Ruko F11GIM2 Drone 4K Camera
Product Information
- Age Recommendation: 14+
- User Manual Version: v2.0
Contact Information
- +1 888 892-0155 (Mon-Fri 7:00AM – 7:00PM PST)
- +86 19129317359
Contents
This user manual contains information on how to use the product, as well as safety precautions and troubleshooting tips.
Package Contents
- Drone
- Remote Controller
- Drone Battery
- Gimbal Cover
- Spare Propeller
- USB Charging Cable
- User Manual
- Allen Wrench
- Screw
Preface
Thank you for purchasing the Ruko-Series GPS aircraft. Please read all instructions and warnings carefully before operating. Please also keep this instruction manual for future reference and maintenance.
Important Safety Precautions
This R/C aircraft can be dangerous when in use, please make sure you keep it far away from any persons or spectators when flying. Incorrect installation, poor conditions, or users not familiar with
operation may cause damage to the aircraft or injure people or may cause an unexpected accident. Please pay close attention to flying safety and learn to recognize more dangerous conditions which may cause an accident due to your own negligence.
Product Usage Instructions
Read Before the First Flight
Before flying the drone, it is important to read the user manual and familiarize yourself with the product’s features, controls, and safety precautions.
Video Tutorials
Scan the QR code provided in the manual to watch guide videos that demonstrate how to use the Ruko drone.
Download the App
Scan the QR code provided in the manual to download the RUKO DRONE app. The app is available for both Apple iOS (compatible with iOS v9.0 and later) and Android (compatible with Android v5.0 and later) operating systems.
Remote Controller
Controller Features
The user manual provides detailed information on the features and functions of the remote controller.
Controlling the Drone
The user manual provides instructions on how to control the drone using the remote controller.
Optimal Transmission Zone
The user manual explains the optimal transmission zone for the drone and provides guidance on maintaining a stable connection between the drone and the remote controller.
Emergency Stop
The user manual provides instructions on how to perform an emergency stop in case of any issues or emergencies during flight.
Charging the Controller
The user manual provides instructions on how to charge the remote controller.
Drone
Preparing the Aircraft
The user manual provides instructions on how to prepare the drone for flight, including assembly and setup.
Drone Diagram
The user manual includes a diagram that illustrates the different parts and components of the drone.
Assemble the Propeller
The user manual provides step-by-step instructions on how to assemble the propeller on the drone.
Intelligent Flight Battery
The user manual provides information on the intelligent flight battery used by the drone, including charging and handling instructions.
Gimbal and Camera
The user manual provides information on the gimbal and camera system of the drone, including usage instructions and maintenance tips.
Drone Status Indicators
The user manual explains the different status indicators on the drone and their meanings.
Product Functions Profile
Return to Home
The user manual provides information on the “Return to Home” function of the drone, including how to activate it and its purpose.
Waypoint Flight
The user manual provides information on the “Waypoint Flight” function of the drone, including how to set waypoints and control the flight path.
Point of Interest
The user manual provides information on the “Point of Interest” function of the drone, including how to set a point of interest and control the drone’s movements around it.
GPS Follow Me
The user manual provides information on the “GPS Follow Me” function of the drone, including how to activate it and how the drone tracks and follows the user’s movements.
Image Recognition Follow Me
The user manual provides information on the “Image Recognition Follow Me” function of the drone, including how to activate it and how the drone uses image recognition to track and follow the user.
Hand Gesture
The user manual provides information on the “Hand Gesture” function of the drone, including how to activate it and the different hand gestures recognized by the drone.
Connect the APP
Download the APP
The user manual provides instructions on how to download the RUKO DRONE app for your specific operating system.
Connect the APP with Drone
The user manual provides instructions on how to connect the RUKO DRONE app with the drone for enhanced control and functionality.
APP Functions
Control
The user manual provides information on the various control functions available through the RUKO DRONE app.
APP Icons Introduction
The user manual explains the different icons and symbols used in the RUKO DRONE app and their meanings.
APP Setting
Setting
The user manual provides instructions on how to access and customize the settings of the RUKO DRONE app.
APP Functions
APP One Key Share Function
The user manual explains the “One Key Share” function of the RUKO DRONE app, which allows users to easily share their captured photos and videos.
How to Download the Pictures and Videos
The user manual provides instructions on how to download the pictures and videos captured by the drone using the RUKO DRONE app.
Flight
Take Off/Landing Procedures
The user manual provides step-by-step instructions on how to safely take off and land the drone.
Quick Start
The user manual provides a quick start guide for beginners, outlining the basic steps to get the drone in the air.
Specifications
Drone
The user manual provides detailed specifications of the drone, including its dimensions, weight, and other technical details.
Gimbal Stabilization
The user manual provides information on the gimbal stabilization system of the drone and its benefits.
Camera
The user manual provides information on the camera specifications of the drone, including resolution and capabilities.
5G Transmission
The user manual provides information on the 5G transmission capabilities of the drone, including its range and stability.
APP/Live View
The user manual provides information on the live view feature of the RUKO DRONE app, which allows users to see real-time footage from the drone’s camera.
Remote Controller
The user manual provides specifications and details about the remote controller, including its range and battery requirements.
Intelligent Flight Battery
The user manual provides specifications and details about the intelligent flight battery used by the drone, including its capacity and charging requirements.
Charging Cable: Type-c
The user manual specifies that the charging cable used for the drone is of Type-C standard.
Common Problems
The user manual provides a troubleshooting section that addresses common issues and problems that users may encounter while operating the drone.
Accessories Support
The user manual provides information on support for additional accessories that can be used with the drone.
