed.
   • ريموٽ ڪنٽرول ۾ CR2032 بيٽري کي تبديل ڪريو.
   • Point the remote directly at the IR receiver on the controller, ensuring no obstructions.
4. App Not Connecting via Bluetooth:
   • Verify Bluetooth is enabled on your mobile device.
   • Restart the Lotus Lantern app.
   • پنھنجي موبائل ڊوائيس کي ٻيهر شروع ڪريو.
   • پڪ ڪريو ته ڪنٽرولر آن آهي.
   • Check if the app has necessary permissions (e.g., location) granted on your phone.

وضاحتون

وارنٽي ۽ سپورٽ

For information regarding product warranty, please refer to the documentation provided with your purchase or visit the official Sunity website. For technical support or further assistance, please contact Sunity customer service through their official channels.