SAMSUNG -logor

19.5 cu. ft. French Door
MODEL RF20A5101 DIMENSIONS

Be sure your new fridge will fit

Don’t wait until delivery to be sure your new refrigerator will fit – both in your kitchen and through all doorways. This guide includes all pertinent measurements and clearances so you can buy with confidence.

SAMSUNG 19.5 cu. ft. French Door-

Standard Depth Refrigerator

Standard depth refrigerators typically measure 30 to 35 inches in depth, as opposed to counter depth refrigerators that sit flush with cabinetry.

SAMSUNG 19.5 cu. ft. French Door-DRAWER OPEN

SAMSUNG 19.5 cu. ft. French Door-DRAWER OPEN1

SAMSUNG 19.5 cu. ft. French Door-Refrigerator

Installation clearances

SAMSUNG -iconAllow 3 ¾” of clearance when installing along a wall. This will allow for the door to open 90 degrees without the handle contacting the wall.
SAMSUNG -iconAllow 2″ minimum clearance at rear for proper air circulation and water/electrical connections.
SAMSUNG -iconAllow a ⅜” minimum clearance at sides and top for ease of installation.
For optimal usage and ability to open refrigerator doors completely, do not install next to a wall.
Please note: The above dimension and cutout information is for planning purposes only. For complete installation details, consult manual packed with product or download manual online at samsung.com.

Walk the delivery route

SAMSUNG -iconIdentify the narrowest opening that the appliance will travel through, from outside the home to the location where it will be installed.
SAMSUNG -iconAppliance depth or width must be smaller than the width of the narrowest opening

Documents / Resources

SAMSUNG 19.5 cu. ft. French Door [pdf] User Manual
SAMSUNG, 19.5 cu. ft., French Door, RF20A5101, DIMENSIONS

References

Leave a comment

Your email address will not be published.