14+
for age
User Manual
v2.0
CONTACT US FOR MORE TECH SUPPORT +1 888
892-0155 Mon-Fri 7:00AM – 7:00PM (PST)
CONTACT US FOR MORE TECH SUPPORT +1 888
892-0155 Mon-Fri 7:00AM – 7:00PM (PST)
+86 19129317359
Contents
1 Using This Manual
4
1.1 Legend
4
1.2 Read Before the First Flight
4
1.3 Video Tutorials
4
1.4 Download the App
4
2 Package Contents
5
3 Preface
6
4 Warning
10
5 Fly Safety
13
6 Remote Controller
15
6.1 Controller Features
15
6.2 Controlling the Drone
16
6.3 Optimal Transmission Zone
21
6.4 Emergency Stop
21
6.5 Charging the Controller
22
7 Drone
22
7.1 Preparing the Aircraft
22
7.2 Drone Diagram
23
7.3 Assemble the Propeller
23
7.4 Intelligent Flight Battery
24
7.5 Gimbal and Camera
24
Copyright ©2023 Ruko All Rights Reserved. 1
8 Drone Status Indicators
27
9 Product Functions Profile
28
9.1 Return to Home
28
9.2 Waypoint Flight
30
9.3 Point of Interest
31
9.4 GPS Follow Me
32
9.5 Image Recognition Follow Me
32
9.6 Hand Gesture
33
10 Connect the APP
33
10.1 Download the APP
33
10.2 Connect the APP with Drone
33
11 APP Functions
34
11.1 Control
34
11.2 APP Icons Introduction
35
12 APP Setting
36
12.1 Setting
36
13 APP Functions
38
13.1 APP One Key Share Function
38
13.2 How to Download the Pictures and Videos
40
14 Flight
42
14.1 Take Off/Landing Procedures
42
14.2 Quick Start
42
2 Copyright ©2023 Ruko All Rights Reserved.
15 Specifications
44
15.1 Drone
44
15.2 Gimbal Stabilization
44
15.3 Camera
45
15.4 5G Transmission
45
15.5 APP/Live View
45
15.6 Remote Controller
46
15.7 Intelligent Flight Battery
46
15.8 Charging Cable: Type-c
49
16 Common Problems
47
17 Accessories Support
52
Copyright ©2023 Ruko All Rights Reserved. 3
F11GIM2 User Manual
1 Using This Manual
1.1 Legend
The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product :
Recommend
Warning
Hints & Tips
Reference
1.2 Read Before the First Flight
Read the following documents before using Ruko drone. æ User Manual ç Quick Start Guide è Disclaimer and Safety Guidelines It is recommended to watch all the guide videos on our website and read the disclaimer andsafety guidelines before using for the first time.
1.3 Video Tutorials
Scan the QR code to watch the guide videos, which demonstrate how to use Ruko drone.
1.4 Download the App
Scan the QR code downlaod “RUKO DRONE” app.
QR code of “RUKO DRONE” for Apple IOS system.
The IOS version of RUKO DRONE is compatible with IOS v9.0 and later.
QR code of “RUKO DRONE” for Android system.
The operation system version of RUKO DRONE is compatible with Android v5.0 and later.
4 Copyright ©2023 Ruko All Rights Reserved.
2 Package Contents
F11GIM2 User Manual
Drone
Remote Controller
Drone Battery
Gimbal Cover
Spare Propeller USB Charging Cable
User Manual
Allen Wrench
Screw
Copyright ©2023 Ruko All Rights Reserved. 5
F11GIM2 User Manual
3 Preface
Thank you for purchasing the Ruko-Series GPS aircraft. Please read all instructions and warnings carefully before operating. Please also keep this instruction manual for future reference and maintenance.
Important
This product shoud be operated by the people who are over 14 years old. It is a precision device; integrating machinery and electronics with air mechanics and high frequency transmission.It requires correct assembly and debugging to avoid any accident. The user should operate and control this product in a safe manner. In case of incorrect operation, it may cause serious injury or damage property. It can also be lost due to incorrect operation. This product is suitable for experienced UAV pilots no less than 14 years of age. In the event of a problem during using, operating, or maintenance, please contact the local sales agent or retailer or keep in touch with the responsible staff of our company.
Safety Precautions
This R/C aircraft can be dangerous when in use, please make sure you keep it far away from any persons or spectators when flying. In-correct installation, poor conditions, or users not familiar with operation may cause damage to the aircraft or injure people or may cause an unexpected accident. Please pay close attention to flying safety and learn to recognize more dangerous conditions which may cause an accident due to your own negligence.
6
Copyright ©2023 Ruko All Rights Reserved.
F11GIM2 User Manual
Keep it far away from any structures or crowds. This R/C aircraft may vary slightly in speed or sensitivity while flying and can cause potential danger. Therefore, please keep it far away from crowds, buildings, trees, structures, high-voltage wire, etc. Please also avoid flying in adverse weather conditions such as rain, electrical storms, and high winds to ensure safety of the user, any spectators, and surrounding property. Keep it away from any moist environment. The inside of the aircraft is composed of many precision electronic and mechanical parts. Therefore, please try to avoid any moisture or water content from entering the main body of the aircraft as it may cause a breakdown of the mechanical and electronic parts and thus cause an accident. Only operate with included parts for intended use. Please use the original parts made by Ruko-Series for any re-equipping or maintenance to ensure flying safety. Please operate and use only under the scope of the product function permitted. Using un-approved parts will void warranty. DO NOT use for any illegal purpose or use beyond the scope of which your local laws and regulations have stipulated. Avoid controlling it independently. New users may have certain difficulties during the early stages of learning to operate this aircraft. Please try to avoid operating the aircraft alone. When available, always operate this aircraft under the guidance of a more experienced user. Do not operate under the influence of drugs or alcohol. Please operate this R/C aircraft according to your own state and flying skill. Any fatigue, bad mental state, or incorrect operation may increase the probability of accidental risk.
