SCS sentinel CAC0003 PushBell 230V Wired Push Button 

Wired push button

WIRING



1/ Let’s be sure it is disconnected from the mains. 2/ Connect the two wires for mains 230V on a surge protector plug with fuse or circuit breaker (installation compliant with standards in force: NFC 15 100 in France). 3/ The section of wires connected to 230 V must not be lower than 1,5 mm•.Compatible with all the wired chimes. Recommended with SCS Sentinel CFIOOO5 MecaBell 3238 23OV chime.
Don’t throw order products with the household waste (garbage). The dangerous substances that they are likely to include may harm health or the environment. Make your retailer take back these products or use the selective collect of garbage proposed by your city.


011-2339876
asistencia.tecnica@scs-sentinel.com



Documents / Resources

SCS sentinel CAC0003 PushBell 230V Wired Push Button [pdf] Instructions
CAC0003 PushBell 230V Wired Push Button, CAC0003, PushBell 230V Wired Push Button, Wired Push Button, Push Button, Button
SCS sentinel CAC0003 PushBell 230V Wired Push Button [pdf] Instruction Manual
CAC0003 PushBell 230V Wired Push Button, CAC0003, PushBell 230V Wired Push Button, Wired Push Button, Push Button, Button
SCS Sentinel CAC0003 Pushbell 230V Wired Push Button [pdf] User Guide
4789, CAC0003 Pushbell 230V Wired Push Button, CAC0003, Pushbell 230V Wired Push Button, Wired Push Button, Push Button, Button

References

Leave a comment

Your email address will not be published. Required fields are marked *