HP Color LaserJet Pro MFP M477 Setup Guide

Product Specifications

This guide provides essential setup information for the HP Color LaserJet Pro MFP M477 series.

• Voltage Compatibility: 110-127 Vac or 220-240 Vac
• Frequency: 50/60 Hz
• Operating Temperature: 15°C to 30°C (59°F to 86°F)
• Approximate Weight: 21.8 kg (48.06 lb) for M477fdn/M477fnw; 23.2 kg (51.15 lb) for M477fdw.
• Approximate Dimensions: 415.4 mm (16.35 in) height, 656 mm (25.83 in) depth, 1025 mm (40.35 in) width.

For full details and support, visit www.hp.com/support/colorljM477MFP.

Initial Setup Steps

1. Step 1: Connect Power

   Connect the power cord securely between the printer and a grounded AC wall outlet. Verify that the power source voltage (110-127V or 220-240V, 50/60Hz) matches the rating specified on the printer's label. ⚠️ CAUTION: Use only the power cord supplied with the printer to prevent product damage.

2. Step 2: Optional USB Storage Setup

   Optional: To enable job-storage printing, insert a USB thumb drive into the rear USB port. The drive must meet the following requirements: USB 2.0 or later, with a minimum storage capacity of 16 GB. NOTE: Do not connect the printer's USB cable at this stage.

3. Step 3: Power On the Printer

   Turn on the printer's power switch. ⚡

Diagram Descriptions

The setup poster includes visual aids:

• An image displays the HP Color LaserJet Pro MFP M477 printer.
• A series of diagrams guides the user through unpacking the printer, removing protective materials, and placing it in its operational location.
• Diagrams illustrate the correct connection of the power cord to the printer and a wall outlet, followed by the action of powering on the device.