Hot Wheels City Shark Chomp Beach Playset Instruction Manual

Введение

Welcome to the Hot Wheels City Shark Chomp Beach Playset! This manual provides comprehensive instructions for assembling, operating, and maintaining your new playset. Prepare for exciting car-launching action as you navigate the shark-infested waters of Hot Wheels City.

Информация по безопасности

• ВНИМАНИЕ: ОПАСНОСТЬ УДУШЬЯ – Мелкие детали. Не для детей младше 3 лет.
• Сборка взрослыми обязательна.
• Всегда присматривайте за детьми во время игры.
• Не допускайте попадания волос и свободной одежды в движущиеся части.
• Не вносите никаких изменений в игровой набор или его компоненты.

Что включено

Your Hot Wheels City Shark Chomp Beach Playset includes the following components:

• 1 Hot Wheels City Shark Chomp Beach Playset
• 1 Hot Wheels die-cast car (1:64 scale)

Additional tracks and cars are sold separately and can be connected to expand your Hot Wheels City.

Image: All components of the Hot Wheels City Shark Chomp Beach Playset, including the shark structure, track pieces, launcher, and one die-cast car.

Инструкция по сборке

Assembly of the playset typically takes approximately 15 minutes. Follow these steps carefully:

1. Unpack all components from the box. Refer to the packaging image for a visual guide.
2. Connect the main track pieces to form the base of the playset. Ensure all connections are secure.
3. Attach the shark structure to the designated central track section. The shark's mouth should be open, ready for action.
4. Install the pivoting launcher mechanism at the start of the track.
5. Verify all track connections are firm to prevent cars from derailing during play.

Image: The Hot Wheels City Shark Chomp Beach Playset in its retail packaging, showing the assembled playset and included car.

Инструкция по эксплуатации

The playset offers two primary ways to play:

1. Knock Out the Shark

1. Place a Hot Wheels car into the launcher.
2. Adjust the pivoting launcher to aim directly at the shark's mouth.
3. Launch the car with sufficient force to send it through the shark's mouth and complete the figure-8 stunt.
4. A successful launch will cause the shark to be 'knocked out' (its head will fall back).
5. If the car is launched too softly, the shark will 'chomp down' and capture the car.
6. To reset, pull the shark's head back up or open its mouth to retrieve the car and prepare for the next launch.

Image: A Hot Wheels car being launched directly into the open jaws of the shark playset.

Image: A Hot Wheels car successfully completing the stunt, causing the shark's head to fall back.

Image: A Hot Wheels car failing the stunt and being caught inside the shark's closed mouth.

2. Avoid the Shark

1. Place a Hot Wheels car into the launcher.
2. Adjust the pivoting launcher to aim over the gap jump, bypassing the shark entirely.
3. Launch the car with enough speed to clear the gap and continue on the track.

Image: Close-up of the Hot Wheels Speed Snap Track System, demonstrating how track pieces connect.

Обслуживание

To ensure the longevity and optimal performance of your Hot Wheels City Shark Chomp Beach Playset:

• Regularly inspect all track connections and moving parts for wear or damage.
• Clean the playset with a soft, damp ткань. Не используйте агрессивные химикаты или абразивные чистящие средства.
• Когда игровой набор не используется, храните его в сухом, прохладном месте, вдали от прямых солнечных лучей.
• Ensure cars are clean and free of debris to maintain smooth operation on the track.

Поиск неисправностей

Если у вас возникли проблемы с игровым комплектом, обратите внимание на следующее:

• Автомобиль не заводится должным образом: Ensure the launcher is fully pulled back and released with sufficient force. Check that the car is correctly positioned in the launcher.
• Shark not 'chomping' or 'knocking out': Verify that the car is hitting the activation points within the shark's mouth. Adjust launch force as needed.
• Сход вагонов с рельсов: Check all track connections to ensure they are securely fastened. Ensure the playset is on a flat, stable surface.
• Недостающие части: Refer to the 'What's Included' section. If parts are missing upon unboxing, contact customer support.

Технические характеристики

Гарантия и поддержка

This product is sold without a manufacturer's warranty. For any product-related inquiries or support, please refer to the retailer's return and exchange policies or contact Hot Wheels customer service directly.