JBL JRX218S

JBL Professional JRX218S 18-Inch Passive Subwoofer Instruction Manual

Model: JRX218S

1. تعارف

This manual provides essential information for the proper setup, operation, and maintenance of your JBL Professional JRX218S 18-Inch Passive Subwoofer. Please read this manual thoroughly before using the product to ensure optimal performance and safety. The JRX218S is designed to deliver powerful low-frequency sound for various professional audio applications.

JBL Professional JRX218S 18-Inch Passive Subwoofer front view

شڪل 1: سامهون view of the JBL Professional JRX218S 18-Inch Passive Subwoofer.

2. اهم حفاظتي ڄاڻ

  • پڙهو هدايتون: مستقبل جي حوالي لاء اهي هدايتون برقرار رکون.
  • خبرداريون: پروڊڪٽ تي سڀني ڊيڄاريندڙن تي عمل ڪريو ۽ آپريٽنگ هدايتن ۾.
  • پاڻي ۽ نمي: پاڻي جي ويجهو هي اوزار استعمال نه ڪريو.
  • صفائي: صرف سڪل ڪپڙي سان صاف ڪريو.
  • وينٽيليشن: ڪنهن به وينٽيليشن جي سوراخن کي بند نه ڪريو. ٺاهيندڙ جي هدايتن جي مطابق انسٽال ڪريو.
  • گرمي: ڪنهن به گرمي جي ذريعن جي ويجهو نصب نه ڪريو جهڙوڪ ريڊيٽرز، گرمي رجسٽر، اسٽو، يا ٻيو سامان (بشمول ampلائفائرز) جيڪي گرمي پيدا ڪن ٿا.
  • پاور ڪورڊ تحفظ بجليءَ جي تار کي هلڻ يا پنچ ٿيڻ کان بچايو، خاص طور تي پلگ، سهولتن جي رسيپٽيڪل ۽ ان نقطي تي جتي اهي سامان مان نڪرندا آهن.
  • لوازمات: ٺاهيندڙ طرفان بيان ڪيل صرف منسلڪ / لوازمات استعمال ڪريو.
  • چڙهڻ: صرف ڪارٽ، اسٽينڊ، ٽرپڊ، بریکٹ، يا ٽيبل سان استعمال ڪريو جيڪو ٺاهيندڙ طرفان بيان ڪيو ويو آهي، يا سامان سان وڪرو ڪيو ويو آهي. جڏهن هڪ ڪارٽ استعمال ڪيو وڃي، احتياط استعمال ڪريو جڏهن ڪارٽ / سامان جي ميلاپ کي منتقل ڪيو وڃي ته ٽپ مٿان زخم کان بچڻ لاء.
  • خدمت ڪرڻ: سڀني خدمتن جو حوالو ڏيو قابل خدمت اهلڪارن ڏانهن. خدمت ڪرڻ جي ضرورت پوندي آهي جڏهن سامان ڪنهن به طريقي سان خراب ٿي ويو آهي، جهڙوڪ پاور سپلائي ڪنڊ يا پلگ خراب ٿي ويو آهي، مائع ڦوڪيو ويو آهي يا شيون اپريٽس ۾ گر ٿي ويا آهن، سامان مينهن يا نمي جي سامهون آيو آهي، عام طور تي ڪم نٿو ڪري. ، يا ڇڏيو ويو آهي.

3. دٻي ۾ ڇا آهي

Upon opening the packaging, verify that all components are present and in good condition:

  • JBL Professional JRX218S 18-Inch Passive Subwoofer
  • استعمال ڪندڙ جو دستياب (ھي دستاويز)

جيڪڏهن ڪا به شيون غائب يا خراب آهن، مهرباني ڪري فوري طور تي پنهنجي ڊيلر سان رابطو ڪريو.

4. سيٽ اپ گائيڊ

4.1 لڳائڻ

For optimal bass response, place the JRX218S subwoofer on a stable, flat surface. Corner placement can often enhance bass output, but experiment with different positions to find the best sound for your environment. Ensure adequate space around the unit for proper ventilation.

4.2 ڪنيڪشن

The JRX218S is a passive subwoofer and requires an external amplifier. Connect your amplifier's output to one of the SpeakON inputs on the rear panel of the subwoofer. The two SpeakON inputs are wired in parallel, allowing for easy daisy-chaining to another passive speaker or subwoofer. Ensure your amplifier can safely drive a 4-ohm load.

JBL Professional JRX218S 18-Inch Passive Subwoofer rear panel with SpeakON inputs

Figure 2: Rear panel showing SpeakON input connectors.

4.3 قطب تي چڙهڻ

The subwoofer features a top-mounted, cast aluminum 35 mm pole mount receptacle. This allows you to mount a mid/high speaker cabinet directly above the subwoofer using an optional SS3BK pole (sold separately), creating a compact and integrated full-range sound system. Ensure the pole and mounted speaker are stable and secure.

