Novopal Чистая синусоида 2000 Вт автомобильный инвертор преобразователь постоянного тока 12 В в 120 В переменного тока инструкции

Pure Sine Wave 2000 Watt Car Power Inverter Converter DC 12V to 120V AC

How to Ground an Inverter ?
Заземление
The power inverter has a terminal on the back panel marked “Grounding” or ” “. This is used to connect the chassis of the power inverter to the ground. The ground terminal has already connected to the ground wire of AC output receptacle through the internal connecting wire. The ground terminal must be connected to the ground wire, which will vary depending on where the power inverter is installed. 1 In some fixed Connect the ground terminal to the earth available position

A.Connect to household metal water pipes, metal frames (door

frames, window frames) connected to the earth

B.Connect to the nails on the wall or ground which contact to

2Indoor conditions the earth

C.Connect to the grounding system of the mains grid which is

connected to the ground wire of the socket (Note: this

3Outdoor conditions
4In a Vehicle,boat or ship

connection must be operated by a professional electrician)
Connect one end of earth wire to the inverter grounding terminal,the other end to the nail and insert to the earth. Connect to the chassis of vehicle or grounding system of boatship.

Внимание!
To make sure the firmness of the connection. The ground wire must be 14AWG ( 2.08mm2 ) or even larger Do not operate the power inverter without connecting to ground. Electric shock hazard may result.

Документы / Ресурсы

novopal Pure Sine Wave 2000 Watt Car Power Inverter Converter DC 12V to 120V AC [pdf] Инструкции
Pure Sine Wave 2000 Watt Car Power Inverter Converter DC 12V to 120V AC

Оставить комментарий

Ваш электронный адрес не будет опубликован.