IW10 WiFi Adapter Module
“
Product Specifications
- Model: IW10
- Input: AC 100 – 240V, 50 – 60Hz, 0.3A
- Output: 5.0V 1.0A, 5.0W
- Frequency: 2405-2480MHz
Product Usage Instructions
Setup Process
- Connect the IW10 WiFi Adapter Module to a power source within
the input voltage range specified. - Ensure the WiFi Adapter Module is in range of your inverter
device. - Follow the inverter’s instructions to enable WiFi
connectivity.
Key Features
- Enables WiFi connectivity for your inverter device.
- Supports a frequency range of 2405-2480MHz.
- Compact design for easy installation.
Essential Usage Tips
- Keep the WiFi Adapter Module firmware updated for optimal
performance. - Avoid placing the module in areas with high interference to
ensure stable connection. - Refer to the user manual of your inverter device for specific
WiFi setup instructions.
Frequently Asked Questions (FAQ)
Q: How can I check if the WiFi Adapter Module is properly
connected?
A: You can usually check the status of the connection through
the indicator lights on the module or the associated app on your
device.
Q: Can I use the IW10 WiFi Adapter Module with any inverter
model?
A: The compatibility may vary, so it’s recommended to check the
compatibility list or consult with the manufacturer before use.
“`
WIFI ADAPTER MODULE FOR INVERTER Model: IW10
Quick Guide
MULTI-LANGUAGE MANUAL
HEAD OFFICE
SALUS Controls, Units 8-10, Northfield Business Park, Forge Way, Parkgate Rotherham, S60 1SD
SALUS Controls GmbH, Dieselstrasse 34, 63165 Mühlheim am Main, Germany
UK: tech@salus-tech.com DE / NL: info@salus-controls.de FR: technicalsupport@saluscontrols.fr RO: tehnic@saluscontrols.ro DK: Support@salus-controls.dk
INPUT: AC 100 – 240V, 50 – 60Hz, 0.3A
OUTPUT: 5.0V 1.0A, 5.0W
www.saluscontrols.com
Introduction
The IW10 WiFi Adapter Module is an advanced connectivity solution designed specifically for inverters, enabling seamless remote monitoring and control of your system via a wireless network. This compact and easy-to-install module allows users to connect their inverter to a local WiFi network, providing real-time access to performance data, status updates, and system diagnostics through a user-friendly mobile app or web interface. Whether you’re at home or on the go, the IW10 ensures that you have complete oversight of your inverter’s operation, helping to optimize performance, increase energy efficiency, and quickly address any issues that may arise.
This guide will take you through the setup process, key features, and essential usage tips, ensuring a smooth and hassle-free experience with your IW10 WiFi Adapter Module.
Product Compliance
This product complies with the essential requirements and other relevant provisions of Directives 2014/30/EU, 2014/35/EU, 2014/53/EU and 2015/863/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.saluslegal.com.
2405-2480MHz; <20dBm (Wifi).
Safety Information
It is important to use the IW10 WiFi Adapter Module in accordance with all applicable regulations to ensure both safety and performance. This device is intended for indoor use only and should not be installed in outdoor or exposed environments where it may encounter moisture, extreme temperatures, or other external elements. Always keep the device completely dry, exposure to liquids could cause damage or malfunction. When cleaning the device, always disconnect it from power and use only a dry cloth to avoid introducing moisture.
Additionally, the IW10 module is designed to be installed at heights of 2 meters or lower to ensure easy access and safe operation. The maximum allowable operating temperature for the device is 45°C, so be sure to avoid placing it in areas that may exceed this limit to prevent overheating or damage. By following these guidelines, you will ensure the long-term functionality and reliability of the IW10 WiFi Adapter Module.
Product description
1
2
3
4
LED Signal & Status
LED Signal
Status
Cloud – Dongle is connected to the cloud
WiFi – Dongle is connected to the WiFi router
Comm – Communication between the dongle and the inverter is correct
WiFi – Dongle is in WiFi Setup mode
Cloud
WiFi – Dongle is in Factory Reset mode
Comm
– Firewall or Network Restrictions: Ensure no firewall is blocking the dongle’s connection to the cloud. Cloud – Disable any firewall to stop connection to remote port 443 and 8443 WiFi – Check your Internet connection to any Website, e.g. www.bing.com – Check your broadband provider if the Internet is not working
Cloud – Dongle is not connected to the cloud
– WiFi Setup is not correct.
WiFi
– Possible reason: WiFi password is not correct
– Check the RJ45 plug, make sure the plug is fully inserted on the RJ45 socket. – Check the status of the Inverter, make sure the battery and main power
Comm
supply is connected. – Contact the distributor of the Inverter for technical support.
Legend
Flashing Light Solid Light
Installation:
Installation: The mounting height is less than 2m The maximum operating temperature is 45°C.
To perform the installation, a cable with an RJ45 Ethernet connector on one end and a round aviation plug on the other will be used. This cable has the purpose to set the connection of the IW10 Dongle to the Single or Triple phase inverter.
Cable with RJ45 and Round aviation plug Note: Max. output of power supply source for WIFI Adapter module is less 15W
1
Reset
SALUS Controls is a member of the Computime Group Maintaining a policy of continuous product development SALUS Protect which is made up SALUS Controls and Safe4 reserves the right to change specification, design and materials of products listed in this brochure without prior notice.
V05 07/2025
1. Cloud , WiFi, Comm LEDs 2. SETUP button
3. RESET button 4. RJ45 Ethernet port
Insert the RJ45 Ethernet plug to the socket of the IW10 Dongle.
1
2
SINGLE PHASE INVERTER
6
7
14
15
5
Insert the aviation plug
on the COM1 of the inverter.
TRIPLE PHASE INVERTER
Select Equipment. 8
Select Inverters. 9
Insert the aviation plug on the COM1 of the inverter.
3 Make sure that you have downloaded the SALUS Premium Lite App from the Google Play or App Store.
To discover and add devices, and to access all features, please ensure that the SALUS Premium Lite app has all necessary permissions (e.g. location and Bluetooth).
4
5
Select the Add an inverter option. 10
Select in Connect via WiFi. 11
Cloud WiFi Comm
Make sure the WiFi adapter is powered on and searching for WiFi connection
(WiFi Setup mode).
Select Setup with Bluetooth.
12
13
Sign in or create an account.
Select the top-right Menu option.
App is searching for devices.
Select the Inverter.
Select the WiFi network. 16
Provide the password. 17
Wait for the connection to be established.
The inverter has been associated.
18
Cloud WiFi Comm
After successful setup, the 3 LEDs will be all green.
SETUP Button & Functionalities
Cloud WiFi Comm
Cloud WiFi Comm
Cloud WiFi Comm
3 sec
10 sec
13 sec
Press and hold for 3 seconds and release to enter WiFi setup mode
Press and hold for 10 seconds, three LEDs turn to orange, and release to conduct a factory reset
RESET button
Press and release to reset the dongle
You need a needle to conduct the action press and release
Press and hold for more than 13 seconds, return to normal mode, without any action.
Reset
Documents / Resources
 | SALUS IW10 WiFi Adapter Module [pdf] User Guide IW10 WiFi Adapter Module, IW10, WiFi Adapter Module, Adapter Module, Module |