HyperX Savage DDR4 Memory Module User Manual

تعارف

This manual provides essential information for the installation, operation, and maintenance of your HyperX Savage DDR4 memory modules. The HyperX Savage DDR4 memory is designed to complement Intel's 2, 4, 6, or 8 core processors, offering enhanced performance for tasks such as video editing, 3D rendering, gaming, and AI processing. These modules feature speeds up to 3000MHz and latencies of CL15, optimized for Intel's 100 series chipset and X99 chipset motherboards, supporting easy overclocking via XMP profiles.

تصوير: سامهون view of the HyperX Savage DDR4 memory module, showcasing its black heat spreader with the HyperX logo and Savage DDR4 branding.

پيڪيج مواد

تصديق ڪريو ته توھان جي پيڪيج ۾ ھيٺيون شيون شامل آھن:

• 2 x HyperX Savage DDR4 Memory Modules (8GB each, 16GB Kit)

سيٽ اپ ۽ تنصيب

Before installing the memory modules, ensure your system is powered off and unplugged from the wall outlet. It is recommended to wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.

1. تياري

1. مطابقت جي چڪاس: Confirm that your motherboard supports DDR4 DIMM memory modules and the specified speed (3000MHz). Refer to your motherboard's manual for details.
2. بجلي بند: پنهنجو ڪمپيوٽر مڪمل طور تي بند ڪريو ۽ پاور ڪيبل ڊسڪنيڪٽ ڪريو.
3. کليل ڪيس: Open your computer's side panel to access the motherboard.

2. ماڊل تنصيب

1. Locate DIMM Slots: Identify the DDR4 DIMM slots on your motherboard. Consult your motherboard manual for the correct slot configuration for dual-channel memory.
2. Open Clips: Gently push down the retention clips at both ends of the DIMM slot.
3. Align Module: Hold the memory module by its edges, avoiding contact with the gold pins. Align the notch on the module with the key in the DIMM slot.
4. ماڊيول داخل ڪريو: Apply even pressure to both ends of the module until it seats firmly into the slot and the retention clips snap into place. Do not force the module.
5. ورجائي: Install the second memory module into the corresponding slot as indicated by your motherboard manual.

تصوير: زاويه view of the HyperX Savage DDR4 memory module, showing the heat spreader design and the gold contact pins.

3. پوسٽ لڳائڻ

1. ڪيس بند ڪريو: Reattach the side panel of your computer case.
2. بجلي ٻيهر ڳنڍيو: Plug the power cable back into your computer and power it on.

آپريٽنگ هدايتون

After physical installation, it is important to configure your system's BIOS/UEFI to utilize the full potential of your HyperX Savage DDR4 memory modules.

Enabling XMP Profile

HyperX Savage DDR4 memory modules come with built-in Intel XMP (Extreme Memory Profile) پروfileايس. هنن پروfiles are optimized for Intel 100 series chipsets and X99 motherboards, allowing for easy overclocking without manual timing adjustments.

1. BIOS/UEFI تائين رسائي: During system startup, repeatedly press the designated key (commonly ڊي ايل, F2, F10، يا F12) to enter your motherboard's BIOS or UEFI settings. The specific key varies by motherboard manufacturer.
2. Locate XMP Setting: Navigate to the memory or overclocking section within the BIOS/UEFI. Look for an option related to 'XMP', 'DOCP', 'A-XMP', or 'Memory Profile'.
3. Enable Profile: Select the XMP profile (usually 'Profile 1' or 'Enabled') to automatically configure the memory to its rated speed (3000MHz) and timings (CL15) at 1.35V.
4. محفوظ ڪريو ۽ نڪرڻ: Save the changes and exit the BIOS/UEFI. Your system will restart with the new memory settings applied.

If your system does not support XMP, the memory will operate at a default JEDEC speed, typically 2133MHz or 2400MHz, depending on your motherboard and CPU.

سار سنڀال

HyperX Savage DDR4 memory modules are designed for durability and reliability. Minimal maintenance is required to ensure optimal performance and longevity.

• صاف رکو: Periodically clean the interior of your computer case to prevent dust buildup on the memory modules and other components. Use compressed air to gently remove dust.
• مناسب سنڀال: When handling memory modules, always hold them by the edges to avoid touching the gold contacts or the integrated circuits.
• گرمي پد ڪنٽرول: Ensure adequate airflow within your computer case to maintain optimal operating temperatures for all components, including memory.

مشڪلاتون

If you encounter issues after installing your HyperX Savage DDR4 memory, consider the following troubleshooting steps:

• سسٽم بوٽ نه ٿي رهيو آهي:
  • Ensure the memory modules are fully seated in their slots and the retention clips are locked.
  • Verify that your motherboard supports the installed memory type and speed.
  • Try booting with only one module installed to identify a potentially faulty module.
• Incorrect Speed Detected:
  • Access your BIOS/UEFI settings and ensure the XMP profile چالو آهي.
  • Update your motherboard's BIOS/UEFI to the latest version, as this can improve memory compatibility and stability.
• سسٽم جي عدم استحڪام يا ڪريشز:
  • Run a memory diagnostic tool (e.g., Windows Memory Diagnostic or MemTest86) to check for errors.
  • Ensure your power supply unit (PSU) provides sufficient and stable power to all components.
  • Check for proper cooling within your system to prevent overheating.

وضاحتون

وارنٽي ۽ سپورٽ

HyperX Savage DDR4 memory modules are backed by a lifetime warranty, ensuring long-term reliability and peace of mind. Free technical support is also available to assist with any questions or issues you may encounter.

For warranty claims or technical assistance, please visit the official HyperX support webسائيٽ تي وڃو يا انهن جي ڪسٽمر سروس سان رابطو ڪريو. وارنٽي جي تصديق لاءِ خريداري جو ثبوت رکو.

HyperX Support: www.hyperx.com/support