FNIRSI GC-01

FNIRSI GC-01 Детектор ядерного излучения Руководство пользователя

Модель: GC-01

1. Введение

The FNIRSI GC-01 is a portable nuclear radiation detector designed for monitoring Beta, Gamma, and X-ray radiation. This device features a built-in GM sensor for accurate detection and offers multiple dosage units, smart alarm functions, and a clear LCD display. This manual provides essential information for the safe and effective operation of your GC-01 detector.

2. Продукт закончилсяview

The FNIRSI GC-01 is equipped with a high-sensitivity Geiger-Müller (GM) tube, capable of detecting various types of ionizing radiation. Its compact design and rechargeable battery make it suitable for a wide range of applications, from personal safety monitoring to environmental surveys.

Детектор ядерного излучения ФНИРСИ ГК-01

Image: The FNIRSI GC-01 Nuclear Radiation Detector, highlighting its key features.

Основные характеристики:

  • Radiation Detection: Обнаруживает гамма-, бета- и рентгеновские лучи.
  • Диапазон измерения: Cumulative dose equivalent from 0.00 μSv to 500.0 mSv.
  • Энергетический диапазон: 48 KeV - 1.5 MeV ≤ ±30% (for 137 Csγ).
  • Интеллектуальная система сигнализации: Features light, vibration, and sound alerts. Customizable alarm thresholds for current and cumulative dose.
  • Отображать: LCD screen for real-time monitoring and waveform display.
  • Несколько единиц: Supports μSv/h, μGy/h, mR/h, CPS, and CPM.
  • Аккумуляторная батарея: Built-in 1100mAh Lithium Polymer battery with Type-C charging port.
  • Параметры языка: английский и китайский.

3. Содержимое упаковки

После распаковки, пожалуйста, убедитесь, что все перечисленные ниже предметы имеются в наличии и находятся в хорошем состоянии:

Комплектация FNIRSI GC-01

Image: The FNIRSI GC-01 device, user manual, and charging cable.

  • Детектор ядерного излучения ФНИРСИ ГК-01
  • Руководство пользователя
  • Зарядный кабель USB Type-C
  • Упаковочная коробка

4. Настройка и первоначальное использование

4.1 Зарядка устройства

Before first use, fully charge the FNIRSI GC-01 using the provided USB Type-C cable and a standard USB power adapter (not included). The charging port is located on the side of the device.

FNIRSI GC-01 Type-C Charging Port

Image: Close-up of the FNIRSI GC-01 showing the Type-C charging port.

4.2 Включение/выключение питания

Для включения устройства нажмите и удерживайте кнопку питания (обычно обозначенную символом питания), пока не загорится экран. Для выключения устройства нажмите и удерживайте кнопку питания еще раз, пока устройство не выключится.

5. Инструкция по эксплуатации

The GC-01 features an intuitive interface for monitoring radiation levels. Use the navigation buttons (up, down, left, right, OK) to interact with the device.

FNIRSI GC-01 Monitoring Interface

Image: The main monitoring interface of the FNIRSI GC-01, displaying current, average, maximum, and cumulative radiation values.

5.1 Интерфейс мониторинга

The main screen displays real-time radiation data, including:

  • Текущая доза облучения: Instantaneous radiation level (e.g., μSv/h).
  • Средняя доза облучения: Average radiation level over a period.
  • Максимальная доза облучения: Highest radiation level detected.
  • Кумулятивная доза: Total accumulated radiation dose since the last reset.
  • Мониторинг волновой формы: A graphical representation of radiation levels over time can be accessed from the main interface.
Регулируемый интерфейс FNIRSI GC-01

Image: Screenshots showing the Monitoring Interface, Waveform Monitoring, Unit Setting, and Alarm Settings menus.

5.2 Настройки устройства

Чтобы изменить единицу измерения:

  1. На главном экране нажмите кнопку Настройки кнопка (значок шестеренки).
  2. Перейти к Единицы using the up/down buttons and press OK.
  3. Select your desired unit (μSv/h, μGy/h, mR/h, CPS, CPM) and confirm with OK.

5.3 Настройки будильника

The device can be configured to alert you when radiation levels exceed predefined thresholds.