Copyright ©2023 Ruko All Rights Reserved. 7
F11GIM2 User Manual
Do not operate under the influence of drugs or alcohol. Please operate this R/C aircraft according to your own state and flying skill. Any fatigue, bad mental state, or incorrect operation may increase the probability of accidental risk. Please keep a safe range from aircraft when using top speed. When the operator is flying in high speed, please keep the aircraft far from the pilot and any surrounding persons or objects so as not to cause danger or damage. Store it in a cool, dry place. The R/C aircraft is composed of material such as metal, fiber, plastic, electronics, etc. Therefore, please keep it away from any heat source and avoid prolonged exposure to direct sunlight. Excessive heat exposure can cause distortion and damage.
8 Copyright ©2023 Ruko All Rights Reserved.
F11GIM2 User Manual
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer-ence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the use’s authority to operate the equipment.
Copyright ©2023 Ruko All Rights Reserved. 9
F11GIM2 User Manual
4 Warning
There is important information contained in this package and instruction manual, please keep it for future reference.
You have the responsibility to make sure that this model of aircraft won’t cause injury to others’ body or cause any damage to property. Please operate strictly as shown on the instruction manual when debugging or assembling this aircraft. During the process of flying or landing, please pay more attention to keep 1-2 meters between the user and the aircraft to avoid colliding to the head or face or body, which may cause injury. Our company and distributors won’t be responsible for any incorrect operation, which may cause loss or damage or injury to the body. Children ages 14 and up should use this product under the guidance of an adult. This product is FORBIDDEN to be used by children under 14 years old. Please correctly assemble and use this product as shown on the instruction manual or packing instruction. Some parts should be assembled by an adult. Small parts are included with this product. Please place it beyond the reach of the children to avoid a CHOKING HAZARD or parts being mistakenly swallowed. Playing on the road or near high traffic areas is strictly FORBIDDEN so as not to cause an accident. Please dispose of the packing material timely so as not to cause injury to children. Please DO NOT disassemble or re-equip the aircraft as it may cause a breakdown of the aircraft during flying.
10 Copyright ©2023 Ruko All Rights Reserved.
F11GIM2 User Manual
Batteries in the battery compartment of the charger should be inserted into the designated power source which has the same logo as the product. Built-in rechargeable 3.7V lithium polymer battery included in the transmitter. Only the original charging cable make from our factory can be used. Charging cable is not a toy. When charging the battery, please conduct it under the surveillance of an adult. Please also keep it far away from any combustible object when charging. Please keep this aircraft within eyesight when charging. Please DO NOT make it short-circuited or squeeze the battery so as not to cause an explosion. DO NOT mix the Li-ion battery with a different type of battery. Intelligent lithium battery is loaded in the Quad-rotor. Both built-in or external can be used for charging. Please DO NOT make the battery short-circuited or decompose the battery or throw the battery into the fire; DO NOT place the batteries near the high temperature or heated area (such as near the fire or near the electric heating device). The aircraft should be kept far away from any other electric compliance or equipment as far as possible or kept far away from the place where having the magnetic object nearby as they may cause interference with each other. Please keep the safe distance from the high-speed rotating rotor so as not to cause twisted or danger of being wounded or being cut. Engine will heat up. Please DO NOT touch it to avoid being burned or injured.
Copyright ©2023 Ruko All Rights Reserved. 11
F11GIM2 User Manual
Please DO NOT close this product to your ear as it may cause injury to your hearing. Type-C 5V wall charger recommended for charging. DO NOT use any charger stronger than 5V. To comply with the command of the magnetic environment requirement formulated by the Aviation Radio Bureau and the related authority, during the regulated period in certain areas,please stop using the transmitter of this model when such regulation command is issued. Keep your UAS within sight. Never fly over groups of people. Never fly over stadiums or sports events. Understand airspace restrictions and requirements.
Product should only be used by adults and children 14 years and older. Adult supervision required for children under 14 years of age.
12 Copyright ©2023 Ruko All Rights Reserved.
F11GIM2 User Manual
5 Fly Safety
WIFI transmission area requirements: æ Make sure correctly open the remote control antenna. ç Make sure fly in the open area without any interference
and obstacle. è Do not fly against the wind; WIFI transmission distance
is 3KM.
Fly in Open Areas
Strong GPS Signal
Maintain Line of Sight
Maximum flight altitude height is about 120 meters
Avoid flying over or near obstacles, crowds, high voltage power lines, trees, airport or bodies of water. DO NOT fly near strong electromagnetic sources such as power lines and base stations as it may affect the onboard compass.
Copyright ©2023 Ruko All Rights Reserved. 13
F11GIM2 User Manual
7m/s
DO NOT use the drone in adverse weather conditions such as rain, snow, fog and wind speeds exceeding 7 m/s or 16 mph.
Stay away from the rotating propellers and motors.
No Fly Zone
It’s important to understand basic flight guidelines,for the safety of both you and those around you. Don’t forget to read the Safety Guidelines before flight.
14 Copyright ©2023 Ruko All Rights Reserved.
6 Remote Controller
6.1 Controller Features
Camera zoom in and out Shooting
F11GIM2 User Manual
Gimbal dial Recording
Throttle stick
Press once, speed switch; Press and hold for 5 seconds, turn off GPS mode
Press once then press again and hold for 3 seconds to activate Emergency Stop
Antennas, lift up to receive signal
Direction stick
Press once, Return To Home; Press again, cancel Return To Home
Press once check the battery level, press again power on.Press once and then keep pressing power off
Copyright ©2023 Ruko All Rights Reserved. 15
F11GIM2 User Manual
GPS signal strength
Remote Control Battery Long-distance Version
Speed Status Display
Remote Control Signal Strength
Photo/Video
Aircraft Battery
Distance Height D-speed V-speed
The F11 GIM2 has three speed mode: Camera mode 14.76 ft/s, Normal mode 29.53 ft/s, and Sport mode 39.37 ft/s. The default speed is Normal mode, higher speed will consume battery faster.
