Linky 87 Wireless Mechanical Keyboard User Manual

Введение

Welcome to the user manual for your ELECFOX Linky 87 Tri-Mode Wireless Mechanical Keyboard. This premium TKL keyboard is designed for both gaming and productivity, offering versatile connectivity options, customizable RGB lighting, and a hot-swappable design for personalized typing experiences. This manual provides detailed instructions on setting up, operating, maintaining, and troubleshooting your keyboard to ensure optimal performance.

Что в коробке?

• Linky 87 Wireless Mechanical Keyboard
• Съемник Keycap
• USB-кабель (USB-C)
• Руководство на английском языке
• Extra 2 Baby Panda Pre-lubed Linear Switches
• 2.4GHz Wireless Dongle (typically stored in the keyboard or packaging)

Продукт болееview

Figure 1: Linky 87 Keyboard Layout. This image displays the full 87-key tenkeyless layout of the keyboard. Keycaps are primarily off-white with some green accent keys like Esc, Enter, and arrow keys. The layout includes standard alphanumeric keys, function row (F1-F12), navigation cluster (Print, Scroll, Pause, Insert, Home, PgUp, Delete, End, PgDn), and arrow keys. The bottom row features Ctrl, Win, Alt, Fn, and Super keys. A light bar is visible on the top right, indicating status.

The Linky 87 features an 87-key Tenkeyless (TKL) layout, providing a compact design while retaining essential keys. Key functions are standard QWERTY layout with a dedicated function row (F1-F12), navigation keys (Print, Scroll, Pause, Insert, Home, PgUp, Delete, End, PgDn), and arrow keys. The keyboard also includes a dedicated 'Fn' key for accessing secondary functions and multimedia controls.

Настраивать

1. Первоначальная зарядка

Before first use, it is recommended to fully charge the keyboard. Connect the supplied USB-C cable to the keyboard's USB-C port and the other end to a powered USB port on your computer or a USB wall adapter. The keyboard has a built-in 4000mAh rechargeable battery.

2. Подключение клавиатуры

The Linky 87 supports three connection modes: USB-C wired, 2.4GHz wireless, and Bluetooth 5.0.

Проводной режим USB-C

1. Ensure the mode switch on the keyboard (usually on the back or side) is set to 'Wired' or 'USB'.
2. Подключите кабель USB-C от клавиатуры к USB-порту компьютера.
3. Клавиатура будет автоматически распознана вашей системой.

Беспроводной режим 2.4 ГГц

1. Locate the 2.4GHz USB dongle (often stored in a compartment on the keyboard).
2. Подключите ключ к свободному USB-порту вашего компьютера.
3. Установите переключатель режимов на клавиатуре в положение «2.4G» или «Беспроводная связь».
4. Клавиатура должна автоматически подключиться к ключу.

Режим Bluetooth 5.0

1. Переведите переключатель режимов на клавиатуре в положение «BT» или «Bluetooth».
2. Чтобы войти в режим сопряжения, нажмите и удерживайте Fn + 1, Fn + 2, Fn + 3, Fn + 4, или Fn + 5 for 3-5 seconds until the indicator light flashes rapidly. Each number corresponds to a different Bluetooth profile, allowing connection to up to five devices.
3. On your device (PC, Mac, Tablet, Smartphone), open Bluetooth settings and search for new devices.
4. Select "Linky 87" from the list of available devices to pair.
5. После сопряжения индикатор перестанет мигать и будет гореть постоянно.
6. Для переключения между сопряженными устройствами Bluetooth просто нажмите Fn + 1/2/3/4/5 (короткое нажатие).

Инструкция по эксплуатации

RGB Backlighting and Customization

The Linky 87 features vibrant per-key RGB, side RGB lighting, and a logo light, offering up to 40 backlight modes and 16.8 million colors.

• Встроенные элементы управления: Использовать Fn + [клавиша] combinations to cycle through lighting effects, adjust brightness, and change colors. (Specific key combinations for lighting control are typically found in the quick start guide or on the keyboard itself).
• VIA Software Customization: For advanced customization, including remapping keys, setting up macros, and fine-tuning lighting effects, use the VIA configurator. This software is browser-based, meaning no additional software installation is needed. Visit the official ELECFOX website or search for "VIA keyboard configurator" to access it.

Коммутаторы с возможностью горячей замены

The Linky 87's hot-swappable PCB allows you to change mechanical switches without soldering. It supports both 3-pin and 5-pin switches.

1. Удаление переключателей: Use the included switch puller to gently grip the switch from the top and bottom, then pull straight up. Avoid wiggling to prevent damage to the PCB socket.
2. Установка переключателей: Align the pins of the new switch with the holes on the PCB. Gently press the switch down until it clicks into place. Ensure the pins are straight before inserting to avoid bending them.

N-клавишное нажатие (NKRO)

The Linky 87 supports N-key rollover, ensuring that every keypress is registered accurately, even when multiple keys are pressed simultaneously. This is particularly beneficial for fast-paced gaming and typing.

Обслуживание

Чистка клавиатуры

• Колпачки клавиш: Use the included keycap puller to remove keycaps. Clean them with a mild soap and water solution, then rinse thoroughly and air dry completely before reattaching.
• Корпус клавиатуры: Используйте мягкую, безворсовую ткань, слегкаampened with water or a mild cleaning solution to wipe down the keyboard case. Avoid excessive moisture.
• Между клавишами: Для удаления пыли и мусора между переключателями используйте сжатый воздух. Также можно использовать небольшую щетку.

Уход за аккумулятором

• Избегайте частой полной разрядки аккумулятора.
• Если вы не используете клавиатуру в течение длительного времени, храните ее в прохладном, сухом месте.
• Use the provided USB-C cable for charging to ensure compatibility.

Поиск неисправностей

Технические характеристики

Гарантия и поддержка

For warranty information and technical support, please refer to the official ELECFOX webили обратитесь в службу поддержки напрямую. Сохраните чек о покупке для предъявления гарантийных претензий.