GROWNEER AX254301 Bathroom Exhaust Fan with Heater and Adjustable Light Manual

1. Введение

The GROWNEER AX254301 Bathroom Fan with Light Combo is designed to provide efficient ventilation, rapid heating, and customizable lighting for your bathroom. This unit features a powerful 150 CFM fan, a 550W infrared heater, and a 1000lm LED light with three adjustable color temperatures (3000K/4000K/5000K). Its quiet operation ensures a comfortable environment while effectively managing humidity and temperature.

• Эффективный поток воздуха: 150 CFM fan suitable for rooms up to 80 square feet.
• Быстрый нагрев: Two 550W infrared heating bulbs with overheat protection.
• Регулируемое освещение: 1000lm LED light with selectable 3000K, 4000K, or 5000K color temperature.
• Тихая работа: Operates at a low 1.5 Sone noise level.

2 Важная информация по безопасности

Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.

• Always disconnect power at the circuit breaker before installing or servicing the unit.
• Все электромонтажные работы должны выполняться квалифицированным электриком в соответствии со всеми применимыми электротехническими нормами и стандартами.
• Убедитесь, что устройство правильно заземлено.
• Do not install this unit in a ceiling with less than 2x6 construction.
• Do not use this fan in cooking areas.
• The heater function has built-in overheat protection; it will automatically stop if temperatures become too high.

3. Что в коробке

Перед установкой убедитесь, что все компоненты присутствуют и не повреждены.

Figure 3.1: Package contents including the fan unit, mounting bracket, duct connector, clamps, gloves, and instruction manual.

• Bathroom Fan Unit with Heater and Light
• Монтажный кронштейн
• Duct Connector (4.5-inch compatible)
• Шланг Clampс (2)
• Защитные перчатки
• Вырезанный шаблон
• Руководство по эксплуатации

4. Технические характеристики

5. Настройка и установка

Прежде чем начать: Ensure power is disconnected at the circuit breaker. Wear protective gloves provided.

5.1 Подготовка устройства

1. Remove Duct Connector and Wire Cover: Locate the duct connector and wire cover on the fan housing. Unscrew and remove them to access the internal wiring.
2. Доступ к проводке: The heating element, exhaust fan, and light have separate wiring connections. Familiarize yourself with the wiring diagram in the manual.

5.2 Mounting the Housing

3. Подготовьте проем в потолке: Use the provided cut-out template to mark and cut the ceiling opening (17.13" x 11.02"). Ensure the opening is clear of obstructions and suitable for 2x6 ceiling construction.
4. Установите монтажный кронштейн: Secure the mounting bracket to the ceiling joists using appropriate screws. The bracket is designed for secure installation.
5. Place Fan Housing: Carefully insert the fan housing into the ceiling opening, ensuring it aligns with the mounting bracket.
6. Безопасное жилье: Adjust the tabs on the fan housing to a vertical position and align them with the slots on the telescopic bracket. Bend the tabs to the side to firmly secure the housing.

5.3 Электрические соединения

7. Подключите провода: Connect the house wiring to the fan's wiring. The black wire is for the exhaust fan, the blue wire is for the light (white receptacle), and the red wire is for the heater. Ensure all connections are secure and follow local electrical codes.
8. Reattach Wire Cover: Once wiring is complete, reattach the wire cover with the short screw.

5.4 Воздуховоды

9. Connect Ventilation Duct: Attach a 4.5-inch ventilation duct (not included) to the duct connector on the fan housing. Secure it with the provided hose clamps and HVAC tape to ensure an airtight seal.
10. Route Duct: Route the ventilation duct to an appropriate exterior vent. An insulated duct is recommended to prevent condensation.

5.5 Окончательная сборка

11. Подключите светодиодные провода: Connect the LED and Bluetooth wires from the panel to the corresponding plugs in the fan housing.
12. Install Light Panel: Squeeze both sides of the panel spring and insert it into the spring rails in the fan housing. Push the panel up until it sits flush with the ceiling.

6. Инструкция по эксплуатации

The GROWNEER AX254301 offers independent control over its fan, heater, and light functions, allowing for customized comfort.

6.1 Работа вентилятора

• The 150 CFM fan can be operated independently to provide efficient ventilation for rooms up to 80 square feet.
• It operates at a quiet 1.5 Sone, ensuring minimal disturbance.

Figure 6.1: Illustration of the 150 CFM powerful airflow, ideal for rooms up to 80 sq. ft.

Figure 6.2: Visual representation of the 1.5 Sone ultra-quiet operation, showing noise levels compared to typical bathroom fans.

6.2 Работа нагревателя

• The two infrared heating bulbs deliver a total of 550W, providing rapid heat.
• The heater function can be activated independently for quick warmth in cold mornings.
• Built-in overheat protection automatically stops the heater if temperatures become too high.

Figure 6.3: Diagram illustrating the 550W powerful heater instantly warming the bathroom, with a temperature rise graph.

6.3 Легкая эксплуатация

• The 1000lm LED light offers three adjustable color temperatures: 3000K (warm white), 4000K (neutral white), and 5000K (cool white).
• To adjust the color temperature, select the desired setting behind the light bulb.

Figure 6.4: Visual guide to selecting the 3 color temperatures (3000K, 4000K, 5000K) by adjusting a switch behind the light bulb.

7. Техническое обслуживание

Regular maintenance ensures optimal performance and longevity of your GROWNEER bathroom fan.

• Очистка решетки: Периодически протирайте наружную решетку мягкой тряпкой.amp Ткань. Не используйте абразивные чистящие средства.
• Очистка лопастей вентилятора: Disconnect power before attempting to clean fan blades. Remove the light panel and carefully clean any dust or debris from the fan blades.
• Замена лампы: Ensure power is off before replacing heating bulbs. Use only bulbs of the correct wattage and type as specified in the manual.

8. Поиск Неисправностей

Если у вас возникли проблемы с вентилятором, ознакомьтесь со следующими распространенными проблемами и решениями:

9. Гарантия и поддержка

For warranty information or technical support, please contact GROWNEER customer service. Refer to your purchase documentation for specific warranty terms.

Контакт: Please refer to the contact information provided in your product packaging or on the official GROWNEER webсайт.