6.2 Controlling the Drone
Remote Controller Stick Mode-Mode 1 (Default Mode)
Throttle Joystick
Direction Joystick
Left Joystick
Right Joystick
16 Copyright ©2023 Ruko All Rights Reserved.
F11GIM2 User Manual
Switch Remote Controller Stick Mode–Mode 2
Power off the remote control. Keep pressing the , clicking the twice. (Click once indicating the power level, click again the remote control beeps three times and power on, LED screen indicates “RHAND MODE”.) Note: Once restart, the controller will back to default mode – Mode 1.
Direction Joystick
Throttle Joystick
Left Joystick
Right Joystick
Copyright ©2023 Ruko All Rights Reserved. 17
F11GIM2 User Manual
Transmitter (Default Mode)
Aircraft Direction
Remarks
Push up/down the throttle stick to control the aircraft up and down. Push up and the aircraft rises. Pull down the lever and the aircraft lowers. When released, the joystick is in the middle position and the aircraft remains hovering. When the aircraft takes, the throttle lever must be pushed up and the aircraft takes off the ground (please push the stick slowly to prevent the aircraft from suddenly rush up).
Transmitter (Default Mode)
Aircraft Direction
Remarks
Push the throttle stick left/right to control the aircraft heading. Push the stick to the left and the aircraft will rotatecounterclockwise. Push the stick to the right and the aircraft rotates clockwise. In the neutral position, the angular velocity of rotation is zero, and the aircraft does not rotate.
18 Copyright ©2023 Ruko All Rights Reserved.
Transmitter (Default Mode)
F11GIM2 User Manual
Aircraft Direction
Remarks
Push up/down the direction bar to control the aircraft to fly back and forth. Push the stick up and the aircraft leans forward and flies forward. Pull down the lever, the aircraft tilts backwards and flies backwards. The aircraft’s front and rear directions remain level in the neutral position. The joystick offset corresponds to the angle of the aircraft’s front and rear tilt. The greater the offset, the greater the tilt angle and the faster the flight speed.
Copyright ©2023 Ruko All Rights Reserved. 19
F11GIM2 User Manual
Transmitter (Default Mode)
Aircraft Direction
Remarks
Push the direction stick left/right to control the aircraft to fly left and right. Hit the stick to the left, the aircraft tilts to the left and flies to the left. Hit the stick to the right, the aircraft tilts to the right and flies to the right. The left and right directions of the aircraft remain horizontal in the middle position. The joystick offset corresponds to the angle of the aircraft left and right tilt. The greater the offset, the greater the tilt angle and the faster the flight speed.
20 Copyright ©2023 Ruko All Rights Reserved.
F11GIM2 User Manual
6.3 Optimal Transmission Zone
The signal between the drone and the remote controller is most reliable when the antennas are positioned in relation to the aircraft as shown below.
DO NOT use other wireless devices to avoid interference to the remote controller.
6.4 Emergency Stop
About 5 feet
Click once and hold the
for 3 seconds to enter into
Emergency Stop mode. It only activated when the drone’s flight
altitude within 5-42ft.
By using this function the drone motor will stop working immediately thus fall to the ground, which might cause damage. Only use this feature when in emergency so as to reduce the risk of damage or injury.
Copyright ©2023 Ruko All Rights Reserved. 21
F11GIM2 User Manual
6.5 Charging the Controller
Phone Adapter: 5V–3A (Not Included)
USB Adapter (5V/3.0A)
Charging Time: About 2 Hours (Depending on Charging Adapter)
The Remote Control Is Charging Fully Charged With Remote Control
When the remote control is charging, the LED screen will indicate the battery level, when fully charged, it will indicate “BAT 100 PCT” Controller is built-in 3.7V 1500mAh lithium polymer battery. Use the original type-C cable to connect an AC power adapter (5V/3A) to charge. It takes apporximately 2hours to full charge the remote controller. The charing time depends on what adapter are using, suggest to use charger with output currency 5V/3A.Never overcharge.
7 Drone
7.1 Preparing the Aircraft
All aircraft arms are folded before ship out of the factory. Please follow the steps below to unfold the arms. Take off the Gimbal Cover
Unfold the front arms
22 Copyright ©2023 Ruko All Rights Reserved.
F11GIM2 User Manual
Unfold the rear arms and then unfold all the propellers
7.2 Drone Diagram
Intelligent battery
Rotor blades Gimbal and camera
Motor LED indicator
USB-C port
MicroSD card slot
7.3 Assemble the Propeller
Please note that the letter “A” or “B” is printed on each propeller, and make sure all the propellers are attached in the correct motor position.
Copyright ©2023 Ruko All Rights Reserved. 23
F11GIM2 User Manual
7.4 Intelligent Flight Battery
Battery switch
Battery level LED USB charging port
Hold the switch button for 3 sec.power on; then press the button for 3 sec. power off. Refer to the battery level LED, when only one LED left, charge the battery.
DO NOT install the battery with the power already switched on. DO NOT charge the battery immediately after flight as the temperature may be too high.Wait until it cools down to room temperature before charging again.
7.5 Gimbal and Camera
The gimbal of F11GIM2 drone ensure the user can capture clear and stable impage and videos even when the drone is flying, the camera also equipped with electronic stabilization function. The camera uses an upgraded 5GHz Wi-Fi FPV real-time transmission function, equipped with 2-Axis Gimbal 4K EIS, 100 FOV lens and a 80 adjustable camera, which can stably shoot 4K ultra-clear videos and images, providing you with a broad field of vision for unforgettable moments.
