Genesis Nitro 950 Gaming Chair User Manual

تعارف

This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your Genesis Nitro 950 Gaming Chair. Please read these instructions carefully before assembly and use to ensure proper function and safety. Keep this manual for future reference.

حفاظت جي ڄاڻ

• اسيمبليءَ کان اڳ پڪ ڪريو ته سڀئي حصا موجود آهن ۽ انهن کي نقصان نه پهتو آهي. جيڪڏهن ڪو به پرزو غائب يا ٽٽل آهي ته استعمال نه ڪريو.
• Follow assembly instructions precisely. Incorrect assembly can lead to instability and injury.
• ڪرسي تي نه بيهڻ. ان کي صرف ويهڻ لاءِ استعمال ڪريو.
• وڌ ۾ وڌ وزن جي گنجائش 150 ڪلوگرام (330 پائونڊ) کان وڌيڪ نه ڪريو.
• اسيمبلي دوران ٻارن ۽ پالتو جانورن کي پري رکو. ننڍا حصا دم گھڙڻ جو خطرو ٿي سگهن ٿا.
• وقت بوقت سڀني بولٽن ۽ اسڪرو کي چيڪ ڪريو ته جيئن پڪ ٿئي ته اهي تنگ آهن. ضرورت مطابق ٻيهر مضبوط ڪريو.
• مواد جي خراب ٿيڻ کي روڪڻ لاءِ ڪرسي کي سڌي سج جي روشني يا انتهائي گرمي پد جي سامهون رکڻ کان پاسو ڪريو.

پيڪيج مواد

Before beginning assembly, verify that all components are included in your package. While specific part names may vary, a typical gaming chair package includes:

• سيٽ جو بنياد
• پٺاڻ
• هٿيار (2)
• اسٽار جو بنياد
• ڪاسٽر (5)
• گيس لفٽ سلنڈر
• Gas lift cover
• Mechanism plate
• لمبر کشن
• مٿو ڪپڙو
• هارڊويئر ڪٽ (اسڪرو، واشر، ايلن ڪي)

سيٽ اپ ۽ اسيمبلي

Assembly is required for this product. Follow these general steps for proper setup. Refer to the included assembly diagram for detailed visual guidance.

1. ڪاسٽرز کي اسٽار بيس سان ڳنڍيو: Insert each of the five casters into the holes at the end of the star base arms until they click securely into place.
2. گئس لفٽ داخل ڪريو: گيس لفٽ سلنڈر کي اسٽار بيس جي مرڪزي سوراخ ۾ رکو. گيس لفٽ کي ٽيليسڪوپڪ پلاسٽڪ جي ڍڪ سان ڍڪيو.
3. Mount Mechanism Plate: Align the mechanism plate with the screw holes on the underside of the seat base. Ensure the front of the mechanism (usually indicated by a label or the lever side) faces the front of the seat. Secure with screws and washers using the provided Allen key.
4. بازو بند ڪريو: Secure the armrests to the sides of the seat base using the designated screws. Do not overtighten initially to allow for minor adjustments.
5. Connect Seat to Backrest: Attach the backrest to the seat base using the side brackets and screws. Ensure proper alignment before tightening all screws firmly.
6. سيٽ اسيمبلي کي گئس لفٽ تي رکو: گڏ ٿيل سيٽ ۽ پٺيءَ کي احتياط سان گئس لفٽ سلنڈر تي رکو، پڪ ڪريو ته اهو مرڪز ۾ ۽ مستحڪم آهي.
7. کشن لڳايو: Position the lumbar cushion and headrest cushion using their straps as desired for ergonomic support.

آپريٽنگ هدايتون

The Genesis Nitro 950 Gaming Chair offers several adjustment features to customize your seating experience.

1. سيٽ جي اوچائي جي ترتيب

To adjust the seat height, locate the lever on the right side, beneath the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up slightly and pull the lever up. Release the lever at the desired height to lock it in place.

2. Backrest Recline Adjustment

The backrest can be reclined up to 165 degrees. Locate the recline lever on the right side of the chair, near the seat. Pull the lever up to release the backrest lock, then lean back to the desired angle. Release the lever to lock the backrest in position.

3. آرم ريسٽ ايڊجسٽمينٽ

The armrests are four-way adjustable. Depending on the specific model, adjustments may include height, forward/backward, left/right swivel, and inward/outward angle. Locate the buttons or levers on the armrests to unlock and adjust them. Press or lift the control, move the armrest to the desired position, and release to lock.

4. Rocker and Locking Function (Frog Mechanism)

The chair is equipped with an advanced mechanism that allows for a rocking motion and the ability to lock the chair in any position. To enable rocking, pull out the lever located on the left side, beneath the seat. To disable rocking and lock the chair in an upright or reclined position, push the lever back in.

5. Lumbar and Headrest Cushion Positioning

The ergonomic headrest and lumbar cushion are filled with memory foam for comfort. Adjust their position by sliding them along the straps on the backrest to find optimal support for your neck and lower back.

سار سنڀال

Regular maintenance helps prolong the life and appearance of your Genesis Nitro 950 Gaming Chair.

• صفائي: اشتهار سان صاف ڪريوamp cloth. For ecological leather, use a mild soap solution if necessary, then wipe dry immediately. Avoid abrasive cleaners or solvents.
• فاسٽنرز: Periodically check all screws and bolts, especially after initial assembly and every few months, to ensure they remain tight. Retighten as needed to maintain stability.
• ڪاسٽر: Keep casters free of hair, dust, and debris to ensure smooth movement.
• گئس کڻڻ: Do not attempt to disassemble or repair the gas lift cylinder. It contains pressurized gas.

مشڪلاتون

If you encounter issues with your Genesis Nitro 950 Gaming Chair, refer to the following common problems and solutions:

وضاحتون

Detailed specifications for the Genesis Nitro 950 Gaming Chair:

وارنٽي ڄاڻ

For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. Warranty coverage typically includes manufacturing defects for a specified period from the date of purchase.

ڪسٽمر سپورٽ

If you require further assistance, have questions about your product, or need to report a missing or damaged part, please contact the retailer where you purchased the Genesis Nitro 950 Gaming Chair or visit the official Genesis webسپورٽ رابطي جي معلومات لاء سائيٽ.