the Dose Control™ Pro
Dose Control™ Pro

SAGE® RECOMMENDS SAFETY FIRST

At Sage® we are very safety conscious. We design and manufacture appliances with your safety foremost in mind. In addition, we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.

IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE:
  • A downloadable version of this document is also available at sageappliances.com
  • Before using the first time ensure your electricity supply is the same as shown on the label on the underside of the appliance.
  • Remove and safely discard any packaging materials before first use.
  • To eliminate a choking hazard for young children, safely discard the protective cover fitted to the power plug.
  • This appliance is for household use only. Do not use the appliance for anything other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors. Misuse may cause injury.
  • Fully unwind the power cord before operating.
  • Position the appliance on astable, heat resistant, level, dry surface  away from the edge and do not operate on or near a heat source such as a hot plate, oven or gas hob.
  • Do not let the power cord hangover the edge of a bench or table, touch  hot surfaces or become knotted.
  • Do not leave the appliance unattended when in use.
  • Always ensure the appliance is turned OFF, unplugged at the power outlet and has been allowed to cool before cleaning, attempting to move or storing.
  • Always turn the appliance to the OFF position, switch off at the power outlet and unplug at the power outlet when the appliance is not in use.
  • Do not use the appliance if the power cord, plug, or appliance becomes damaged in any way. If damaged and maintenance other than cleaning is required please contact Sage Customer Service or go to sageappliances.com
  • Any maintenance other thancleaning should be performed by an  authorised Sage® service centre.
  • Children should not play with the appliance.
  • Cleaning of the appliance should not be carried out by children unless they are 8 yearsor older and supervised.
  • The appliance and its cord should be kept out of reach of children aged 8 years and younger.
  • The installation of a residual current safety switch is recommended to provide additional safety when using all electrical appliances. Safety switches with a rated operating current not more than 30mA are recommended. Consult an electrician for professional advice.
  • Do not use attachmentsother than those provided with the appliance.
  • Do not attempt to operatethe appliance by any method other than those  described in this booklet.
  • Do not move the appliancewhilst in operation.
  • Do not touch hot surfaces. Allow the appliance to cool down before moving or cleaning any parts.
  • This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
  • This appliance can be used by persons with reduced physical, sensory or mental capabilities or a lack of experience and knowledge, only if they have been given supervision or instruction concerning use of the appliance in a safe way and understand  the hazards involved.
  • Do not operate the grinder without the hopper lid in position. Keep fingers, hands, hair, clothing and utensils away from the hopper during operation.

The symbol shown indicates that this appliance should not be disposed of in normal household waste. It should be taken to a local authority waste collection centre designated for this purpose or to a dealer providing this service. For more information, please contact your local council office.

 

To protect against electric shock, do not immerse the power plug, cord or appliance in water or any liquid.

 

GETTING TO KNOW YOUR NEW APPLIANCE

Know About Product

A. Bean Hopper Lid
B. Bean Hopper
C. Hardened Stainless Steel Conical Burrs. Removable and Adjustable Upper Burr
D. Grind Size Collar
E. GRIND TIME Dial
F. START / CANCEL Button
G. Grind Outlet
H. 50mm blade
I. Grind Tray
ACCESSORIES
J. Adjustable Razor™ Dose Trimming Tool
K. Portafilter Cradle 50–54mm
L. Portafilter Cradle 58mm

OPERATING YOUR NEW APPLIANCE
BEFORE FIRST USE

Remove and safely discard all promotional labels and packing materials attached to your Sage® appliance. Wash hopper, and cradles in warm soapy water and dry thoroughly. Wipe exterior of grinder with a soft damp cloth and dry thoroughly.
Place grinder on fl at level surface and plug power cord into 220-240V outlet and switch Power ‘ON’.

ASSEMBLING YOUR SAGE CONTROL DOSE™ PRO
Bean Hopper

Align tabs on the base of the bean hopper and insert hopper into position. Holding the hopper, press down fi rmly and turn the bean hopper dial 45° to lock into position.
A “click” sound will be heard when the hopper is properly locked in place.

Bean Hopper

Fill with fresh coffee beans and secure lid on top of bean hopper.

GRINDING FOR ESPRESSO COFFEE

Use single wall fi lter baskets when grinding fresh coffee beans. Use the fi ner 1–25 settings in the ESPRESSO range.

GRINDING

Step 1: Insert the appropriate portafi lter cradle size. Insert your portafi lter into the cradle.

GRINDING

Step 2: Selecting Grind Amount Select the desired amount of ground coff ee required by turning the GRIND TIME dial.