24
Copyright ©2023 Ruko All Rights Reserved.
F11GIM2 User Manual
Camera Guideline: æ Please take off the gimbal camera cover before flight. ç When taking off from grass or sand, please place the aircraft on the landing pad or cardboard to keep it level.
On the grass
On the sand
è Do not turn on the aircraft when it is on desk or hollow wooden floor. They will amplify the small vibrations into high-frequency vibrations, which will cause the gimbal cannot work.
On the desk
On the hollow wooden floor
é Do not interfere with the gimbal by putting external forces or picking up the aircraft during calibration. Otherwise, the gimbal will stop to work.
Touching the camera
Picking up the Aircraft (during self-inspection)
Copyright ©2023 Ruko All Rights Reserved. 25
F11GIM2 User Manual
ê The Gimbal cannot work during the compass and Gyro calibration. Put the aircraft on a level surface after calibration, then the gimbal will start to work after 20 seconds.
Before Start
During Compass and Gyro calibration
Put on a level surface and wait for 20 seconds
Precision elements in the gimbal may be damaged in a collision or impact , which may cause the gimbal to function abnormally. Avoid getting dust or sand on the gimbal and the camera, especially in the gimbal motors. DO NOT apply extera force to the gimbal after the gimbal is powered on, as this may cause the gimbal to function abnormaly or even lead to pemanentmotor damage. Make sure to install the gimbal cover when the drone is not in use. If the gimbal get wet after flying in wet weather, temporary failure might occur, make the gimbal and the drone dry so as to get it recover to full function.
26
Copyright ©2023 Ruko All Rights Reserved.
F11GIM2 User Manual
8 Drone Status Indicators
F11GIM2 drone has front and back four LED lights.
Back LED Front LED
Back LED Front LED
LED light indicator
Color Reason
Front and back lights flashing red
Low Power
The controller is not connected to the drone
Action required
Charge the battery Restart and wait for the drone and controller auto-connection
Front and back lights flashing white and pink
The drone turns to Compass Calibration process
Follow the insturction to rotate the drone to complete calibration process
Front and back lights rapid-flashing white and blue
The drone is in
Wait till the drone
Gyroscope Calibration complete calibration
process
automatically (This only
take 2-3 seonds)
Front and back lights flashing white and blue
GPS searching
Waiting for GPS signal
Change to another place and try again
Copyright ©2023 Ruko All Rights Reserved. 27
F11GIM2 User Manual
9 Product Functions Profile
9.1 Return to Home
The Return to Home (RTH) function brings the drone back to the Home Point. This function can only be achieved under GPS mode. There are three types of RTH: Smart RTH, Low Battery RTH, and Fail connection RTH. If the drone have successfully recorded the Take off Point and the GPS signal is strong, the RTH will be triggered when either the Smart RTH is initiated, the drone battery level is low, or when the signal between the drone and remote controller is lost.
Home Point
GPS
Description
The default Home Point is the first location where the drone received a strong or moderately strong GPS signal (3 or more satellite reception).
Smart RTH Smart RTH can bring the drone back to the Home Point. It is initiated by either clicking the button once on the remote controller or on the app, the remote controller will alert with a “DI DI” sound. Click the button again cancel the RTH process.
Fail Connection RTH If the Home Point has been recorded successfully and the compass function can work normally, the Fail Connection RTH function will be triggered once the remote controller signal is lost, the drone will return to the Home point in straight line. The drone may link to the remote controller automatically during the RTH process, if connected successfully, the RTH process will stop.
28 Copyright ©2023 Ruko All Rights Reserved.
F11GIM2 User Manual
Low-Battery RTH Low-Battery RTH is triggered when the drone battery level is low, this function is triggered automatically, drone will first rise to the setted return altitude and fly back to the Home Point, this process is unable to cancel, but it is allowed to control the drone with direction joystick to land it in a safe area. If the battery can’t support the drone fly back to the Home Point, it will land automatically where it is, and the remote controller dirction joystick is available during landing.
Cautions Never turn off the remote controller during RTH process. Set a proper return home altitude on the app before take-off. NO obstacle avoidance function is available with this drone. When flight distance less than 98 ft, the drone flies back at the current altitude instead of setted return altitude, make sure it flies higher than any other objects surrounding. When flight distance further than 98 ft, make sure the drone has enough battery to fly back. The drone can NOT return to Home Point without a strong GPS signal.
Copyright ©2023 Ruko All Rights Reserved. 29
F11GIM2 User Manual
9.2 Waypoint Flight
When the phone mobile data is available, select in the app, load
the map data of the area which intended to fly.
Connect the drone’s WiFi on the phone, view the map by clicking
on the app.
The red circle is the limited flight range for this function, click to set
points within the red circle to execute the wayponint flight function
(16 points the most).
Click
and
to reset the points of flight route.
Click
, confirm to start Waypoint Flight.
Push the Direction Joystick to cancel the Waypoint Flight .
30 Copyright ©2023 Ruko All Rights Reserved.
9.3 Point of Interest
F11GIM2 User Manual
This feature enable the drone to fly around the point in a 360 circle.
Open the app,click “CONTROLS” Click ,click “Point of Interest” Slide to right to set the surround radius Slide to confirm to perform Point of Interest Click “Cancel” to exit Point of Interest
When the electromagnetic interference value is bigger than 150, please land the drone and complete the compass calibration again or change to another place to fly.
This function will only be available when the GPS signal is strong.
