OSRAM NIGHT BREAKER LASER H11 Halogen Headlamp ھدايت وارو دستور

1. تعارف

The OSRAM NIGHT BREAKER LASER H11 (Next Generation) is a high-performance halogen headlamp designed for passenger cars. This product offers enhanced brightness and an extended light beam compared to standard halogen bulbs, improving visibility and safety during night driving. It is ECE certified, ensuring road legality.

اهم خاصيتون شامل آهن:

• Up to 150% more brightness than standard halogen bulbs.
• Light beam projection up to 150 meters long.
• Manufactured using innovative laser ablation technology for optimized light output.
• Completely road legal and ECE certified.

2. حفاظت جي ڄاڻ

Always observe the following safety precautions when handling and installing automotive bulbs:

• بجلي بند ڪريو: Ensure the vehicle's ignition is off and the headlights are switched off before attempting installation or removal.
• حفاظتي سامان پائڻ: Use gloves and eye protection to prevent injury and to avoid touching the glass part of the bulb.
• شيشي کي ڇهڻ کان پاسو ڪريو: Oils from your skin can create hot spots on the bulb's surface, leading to premature failure. Handle the bulb by its plastic base only.
• ٿڌي جي اجازت ڏيو: هيڊليamps can become very hot during operation. Allow sufficient time for the bulbs to cool down before handling.
• مناسب نيڪال: مقامي ضابطن مطابق پراڻا بلب ضايع ڪريو.
• پيشه ورانه تنصيب: جيڪڏهن توهان کي انسٽاليشن جي عمل بابت پڪ ناهي، ته هڪ قابل آٽوميٽو ٽيڪنيشن سان صلاح ڪريو.

3. پيڪيج مواد

Your OSRAM NIGHT BREAKER LASER H11 package (duo box) contains:

• 2 x OSRAM NIGHT BREAKER LASER H11 Halogen Headlamps (Model: 64211NL-HCB)

تصوير: سامهون view of the OSRAM NIGHT BREAKER LASER H11 duo box packaging, showing two H11 bulbs and key features like +150% brightness and +150m light distance.

تصوير: پوئين پاسي view of the OSRAM NIGHT BREAKER LASER H11 duo box packaging, displaying multilingual product information, brightness, distance, and light color specifications, along with a QR code.

4. سيٽ اپ (انسٽاليشن)

The installation process for H11 halogen headlamps is generally similar across many vehicle models, but specific steps may vary. Always refer to your vehicle's owner's manual for detailed instructions.

1. گاڏي تيار ڪريو: Park your vehicle on a level surface, turn off the engine, engage the parking brake, and ensure the headlights are off. For safety, you may disconnect the negative terminal of the car battery.
2. هيڊ لائيٽ اسيمبلي تائين رسائي حاصل ڪريو: Locate the back of the headlight assembly. Depending on your vehicle, you may need to open the hood and remove a plastic cover, air intake, or other components to gain access.
3. وائرنگ ختم ڪريو: Carefully disconnect the electrical connector from the back of the old bulb. This usually involves pressing a tab and pulling.
4. پراڻو بلب هٽايو: Release the retaining clip or twist the bulb counter-clockwise to remove it from the headlight housing. Pull the old bulb straight out.
5. نئون بلب لڳايو: Holding the new OSRAM NIGHT BREAKER LASER H11 bulb by its plastic base (do not touch the glass), insert it into the headlight housing. Ensure it is seated correctly and securely.
6. محفوظ بلب: Re-engage the retaining clip or twist the bulb clockwise until it locks into place.
7. وائرنگ ٻيهر ڳنڍيو: بجليءَ جي ڪنيڪٽر کي نئين بلب سان ٻيهر ڳنڍيو.
8. ٽيسٽ ڪارڪردگي: Before reassembling any removed components, turn on your vehicle's headlights to ensure the new bulbs are working correctly. Check both low and high beams.
9. ٻيهر گڏ ڪرڻ: Reinstall any components that were removed to access the headlight assembly.

نوٽ: Some vehicles may require headlight aiming adjustments after bulb replacement. Consult your vehicle's service manual or a professional if necessary.

5. آپريٽنگ هدايتون

The OSRAM NIGHT BREAKER LASER H11 headlamps operate as standard halogen bulbs within your vehicle's existing electrical system. Once installed, simply use your vehicle's headlight switch to activate them. These bulbs are designed to provide enhanced illumination for improved visibility during night driving and adverse weather conditions.

• Low Beams: Use for general driving, especially when other vehicles are present, to avoid dazzling oncoming traffic.
• هاءِ بيم: Use only when driving on unlit roads without oncoming traffic or vehicles ahead. Switch back to low beams when approaching other vehicles.

These bulbs are ECE certified, meaning they comply with European regulations for automotive lighting and are road legal for use in vehicles where H11 type bulbs are specified.

6. سار سنڀال

OSRAM NIGHT BREAKER LASER H11 bulbs are designed for reliable performance. Regular maintenance is minimal but can help ensure optimal light output and longevity:

• باقاعده چڪاس: Periodically check your headlights to ensure both bulbs are functioning correctly and providing adequate illumination.
• Clean Headlight Lenses: Keep your vehicle's headlight lenses clean from dirt, grime, and oxidation. A clean lens allows maximum light output.
• آلودگي کان بچو: If you need to handle the bulbs again, always use clean gloves to prevent oil transfer to the glass.
• عمر: High-performance halogen bulbs, like the NIGHT BREAKER LASER series, often have a shorter lifespan compared to standard halogen bulbs due to their increased light output. Be prepared for potential replacement after approximately 1-2 years of typical use, depending on driving habits.

7. مسئلا حل ڪرڻ

If you encounter issues with your OSRAM NIGHT BREAKER LASER H11 headlamps, consider the following troubleshooting steps:

• بلب نه روشن ٿيڻ:
  • Check the electrical connection to ensure it is securely attached to the bulb.
  • Inspect the vehicle's fuse box for a blown headlight fuse. Replace if necessary.
  • Verify that the bulb is correctly seated in the headlight housing.
  • If only one bulb is out, the bulb itself may have failed and requires replacement.
• مدھم يا چمڪندڙ روشني:
  • Ensure the vehicle's battery and charging system are functioning correctly.
  • Check for loose or corroded electrical connections at the bulb or within the headlight wiring.
  • Clean the headlight lens if it is dirty or hazy.
• Uneven Light Pattern:
  • Confirm the bulb is properly seated and oriented in the headlight housing.
  • Check if the headlight assembly itself is damaged or misaligned.
  • Headlight aiming may be required. Consult a professional.

جيڪڏهن اهي قدم مسئلو حل نه ڪن، ته پوءِ ڪنهن قابل آٽوميٽو ٽيڪنيشن سان صلاح ڪرڻ جي صلاح ڏني ويندي آهي.

8. وضاحتون

9. وارنٽي ڄاڻ

OSRAM products are manufactured to high-quality standards. For specific warranty terms and conditions applicable to your OSRAM NIGHT BREAKER LASER H11 headlamps, please refer to the official OSRAM website or contact OSRAM customer support. Warranty coverage typically addresses manufacturing defects.

10. سپورٽ

For further assistance, product information, or technical support, please use the following resources:

• او ايس آر اي ايم سرڪاري Webسائيٽ: Visit the official OSRAM automotive lighting website for comprehensive product details, FAQs, and support contacts.
• OSRAM Store on Amazon: OSRAM اسٽور جو دورو ڪريو
• Product Information QR Code: Scan the QR code found on the product packaging for direct access to additional product information: http://qr.osram.info/amviehoff1