Grind Time

Step 3:
Tamping the Ground Coffee
After dosing the portafi lter with freshly ground coffee, tamp down with between 15-20kg of pressure.

Step 4:
Trimming the Dose
The adjustable Razor™ Dose Trimming Tool allows you to trim the puck to the right level for a consistent extraction. Select the correct width blade of the Razor™ to match the diameter of your fi lter basket. The
Razor™ has three blades of varying widths: 58mm, 54mm and 50mm. The 58mm and 54mm are already fi tted within the Razor™ body. The 50mm is separate.
If you require the 50mm blade, turn the adjustment dial past #1 until the 54mm blade is fully extended and able to be pulled from the body.

Trimming

If you require the 50mm blade, turn the Adjustable Dial past #1 until the 54mm blade is fully extended and able to be pulled from the body.
Trimming
Insert the 50mm blade into the body. Wind the Adjustable Dial until the blade is retracted past #4. Press the 50mm and 58mm blades at the same time, towards the centre of the body until a “click” sound can be heard.
Trimming
Adjust the Razor™ to the setting in the table below for your Sage® espresso machine. This is a starting point for your dose height.
Instruction
After tamping the coffee, insert the Razor™ into the filter basket until it rests on the rim of the basket. The blade of the dosing tool should penetrate the surface of the tamped coffee.
If the blade does not penetrate the surface of the tamped coffee, your coffee is under dosed.
Increase the amount of dosed coffee by adjusting the GRIND TIME dial.
Rotate the Razor™ back and forth while holding the portafilter on an angle over the knock box to trim off a little excess coffee.

OPERATING

Step 5:
Select Your Grind Size
For espresso, we recommend starting with grind size setting 15 and rotating the Hopper (to adjust the Grind Size Collar) either coarser or finer.

Grind Size

GRINDING INTO A GRINDS CONTAINER OR COFFEE FILTER

Step 1:
Remove cradle by sliding out from under the grind outlet.

GRINDING

Place your container or coffee filter directly under grind outlet.

GRINDING

Step 2:
Select the required amount of ground coff ee by rotating the GRIND TIME dial.
Step 3:
Select Your Grind Size
Rotate the Hopper to adjust the Grind Size Collar until it reaches the required brewing method range.

FEATURES OF YOUR SAGE DOSE CONTROL™ PRO
Pause Function

You can pause the grinder during operation, allowing you to collapse or settle the coffee in the Portafilter.

  • Press the START / CANCEL button to start the grinding operation.
  • During grinding, press the START / CANCEL button to pause the grinding operation for up to 10 seconds.The START / CANCEL button will slowly fl ash while  paused.
  • Press START / CANCEL again within this time to resume grinding the remaining dose. Or press and hold the START / CANCEL button for 1 second to cancel.
Manual

Grinding manually allows you to have complete control over how much coffee is dispensed.

  • Press and hold the START / CANCEL button to grind for as long as you require.
  • Release START / CANCEL button to stop grinding.

COFFEE CHART*

*This coffee chart should be used as starting point to adjust your grind time and / or size, as both may vary when using different coffee bean types, age and degree of roast.

ADJUSTING CONICAL BURRS

Some types of coff ee may require a wider grind range to achieve an ideal extraction or brew.
A feature of your Dose Control™ Pro is the ability to extend this range with an adjustable upper burr.

ADJUSTING CONICAL BURRS

CARE, CLEANING & STORAGE
  1. Empty beans from the hopper and grind out any excess beans (see below).
  2. Unplug power cord from power outlet before cleaning.
  3. Wash the hopper lid and bean hopper in warm soapy water, rinse and dry thoroughly.
  4. Wipe and polish exterior of appliance with a soft damp cloth.
CLEANING CONICAL BURRS

Regular cleaning helps the burrs achieve consistent grinding results which is especially important when grinding for espresso coffee.

CLEANING CONICAL BURRS

TROUBLESHOOTING

TROUBLESHOOTING

GUARANTEE
2 YEAR LIMITED GUARANTEE

Sage Appliances guarantees this product for domestic use in specified territories for 2 years from the date of purchase against defects caused by faulty workmanship and materials. During this guarantee period Sage Appliances will repair, replace, or refund any defective product (at the sole discretion of Sage Appliances). All legal warranty rights under applicable national legislation will be respected and will not be impaired by our guarantee. For full terms and conditions on the guarantee, as well as instructions on how to make a claim, please visit www.sageappliances.com.

 

Sage SCG600 Dose Control Pro Coffee Grinder Instruction Manual – Optimized PDF
Sage SCG600 Dose Control Pro Coffee Grinder Instruction Manual – Original PDF

Leave a comment

Your email address will not be published.