Copyright ©2023 Ruko All Rights Reserved. 31
F11GIM2 User Manual
9.4 GPS Follow Me
GPS Follow Me function requires strong GPS signal, once the function been initiated, the drone can follow the smart phone whereever it goes, below are the steps to activate this function:
Connect the drone’s WiFi on the smart phone, access to the app CONTROL interface. Make sure the flight distance is within 10-100meters. Click the on the app. Waiting for app to indicate drone status “Follow Me Ready”, now the drone will move along with the positioning coordinates on the app. Click the on the app interface again to exit the Follow Me mode.
GPS Follow Me function will be affected by the tall structures, trees and the living areas with WIFI signal inteference. GPS Follow-me function is not activated when the GPS signal weak or GPS positioning off on the mobile device.
9.5 Image Recognition Follow Me
Image Rcognition Follow Me function enables the drone to follow the object’s in circle movement to rotate. Connect the drone’s WiFi on the smart phone, access to the app CONTROL interface. Click , tap on the object or person plans to track, tap to confirm the selection, drone rotates following the object’s in circle movement.
Make sure the size of the frame isn’t too large, so as to ensure the recognization is acheiveable.
32 Copyright ©2023 Ruko All Rights Reserved.
9.6 Hand Gesture
Click on the app, count down 3 seconds to 0 with hand motion to take photos and record video. Follow the instruction on the app.
F11GIM2 User Manual
When raise the hand, make sure to keep the elbow at the same height of the shoulder.
10 Connect the APP
10.1 Download the App
QR code of “RUKO DRONE” for Apple IOS system.
QR code of “RUKO DRONE” for Android system.
10.2 Connect the APP with Drone
Once the drone and remote controller connected, access “SETTING” on smart phone, open the “WLAN”, find the drone’s WiFi which name “RUKO-GIM-XXXX”, open the app.
Tips: Android phones requires user to check a “confirm connection”after choose the drone’s WiFi on the phone, please wait around 10-30 seconds until this reminder come up, otherwise the connection will be failed.
Copyright ©2023 Ruko All Rights Reserved. 33
F11GIM2 User Manual
Once the drone WiFi has been connected, the app will recognize the drone model and connect automatically.
CONTROLS: tap to access the instant video transmission and drone control interface. LEARN TO FLY: tap to watch the guide video. GUIDE: tap in to read the manual, and watch instructional videoes.
11 APP Functions
11.1 Control
Wait until the drone status says “Ready to Fly” before initiating flight, access to the control interface.
34 Copyright ©2023 Ruko All Rights Reserved.
F11GIM2 User Manual
11.2 APP Icons Introduction
Back to main menu
GPS signal
Setting
Remote Battery
Aircraft battery
Auto take off GPS return home
SD card status (pls format the SD card
for the 1st time)
Photo/video switching
More functions
Media gallery (one key to share)
Shutter
Altitude(meters)
Sound recording
Distance(meters)
Speed(meters/sec)
Copyright ©2023 Ruko All Rights Reserved. 35
F11GIM2 User Manual
User can refer to the aircraft flight direction from the Attitude Indicator in the app.
Remote controller position Aircraft
orientation
12 APP Setting
12.1 Settings
Flight Setting and Out of Beginner Mode While the drone is under GPS mode, its default mode is Beginner Mode, Which limites the flight range: Maximum Flight Distance is 30 meters; Maximum Flight Altitude is 30 meters; Setted RTH Altitude is 20 meters; Follow below picture to turn off the Beginner Mode and set the proper flight setting in the app.
The drone must be conneted with the app to save the setting.
36 Copyright ©2023 Ruko All Rights Reserved.
F11GIM2 User Manual
Find the Lost Drone
When the drone has connectted with app, and drone GPS signal is
strong, the drone’s locationcan be recorded in the app.
æAccess to “Track”, click the drone.
to open the map surface to search
çThe last position of lost drone will be showed on the map.
Current position of the mobile phone
Copyright ©2023 Ruko All Rights Reserved. 37
F11GIM2 User Manual
Gimbal Back to Factory Setting Get the gimbal back to factory setting, access to “PTZ adjust”, click ” Restore factory setting”
How to change units This function enables to switch the units between Inch(MPH), Meter(m/s), Metric(km/h).
13 APP Functions
13.1 App One Key Share Function
Open the app, click , enter into the file (Pic 1.)
38 Copyright ©2023 Ruko All Rights Reserved.
Pic 1
F11GIM2 User Manual
Click once or press to select the photos which to share, click , choose the media to be shared (Pic 3)
Pic 2
Check all Pic 3
Share
Delete
It is only allow to share 9 pictures or 1 video the maximum at one time.
Copyright ©2023 Ruko All Rights Reserved. 39
F11GIM2 User Manual
13.2 How to Download the Pictures and Videos
After shooting and recording were completed, photo and video save to both the app album and miroSD card, to download the files:
Connect the drone’s WiFi on the phone, access to the app “control”
interface, click
, either choose to download the picture and
video from SD card or app album :
æDownload the picture and video from SD card, click and click save to the mobile album.
,choose files
çDownload the picture and video from app album, choose files and click to save to mobile album.
40 Copyright ©2023 Ruko All Rights Reserved.
F11GIM2 User Manual
Take out the SD card from drone, insert the card into a card reader and read the data on computer, download the video and photo into a computer.
SD Card(sold separately)
Video be stored in the app album will be compressed, thus always suggest to download the video from the SD card to get the best resolution.
Copyright ©2023 Ruko All Rights Reserved. 41
F11GIM2 User Manual
14 Flight
14.1 Takeoff/Landing Procedures
Place the drone in an open, flat area, remove the gimbal cover.
bottom 1
bottom 3
2
Power on the remote controller and the drone. Wait until the remote controller and drone connectted, connect the app, complete the calibration process. Keep the drone camera facing forward, start the motors. Gently push the throttle joystick up to take off. Pull the throttle joysticks down to land the drone. Stop the motors after landing. Power off the drone remote controller, replace the gimbal cover.
