schlage-logoSCHLAGE CO-100 Keypad Electronic Lock

Prepare door

SCHLAGE-CO-100-Keypad-Electronic-Lock-1

If insulator strip is present, carefully remove it.

SCHLAGE-CO-100-Keypad-Electronic-Lock-2

Install sex bolts to secure device.

SCHLAGE-CO-100-Keypad-Electronic-Lock-3

Install grommet.

SCHLAGE-CO-100-Keypad-Electronic-Lock-4

Install device per manufacturer instructions.

SCHLAGE-CO-100-Keypad-Electronic-Lock-5

Install spindle into assembly.

SCHLAGE-CO-100-Keypad-Electronic-Lock-6

Check lever handing.

SCHLAGE-CO-100-Keypad-Electronic-Lock-7

Install cylinder and lever.

SCHLAGE-CO-100-Keypad-Electronic-Lock-8

Install outside assembly

SCHLAGE-CO-100-Keypad-Electronic-Lock-9

Install inside assembly.

SCHLAGE-CO-100-Keypad-Electronic-Lock-10

Install cover and screw.

SCHLAGE-CO-100-Keypad-Electronic-Lock-11

Install batteries.

SCHLAGE-CO-100-Keypad-Electronic-Lock-12

Set up lock.

After installing the lock, see the user guide for setup and operation.

Lever Removal

SCHLAGE-CO-100-Keypad-Electronic-Lock-13

Changing the cylinder’s tailpiece

SCHLAGE-CO-100-Keypad-Electronic-Lock-14

  • Remove USB plug.SCHLAGE-CO-100-Keypad-Electronic-Lock-15
  • Remove cover from baseplate.SCHLAGE-CO-100-Keypad-Electronic-Lock-16
  • Remove spring cage.SCHLAGE-CO-100-Keypad-Electronic-Lock-17
  • Move lever stop to opposite side − Align arrow with latch.SCHLAGE-CO-100-Keypad-Electronic-Lock-18
  • Reinstall springcage.SCHLAGE-CO-100-Keypad-Electronic-Lock-19
  • Reassemble cover and baseplate.

IMPORTANT: Do not pinch the ribbon cable duringreassembly. Vuelva a ensamblar la cubierta y la placa base.

Documents / Resources

SCHLAGE CO-100 Keypad Electronic Lock [pdf] Instruction Manual
CO-100, CO-200, CO-250, CO-100 Keypad Electronic Lock, CO-100, Keypad Electronic Lock

References

Leave a comment

Your email address will not be published.