SATECHI ST-ACBKM Compact Backlit Bluetooth Keyboard
USE INSTRUCTIONS
- Turn on power switch on the top side of the Keyboard. Make sure the slider is green.
- Press and hold one of Bluetooth keys for ~3 seconds to assign a device to it. Blue LED light should start blinking.
- On the host device, look for “Compact Keyboard” and connect to pair. The blue LED light will stop blinking.
- Repeat process to add up to 3 Bluetooth devices. Toggle between connected devices by pressing Bluetooth 1, 2, or 3 button.
- After 30 minutes of inactivity, the keyboard will go into sleep mode. Press any key to wake up.
- Charge the keyboard via the powered USB port using either of the included USB-C or USB-A cables. When battery is low, the power indicator will flash green.
To remove all saved Bluetooth devices, press and hold
“Fn + Shift (left) + Delete”. All three indicator LEDs will light up once
Use additional keyboard shortcuts:
Task manager/sleep/wake: | Control+Option+Delete |
Forward delete: | Control+D |
Page top/bottom: | Alt Opt + Home Alt Opt + End |
Function Lock | Fn+Esc |
Documents / Resources
![]() | SATECHI ST-ACBKM Compact Backlit Bluetooth Keyboard [pdf] User Guide ST-ACBKM, Compact Backlit Bluetooth Keyboard |