14.2 Quick Start
Step 1: Turn on the controller Power on the controller, lift up the antenna to receive signal. Step 2: Turn on the drone Remove the gimbal cover gently, place the drone on a level surface, power on the drone. All lights blinking red. Drone and remote controller connects successfully, all lights flashing white and blue then turn to flashing white and pink.
This connect process take around 40seconds.
42 Copyright ©2023 Ruko All Rights Reserved.
F11GIM2 User Manual
Step 3: Connect the app Open the phone’s WiFi list, connect the drone’s WiFi which names “RUKO-GIM-XXXX”, open the “RUKO DRONE” app.
Stpe 4: Complete compass calibration Pick up the drone and hold it levelly, rotate the drone in one full circle (360°), until hear a “beep” sound reminder. Hold the drone vertically with camera facing to the sky, rotating a full circle (360°), there are two “beep” sound reminder.
Step 5: Complete the gyroscope calibration Put the drone on a level surface, push the left and right joysticks to the 11′ and 1′ o’clock positions, lights flashing white and blue quickly.
Drone searches for GPS signal automatically, when lights turn to solid blue and white, drone is ready to fly. App drone status: “Fly” is displayed in the app, drone is ready to fly.
When it is needed to manually trigger the compass calibration to adapt to the enviroment, please push the joystick to 1 & 11 o’clock position, follow the above steps to rotate the drone.
Copyright ©2023 Ruko All Rights Reserved. 43
F11GIM2 User Manual
Step 6: 3 Ways to land the drone Press the RTH button , drone will return to the Home Point. Press the land button on the app, the drone will land directly. Keep pulling Throttle Joystick down until the drone lands and motors stop.
Always keep the head of drone facing forward
If the drone keep searching for GPS but no success because of weak GPS signal, keep pressing the button to turn off the GPS Mode and switch to Manual Control mode, so that it is able to get the drone take-off. Howerer, under Manual Control mode, there is high risk that the drone will fly away with the wind, as no GPS positioning assisted.
15 Specifications
15.1 Drone
MODEL: F11 GIM2 Weight (Including Battery): 585g/20.6oz Flight Time: About 28 mins Motor Model: 1806 Operating Temperature Range: 32° to 104° F ( 0° to 40° C) Satellite Systems: GPS/GLONASS Dimensions (LxWxH): Unfolded: 45X40.5X8(cm) Folded: 17.6X10.5X8(cm)
15.2 Gimbal Stabilization
Machanical Range: Tilt About -100°TO+70°, Roll About -35°TO+35° Controll Range: Adjusted angle of camera (up and down): About -80° TO+0°
44 Copyright ©2023 Ruko All Rights Reserved.
F11GIM2 User Manual
15.3 Camera
Lens:FOV: 100° Equivalent Focal Length: 60CM Focus range: Fixed-focus Resolution of photo: Phone 3840X2160P
SD card 3840X2160P Resolution of video: Phone 1280X720P
SD card 3840X2160P Photo Format: JEPG Video Format: MP4 Supported File Systems: FAT32 Supported SD Cards: Micro SD card (Class 10/U1 or later) 32G-128G
15.4 5G Transmission
Operating Frequency: 5.15-5.35 GHz; 5.725-5.825 GHz Supported Transmission Protocol: 802.11a; 802.11n20; 802.11n40 Video Transmission Frame Rate: 30FPS
15.5 APP / Live View
Mobile App: RUKO DRONE Live View Quality:
CONFIGURATION 4K
STORAGE METHOD
Phone SD card
Photo Video Photo Video
RESOLUTION
TRANSMISSION FRAME RATE
3840X2160P 1280X720P 3840X2160P 3840X2160P
30fps 30fps
Required Operating System: IOS 9.0 or later/Android 5.0 or later
Copyright ©2023 Ruko All Rights Reserved.
45
F11GIM2 User Manual
15.6 Remote controller
Operating Frequency: 2.4G + 5G bridge Max operating distance: Up to 3KM (Outdoor and Unobstructed) Battery: 1500mAh Li-polymer Charging time: about 2 hours Operating time: about 2.5 hours Operating Voltage: 3.7V Mobile Device Holder: 4.7 “to 6.5” Smart Phones Operating Temperature: 32° to 104° F ( 0° to 40° C )
15.7 Intelligent Flight Battery
Capacity: 2500 mAh Voltage: 11.1V Battery Type: Li-polymer Energy: 27.75Wh Net Weight: 195 g / 6.8 oz Max Charging Power: 15W Max Charging Time: About 4.5 hours (Depending on Charging Power) Charging Temperature Range: 32° to 104° F ( 0° to 40° C )
15.8 Charging cable: Type-C
Compatible Charger (not included): Output currency 5V/3A Rated Power: 15 W
46
Copyright ©2023 Ruko All Rights Reserved.
Common Problems and Solutions
Question The motors cannot be started
Unstable flight
Reason
Solutions
Weak GPS signal
Turn on the Aircraft in an open area with strong GPS signal
The Aircraft has low The red light stays on battery. Please
charge the battery in time
The pink light stays on The left and right joystick are not in place
The compass is not calibrated. Please refer to the “Calibration Before Flight” section of the user manual Push the left and right joysticks simultaneously to 5 o’clock and 7 o’clock for 2 seconds
Flying too low, affected by Aircraft airflow
Please fly the Aircraft above 9.84ft(3 meters)
The gyroscope is not calibrated
Place the Aircraft on a horizontal surface and conduct gyroscope/horizontal calibration. Please refer to the “Calibration Before Flight” section of the user manual
The propellers become deformed and incomplete
Replace the propellers with new ones
GPS signal is
Please fly the Aircraft in an
unstable. Flying near open area free of obstacles
buildings and in
within the circle of radius
obstructed places 32.81 ft(10 meters)
Copyright ©2023 Ruko All Rights Reserved.
