ZB-GW03 ZigBee Smart Hub
User Manual V1.0
Getting Started
1. Download APP
Download the eWeLink app from the App Store or Google Play.
2. Power On
Power on the Hub. Plug in the Ethernet cable. Wait for the red LED to flash quickly.
3. Add Hub to App (Ethernet - Recommended)
Open the eWeLink app. Tap the '+' icon to add a device. Select 'All devices', then 'Hubs', and choose 'ZigBee Hub (Ethernet)'. Follow the on-screen prompts. Once the app scans for devices, tap the device named 'eWeLink_******' to add it.
4. Add ZigBee Sub-device
On the app's main screen, tap your 'ZigBee Hub' device. Tap the '+' icon to add a sub-device. The Hub's red LED will stay on, and the green LED will flash quickly. Reset your ZigBee sub-device to enter pairing mode. The app will detect the device within seconds.
Pairing Modes
Quick Pairing Mode
Long press the pairing button until the green LED is solid and the red LED flashes quickly. In the eWeLink app, tap '+' and select 'Quick Pairing'. Follow the app's instructions.
Compatible Pairing Mode (AP Mode)
Long press the pairing button until the green LED is solid and the red LED flashes quickly. Release the button. Press and hold the pairing button again for 5 seconds until the green LED is solid and the red LED flashes slowly. The Hub is now in AP mode. In the app, tap '+' and select 'Compatible Mode' at the bottom.
For Android: Enter your Wi-Fi password and tap 'Next'.
For iOS: Connect your mobile device to the Wi-Fi network named 'ITEAD-******' with the password '12345678', then return to the app and tap 'Next'. Wait for pairing to complete.
Factory Reset
Press and hold the pairing button for approximately 15 seconds. The red and green LEDs will flash simultaneously. Continue holding until both LEDs are solid. Release the button. Wait for the red LED to flash, and the green LED to turn off. The Hub has successfully reset to factory settings.
Product Information
Product Features
This device is a ZigBee multi-functional gateway that connects to your network via Wi-Fi, transforming it into a ZigBee hub. It allows you to control various ZigBee devices, enabling remote on/off control, scheduling, and sharing with family members for simultaneous control.
Specifications
| Feature | Details |
|---|---|
| ZigBee | IEEE 802.15.4 |
| Wi-Fi | IEEE 802.11 b/g/n 2.4GHz |
| Ethernet | 10/100M |
| Input | DC 5V/1A |
| Working Temperature | -10~60°C |
| Material | PC |
| Operating Systems | Android & iOS |
| Dimension | 76x76x23mm |
LED Indicator Status
| Mode | Red LED | Green LED |
|---|---|---|
| Normal Mode | Solid On | Solid On |
| No Network Connection | Flashes Slowly | Off |
| Upgrade | Solid On | Flashes Slowly |
| Ethernet Pair Mode | Flashes Quickly | Off |
| AP Pair Mode | Flashes Slowly | Solid On |
| Quick Pair Mode | Flashes Quickly | Solid On |
| Add Sub-device | Solid On | Flashes Quickly |
Physical Components
The hub features a pairing button, a signal indicator (red LED), a signal indicator (green LED), an Ethernet port, and an input power port.
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.