SCHLAGE logo

Installation InstructionsSCHLAGE BE467F Smart Deadbolt - br codeSchlage Control™
Smart Deadbolt
Model BE467F

SCHLAGE BE467F Smart Deadbolt - fig

Tools Needed

  • Phillips screwdriver
  • Tape measure

Optional

  • Flathead screwdriver
  • Torx™ screwdriver

Door preparation:
See template in package.
Contact Product Support
1-877-671-7011.

ENGAGE™ WEB & MOBILE APPLICATIONS

Search for “Allegion ENGAGE” in the Apple App Store or Google Play store to download the app.
Navigate to portal.allegionengage.com to access your account online.

Access online interactive instructions, user guide, warranty, and reference information.SCHLAGE BE467F Smart Deadbolt - qr code

https://alle.co/control

IMPORTANT NOTES

  • Install and test lock with door open to avoid being locked in or out.

CAUTION
Use provided bolt!
Do NOT use a power drill for installation!

Check door dimensions.
See consumer.schlage.com/Service-Support for door preparation instructions if dimensions are different.SCHLAGE BE467F Smart Deadbolt - dimensions

Install the lock

Install bolt and strike.

CAUTION
Use provided bolt!

1a Adjust bolt length, if necessary. SCHLAGE BE467F Smart Deadbolt - Adjust bolt

Measure the backset. If the measurement is 2C\,” (60 mm) no adjustment is necessary.

If the measurement is 2C\v” (70 mm), extend the bolt.SCHLAGE BE467F Smart Deadbolt - button

1b If desired, change to the square-corner faceplate.

SCHLAGE BE467F Smart Deadbolt - screwdriver
Use a flathead screwdriver to pry the faceplate off. Press the square-corner faceplate into place.

Install the strike into the frame.

Drill pilot holes Z\,” x 3” deep, 2 places.

SCHLAGE BE467F Smart Deadbolt - strike into
Reinforcement strike Strike and reinforcement plate
SCHLAGE BE467F Smart Deadbolt - Actual Size
Actual Size

Install the outside assembly.

CAUTION
If the bolt does not remain retracted throughout installation, locking and unlocking could be reversed, resulting in an unsecured residence.

Install the outside assembly on the outside of the door.SCHLAGE BE467F Smart Deadbolt - door

Install the inside assembly.

CAUTION
If the cam is not in the correct position during installation, locking and unlocking could be reversed, resulting in an unsecured residence.

4a Make sure the cam on the inside assembly is in the correct position.SCHLAGE BE467F Smart Deadbolt - fig 1

4b Install the inside assembly on the inside of the door.

CAUTION
Bolt must remain retracted!SCHLAGE BE467F Smart Deadbolt - retracted

4c Secure the inside assembly with two screws.
Fan off ICON If the screw holes are blocked by the cam, see step 4a.
SCHLAGE BE467F Smart Deadbolt - Actual Size 1

4d Connect the cable to the inside assembly.
CAUTION
The connector fits only one way.
DO NOT FORCE!SCHLAGE BE467F Smart Deadbolt - Red wire

4e Install the batteries.SCHLAGE BE467F Smart Deadbolt - batteries

4f Install the inside cover.SCHLAGE BE467F Smart Deadbolt - cover

4g Secure the inside cover with two screws.SCHLAGE BE467F Smart Deadbolt - screws

Test the Lock

Extend and then retract the bolt using the inside bolt throw.SCHLAGE BE467F Smart Deadbolt - Lock

Fan off ICONOutside bolt throw should spin freely until a valid credential is presented.

Set up the lock.

Access online interactive instructions, user guide, warranty, and reference information.SCHLAGE BE467F Smart Deadbolt - qr code 1

alle.co/control

Customer Service
1-877-671-7011
www.allegion.com/usSCHLAGE BE467F Smart Deadbolt - fig 2© Allegion 2020
Printed in the U.S.A.
47327849 Rev. 10/20-a

Documents / Resources

SCHLAGE BE467F Smart Deadbolt [pdf] Instruction Manual
BE467F, Smart Deadbolt

Leave a comment

Your email address will not be published.