sauermann logo

sauermann DBM 620 Air Flow Meter

sauermann DBM 620 Air Flow Meter Kit

Start guide

The DBM 620 air flow meter allows control and balancing of airflow in air conditioning system. Operating temperature: -5 to +50 °C; Protection: IP40

Unfold the required framesauermann DBM 620 Air Flow Meter Kit 1

  • 2 x 2’ 610 x 610 mm
  • 3.35 x 3.35’ 1020 x 1020 mm
  • 2.36 x 2.36’ 720 x 720 mm
  • 2.36 x 4.33’ 720 x 1320 mm
  • 1.38 x 4.99’ 420 x 1520 mm

Mount the frame with the hood

  • The frame elastomer joint must be placed towards the outside.
  • Fix the strips before stretching the hood on the frame’s corners. Do not tight fully the strips: in order not to damage the hood cloth, it is recommended to adjust the strips tightening at the end of the mounting.
  • Stretch the hood on the frame’s corners.
    Once the first mounting carried out, a complete disassembly is not necessary: the frame assembly can be stored with the hood mounted on the base.sauermann DBM 620 Air Flow Meter Kit 2

Mount the hood + frame assembly on the base

  • Check that the self-adhering trip to fix the hood on the base is not fixed.
  • The transparent part must be oriented towards the user. The coloured strip inside the hood is a visual mark: it must be placed on the opposite side of the user. This coloured marked strip has to be positioned in front of the arrow mark of the base. Position the frame’s corners with retaining stops towards the window side of the hood.
  • Tighten and fix the self-adhering trip to fix the hood on the base.sauermann DBM 620 Air Flow Meter Kit 3

Position the rods

  • Put the rods inside the hood. Place the rods on the dedicated receipt cups then adjust them on the opposite corner of the hood.
  • Position the rods to cross on the transparent side of the hood and on the opposite side of the transparent part.
  • Adjust the strips tightening.sauermann DBM 620 Air Flow Meter Kit 4

Insert the batteries in the module

  • Remove the batteries cover (1).
  • Insert batteries* respecting carefully the polarity.
  • Replace the batteries cover.
  • Connect the DBM 620 modulesauermann DBM 620 Air Flow Meter Kit 5

Download SmartKap App

  • Flash the QR code to download SmartKap application on your smartphone or tablet.
    OR
  • Write “SmartKap” in the search bar then validate.
  • Download SmartKap application by pressing its icon.
  • Follow your mobile device indications.sauermann DBM 620 Air Flow Meter Kit 6sauermann DBM 620 Air Flow Meter Kit 7

Connect the mobile device and the DBM 620 module
Wireless connection must be activated on the mobile device.

  • Switch on the DBM 620 module by pressing the housing module.
  • Launch SmartKap application by pressing its icon.
  • The application opens automatically in “Balometer” mode. If required, select “Manometer“ mode.
  • Press “Connect a device” then “Search for devices”.
  • Press the line of the required device then “Connect”.sauermann DBM 620 Air Flow Meter Kit 8

Display measurements

  • In “Balometer“ mode, select the air vent type. Position the air flow meter thanks to the animation explaining how to position correctly the air flow meter on the air vent then press “Close”.sauermann DBM 620 Air Flow Meter Kit 9
  • In “Manometer“ mode, set the differential pressure device, type and dimensions. Position correctly the differential pressure device on the required location then press “Rec”.sauermann DBM 620 Air Flow Meter Kit 10

*4 alkaline batteries LR6 AA 1.5V Google Play and the Google Play logo are trademarks of Google LLC. / App Store is a service mark of Apple Inc.

Documents / Resources

sauermann DBM 620 Air Flow Meter Kit [pdf] User Guide
DBM 620, Air Flow Meter Kit, DBM 620 Air Flow Meter Kit

References

Leave a comment

Your email address will not be published.