  1. На главном экране нажмите кнопку Настройки кнопка.
  2. Перейти к Сигнализации и нажмите OK.
  3. You can set thresholds for Текущая тревога и Cumulative Alarm. Adjust values using the navigation buttons.
  4. В Ala Mode menu, select your preferred alarm modes: Свет, Вибрировать, и/или Звук.
FNIRSI GC-01 Three Alarm Modes

Image: The FNIRSI GC-01 displaying the three alarm modes: Sound, Glitter (Light), and Vibrate.

5.4 System Clock and Display Settings

You can adjust the system date and time, and customize display settings such as brightness or language.

  1. Доступ к Настройки меню.
  2. Выбирать Sys Clock для установки даты и времени.
  3. Выбирать Set disp to adjust display options, including language (English/Chinese).
FNIRSI GC-01 System Clock, Alarm Mode, and Display Settings

Image: Screenshots showing the System Clock, Alarm Mode, and Display Settings menus.

6. Техническое обслуживание

6.1 Очистка

Протрите устройство мягкой сухой тканью. Не используйте абразивные чистящие средства или растворители, так как они могут повредить устройство.asinг или экран.

6.2 Уход за аккумулятором

To prolong battery life, avoid fully discharging the device frequently. Recharge the battery when the low battery indicator appears. If storing the device for an extended period, charge it to approximately 50% every few months.

6.3 Хранение

Храните устройство в прохладном, сухом месте, вдали от прямых солнечных лучей и экстремальных температур. Берегите его от воздействия сильных магнитных полей.

7. Поиск Неисправностей

ПроблемаВозможная причинаРешение
Устройство не включается.Низкий заряд батареи или неисправность устройства.Заряжайте устройство не менее 30 минут. Если оно по-прежнему не включается, обратитесь в службу поддержки.
Неточные показания.Interference from other electronic devices or incorrect unit settings.Move away from potential sources of electromagnetic interference. Verify the correct measurement unit is selected in settings.
Сигнализация не срабатывает/не вибрирует.Alarm thresholds not set or alarm mode disabled.Check alarm settings and ensure desired alarm modes (sound, vibrate, light) are enabled.
Экран пустой или завис.Сбой в программном обеспечении.Press and hold the power button for 10-15 seconds to force a restart. If the issue persists, contact support.

8. Технические характеристики

FNIRSI GC-01 Specifications and Features

Изображение: Оверview of the FNIRSI GC-01's display, alarm modes, charging, and portability.

ПараметрЦенить
Типы лучей обнаружениягамма-лучи, рентгеновские лучи, бета-лучи
ДетекторТрубка Гейгера с компенсацией энергии (GM Tube)
Эквивалентная доза0.00-10000 мкЗв/ч (10 мЗв/ч)
Суммарный эквивалент дозы0.00мкЗв-500.0мЗв
Диапазон энергий48 кэВ-1.5 МэВ ±30% (для 137Cs-)
ЯзыкКитайский, английский переключатель
Чувствительность80CPM/μSv (For Co-60)
Единица дозировкинсв/ч, пГр/ч, мР/ч, циклы в секунду, циклы в минуту. Переключатель
Источник питанияЛитиевая батарея емкостью 1100 мАч
Метод сигнализацииСвет, вибрация, звук
Размеры120 х 78 х 27 мм
Вес товара8.1 унций (0.23 килограмма)

9 Важная информация по безопасности

Always operate the device according to the instructions provided in this manual. Do not attempt to modify or repair the device yourself. Keep the device away from water and extreme temperatures. This device is intended for general radiation monitoring and should not be used as a substitute for professional radiation safety equipment in critical environments without proper calibration and certification.

10. Видеоролик о продукте

Watch this official product video for a visual guide on the FNIRSI GC-01 Nuclear Radiation Detector.

Видео: Оверview of the FNIRSI GC-01 Nuclear Radiation Detector, demonstrating its features and operation.

11. Гарантия и поддержка

For warranty information and technical support, please refer to the contact details provided with your purchase or visit the official FNIRSI webСохраните чек в качестве подтверждения покупки.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.