JBL Professional JRX218S 18-Inch Passive Subwoofer with a pole-mounted speaker

Figure 3: JRX218S with an optional pole-mounted speaker (speaker and pole not included).

5. آپريٽنگ هدايتون

5.1 پاور هينڊلنگ

The JRX218S has a continuous power handling capacity of 350 Watts and a peak power handling of 1400 Watts. It is crucial to match your amplifier's output to these specifications to prevent damage to the subwoofer. Overpowering or underpowering can lead to poor performance or component failure.

5.2 Impedance and Frequency Response

The subwoofer operates at an impedance of 4 ohms. Its frequency range is 34Hz-250Hz (-10dB), with a frequency response of 53Hz-250Hz (±3dB). This range is optimized for deep bass reproduction.

5.3 سسٽم انٽيگريشن

When integrating the JRX218S into a larger PA system, use an external crossover to send only low-frequency signals to the subwoofer. This ensures efficient operation and prevents the subwoofer from attempting to reproduce frequencies outside its optimal range, which can lead to distortion and reduced performance.

6. سار سنڀال

6.1 صفائي

To maintain the appearance and performance of your subwoofer, regularly wipe the exterior with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the carpet covering and internal components.

6.2 Enclosure and Grille

The rugged enclosure is constructed from 19 mm (.75 in) Medium Density Fiberboard (MDF) and covered in black carpet. The 18-gauge perforated steel grille protects the speaker components. Inspect these periodically for any signs of damage. Minor scuffs on the carpet can often be brushed out. Do not attempt to remove the grille unless you are qualified service personnel.

7. مسئلا حل ڪرڻ

مسئلوممڪن سببحل
ڪوبه آواز آئوٽ
  • غلط وائرنگ يا ڍلو ڪنيڪشن.
  • Ampلائفائر آن نه آهي يا خراب آهي.
  • Crossover settings incorrect (no low frequencies sent).
  • Check all SpeakON connections between ampلائفائر ۽ ذيلي ووفر.
  • تصديق ڪريو ampلائفائر جي طاقت ۽ ڪارڪردگي.
  • Ensure your audio processor or mixer is sending low-frequency signals to the subwoofer output.
بگڙيل آواز
  • Overdriving the subwoofer (too much power).
  • Ampلفيئر ڪلپنگ.
  • غلط ڪراس اوور فريڪوئنسي.
  • Reduce input level to the ampلائفائر يا ذيلي ووفر.
  • چيڪ ڪريو amplifier gain settings; ensure it's not clipping.
  • Adjust crossover to send only appropriate low frequencies to the subwoofer.
Weak or Insufficient Bass
  • Subwoofer phase issue.
  • Improper placement.
  • Amplifier not powerful enough.
  • جيڪڏهن توهان جي amplifier or processor has a phase switch, try inverting the phase.
  • Experiment with different subwoofer placements (e.g., closer to a wall or corner).
  • پڪ ڪريو ته توهان جي amplifier provides sufficient power for the subwoofer's continuous rating.

8. ٽيڪنيڪل وضاحتون

خاصيتتفصيل
ماڊلJRX218S
اسپيڪر جو قسمغير فعال Subwoofer
ووفر قطر18 انچ
Power Handling (Continuous/Peak)350W / 1400W
رڪاوٽ4 اومس
فريڪوئنسي رينج (-10dB)34Hz - 250Hz
فريڪئنسي جواب (± 3dB)53Hz - 250Hz
وڌ ۾ وڌ چوٽي SPL133dB SPL
رابطي2 x SpeakON NL-4 (parallel)
بند ٿيل مواد19 mm (.75 in) MDF with black carpet covering
گريل18-gauge perforated steel
قطب جي چوٽيTop-mounted, cast aluminum 35 mm receptacle
طول و عرض (H x W x D)23.5" x 20.3" x 22" (597 ملي ميٽر x 516 ملي ميٽر x 559 ملي ميٽر)
وزن71 پائونڊ (32.5 ڪلوگرام)
JBL Professional JRX218S 18-Inch Passive Subwoofer dimensions diagram

Figure 4: Dimensions of the JRX218S subwoofer.

9. وارنٽي ۽ سپورٽ

9.1 وارنٽي ڄاڻ

The JBL Professional JRX218S 18-Inch Passive Subwoofer comes with a manufacturer's limited warranty. Please refer to the warranty card included with your product or visit the official JBL Professional webتفصيلي شرطن ۽ ضابطن لاءِ سائيٽ. وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.

9.2 ڪسٽمر سپورٽ

For technical assistance, service, or further inquiries, please contact JBL Professional customer support. Contact details can typically be found on the official JBL webسائيٽ يا پيداوار جي پيڪنگنگ ۾.

© 2024 جي بي ايل پروفيشنل. سڀ حق محفوظ آهن.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.