47
Question
Reason
Solutions
The Transmitter signal is interfered or the Aircraft exceeds the range of remote control
Please fly the Aircraft outdoors without interference, and ensure that it is within a controllable range
Out of control,
spinning around on its own, abnormal sound
Compass interference
Please manually land the drone in time and calibrate the compass. Please make sure to fly away from the
buildings, trees, power lines,
and signal towers
The propellers become deformed and incomplete
Replace the propellers with new ones
The drone was placed Place the drone on landing
on an unlevel surface pad or cardboard horizontally,
such as grass and and ensure a gap between
sand and so on
the camera and the surface
The camera is tilted/Gimbal is not working/ Can’t adjust the camera angle
The drone was placed
on the surface which
transfer samll
Place the drone on a solid
vibration, such as level ground
hollow wooden floor,
desk and so on
Keep touching the camera and gimbal or holding the drone before all set
Never touch the camera when the power is on, place the drone on a level ground until the gimbal complete self-check
The compass is in calibrating
After complete the compass calibration, place the drone on a level ground
48
Copyright ©2023 Ruko All Rights Reserved.
Question
Reason
Solutions
The Aircraft is out of Fly the Aircraft within the
Wi-Fi range
range of the Wi-Fi
WiFi image transmission signal interference
Fly the Aircraft in an unobstructed open area free of buildings, high-voltage wires and signal towers
Video freezes, image transmission distance is short
The transmitter and the mobile phone are not pointed at the direction of the drone
Point the Transmitter and the mobile device at the flying direction of the Aircraft to maintain the strongest signal connection
Phone performance freezes
Close unused apps running in the background to maintain the best performance of the phone
Video is not clear
If use APP storage, the pixels are 1920×720P
Insert the memory card and storage the video on the memory card
The phone is not connected to the drone’s Wi-Fi
Connect the drone’s Wi-Fi : Ruko-GIM-****** on the phone
App does not show what the drone’s camera is taking
The phone operating system version is too low
The required device operating system to work with the app is Android 6.0 and above, IOS 10.02 and above
Certain phones’ setting preventing the app working normally
Set the phone to airplane mode
The VPN app block the connection of the Turn off the VPN phone and the drone
Didn’t keep the drone’s network when trying to connect the drone’s WiFi
Please do keep the drone’s WiFi connectted when the phone pop up reminder that “This network has no internet access”
Copyright ©2023 Ruko All Rights Reserved.
49
Question APP crashes or functions abnormally
Reason Wrong app downloaded A few mobile phone versions are old and incompatible with APP
Solutions Download the correct App Provide mobile phone version and model, we will adapt and solve it
It will take longer
Phone cannot connect to the drone’s Wi-Fi
time for certain phone to connect with the drone’s Wi-Fi
Try several times or restart the phone
for the first time
The drone’s WiFi name is not displayed in the list
WiFi has not been activated
The WiFi will be available when the drone and the transmitter connected, which take around 40 seconds
GPS signal is weak
GPS signals cannot be found
Turning on the drone indoors. Please search for
indoors
GPS signals in an open place
outdoors
Under the tree, next to the building, in an obstructed place
Please stay away from obstacles for more than 32.81 feet(10 meters), and search for GPS signals in an open area
Unable to return home, drifting and flying away
GPS signal was turned off during the flight
Please don’t turn off GPS suddenly during outdoor flight. Switch back to GPS mode in time
Cannot charge battery/Cannot fully charge battery
Using inferior charger or charging on the computer with unstable voltage output
Use a mobile USB charger that ensures constant stable voltage output(5V) and amperage output(2-3A)
Using inferior charging cables
Please use the original factory charging cable to charge
50
Copyright ©2023 Ruko All Rights Reserved.
Question Short battery life
Reason Flying in windy weather
Flying in cold weather
Solutions Flying in windy weather will accelerate power loss In low temperatures, the chemical reaction of the lithium battery is slowed down and the energy cannot be fully released
The battery is not fully charged
Fully charged with the correct USB charger before flying
In order to give you the best
experience, we tested
functions of all Aircraft
The product has slight We tested all Aircraft before shipping. Therefore, it
marks
before shipping
is inevitable that there will be
slight traces. However, it can
be guaranteed that all
Aircraft are 100% brand new
Copyright ©2023 Ruko All Rights Reserved.
51
17 Accessories Support
F11GIM2 User Manual
Battery
Propeller
Landing Gear
Arm
Transmitter
All of the above accessories can be searched and purchased on Amazon, and you can enter the Ruko store to buy them yourself. Be sure to use original accessories. The use of non-original accessories may cause danger to the safe use of the aircraft.
CONTACT US FOR MORE TECH SUPPORT
Printed in China.
52
Copyright ©2023 Ruko All Rights Reserved.
Ruko Tech Support
https://rukotoy.com/support-drones
This User Manual is subject to change without notice. You can check the recently updated version of “User Manual” on Ruko’s official website https://rukotoy.com/support-drones If you have any questions or suggestions about the User Manual, please contact us via the following email: rukobrandstore@gmail.com Ruko is a trademark of Shenzhen Ruike Innovation Technology Co.,Ltd Copyright 2023 Ruko All Rights Reserved.
CONTACT US FOR MORE TECH SUPPORT +1 888
892-0155 Mon-Fri 7:00AM – 7:00PM (PST)
+86 19129317359
rukobrandstore@gmail.com
Documents / Resources
![]() | Ruko F11GIM2 Drone 4K Camera [pdf] User Manual F11GIM2 Drone 4K Camera, F11GIM2, Drone 4K Camera, 4K Camera, Camera |