ENVEOLI1403023_V2 – End of Life
Instructions – Harmony GTU Box Module
Harmony GTU Box Module
Harmony GTU
Product End of Life
Instructions
Potential disassembly risks
The Circularity profile provides information about preparation for re-use and treatment. It identifies the relevant EEE components and materials as well as their location. Safety instructions for product dismantling and depollution are provided into the User manual or maintenance guide.
WARNING
HAZARD OF ARC FLASH OR FIRE
- Disconnect battery terminals before disassembly
- Avoid any electrical connection between the terminals
Failure to follow these instructions can result in death or serious injury.
End of Life Instructions
| Recommendation | Number on drawing | Component / Material | Weight (in g) | Comment |
| Potential hazards | 1 | Batteries | 2.5 | |
| To be depolluted | 2 | Electronic Board (Communication) > 10cm² | 278.2 | PCBA |
| Other | 639.3 | |||
Product description
| Manufacturer identification | Schneider Electric Industries SAS |
| Brand name | Schneider Electric |
| Product function | High connectivity with a wide range of industrial controllers |
| Product reference | HMIG5U |
| Additional similar product references | HMIG5U2 HMIG5U21 HMIG5U22 HMIG3U HMIG3UFC HMIG2U |
| Total representative product mass | 920 g |
| Representative product dimensions | 131mm x 188mm x 35mm |
| Accessories | No |
| Date of information release | 2024/2/1 |
Additional information
| Legal information | This product family is in the scope of European Union directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). The product family must be disposed according to the legislation of the country. This document is intended for use by end of life recyclers or treatment facilities. It provides the basic information to assure an appropriate end of life treatment for the components and materials of the product. | |
| Recyclability potential | 57% | Recyclability rate has been calculated based on REEECY’LAB tool developed by Ecosystem, for components/materials not covered by the tool, data from the “ECO’ DEEE recyclability and recoverability calculation method” was taken. If no data was found a conservative assumption was used (0% recyclability). |
Schneider Electric Industries SAS
Country Customer Care Center
http://www.se.com/contact
35, rue Joseph Monier
CS 30323
F- 92500 Rueil Malmaison Cedex
RCS Nanterre 954 503 439
Capital social 928 298 512 €
www.se.com
ENVEOLI1403023_V2
Published by Schneider Electric
© 2023 – Schneider Electric
All rights reserved
Documents / Resources
 | Schneider Electric HMIG2U Harmony GTU Box Module [pdf] Instructions HMIG5U, HMIG5U2, HMIG5U21, HMIG5U22, HMIG3U, HMIG3UFC, HMIG2U, HMIG2U Harmony GTU Box Module, HMIG2U, Harmony GTU Box Module, GTU Box Module, Box Module |