YITAHOME Commercial Ice Machine SC

YITAHOME 22" Commercial Ice Maker Machine 600 LBS - Instruction Manual

Model: Commercial Ice Machine SC

1. Введение

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your YITAHOME 22" Commercial Ice Maker Machine. Please read this manual thoroughly before operating the appliance and retain it for future reference. Proper use and care will ensure optimal performance and longevity of your ice machine.

2. Инструкции по технике безопасности

ВНИМАНИЕ: Несоблюдение данных инструкций по технике безопасности может привести к пожару, поражению электрическим током, серьезным травмам или смерти.

  • Убедитесь, что льдогенератор подключен к правильно заземленной электрической розетке с соответствующим напряжением.tage, как указано на этикетке с рейтингом.
  • Do not operate the appliance with a damaged power cord or plug. If damaged, contact qualified service personnel for replacement.
  • Не допускайте засорения вентиляционных отверстий в корпусе прибора или во встроенной конструкции.
  • Не используйте механические устройства или другие средства для ускорения процесса размораживания, кроме рекомендованных производителем.
  • Не повредите контур хладагента.
  • Не храните в этом приборе взрывоопасные вещества, такие как аэрозольные баллончики с легковоспламеняющимся пропеллентом.
  • Данный прибор не предназначен для использования лицами (включая детей) с ограниченными физическими, сенсорными или умственными способностями или с недостатком опыта и знаний, если они не находятся под присмотром или не получили инструкции по использованию прибора от лица, ответственного за их безопасность.
  • Необходимо следить за детьми, чтобы они не играли с прибором.
  • Перед очисткой или обслуживанием отключите источник питания.
  • Для производства льда используйте только питьевую воду.

3. Содержимое упаковки

Убедитесь, что все компоненты присутствуют и не повреждены при распаковке. Если какие-либо элементы отсутствуют или повреждены, немедленно свяжитесь со службой поддержки клиентов.

  • Промышленный льдогенератор
  • Бункер для хранения льда
  • Лед Совок
  • Ведро со льдом
  • Water Inlet Pipe (x2)
  • Water Outlet Pipe (x2)
  • Сливной шланг (1 шт.)
  • Фильтр для воды (x1)
  • Инструменты для установки
Diagram showing all included accessories: ice maker unit, ice storage bin, water inlet pipes, water outlet pipes, drain hose, tools, water filter, ice scoop, and ice bucket.
Figure 3.1: Included Accessories. This image displays the various components and tools provided with the YITAHOME Commercial Ice Maker Machine, including pipes, hoses, a water filter, an ice scoop, and an ice bucket.

4. Установка и настройка

4.1 Размещение

  • Установите льдогенератор на ровную, устойчивую поверхность, способную выдержать его вес, когда он заполнен льдом и водой.
  • Ensure adequate ventilation around the unit. Maintain at least 6 inches (15 cm) of clearance from walls and other objects.
  • Избегайте воздействия прямых солнечных лучей и источников тепла.
  • Температура окружающей среды должна быть в пределах от 50°F (10°C) до 90°F (32°C).

4.2 Подключение воды

The ice maker requires a continuous supply of potable water and a drain connection.

  1. Connect the water inlet pipe to a cold water supply line with a shut-off valve.
  2. Install the provided water filter in the water inlet line to ensure clean water for ice production.
  3. Connect the other end of the water inlet pipe to the designated inlet on the ice maker.
  4. Connect the drain hose to the ice maker's drain outlet and route it to a floor drain or suitable wastewater receptacle. Ensure the drain hose has a continuous downward slope to prevent water accumulation.
  5. For water-cooled models, connect the condensation inlet and outlet pipes as per the diagram to a separate water supply and drain, if applicable.

4.3 Электрическое подключение

  • Plug the ice maker into a dedicated, grounded electrical outlet. Refer to the product specifications for voltagе и ampвозрастные требования.
  • Не используйте удлинители или вилки-переходники.

4.4 Первоначальная очистка

Before first use, it is recommended to perform an initial cleaning cycle. Refer to the 'Automatic Cleaning' section for instructions.

Diagram illustrating the easy installation process of the ice maker, showing connections for condensed inlet, ice-making inlet, sink drainage outlet, and condensation outlet, along with a water filter.
Figure 4.1: Easy Installation Diagram. This diagram visually guides the user through connecting the water supply, drainage, and filter for the ice maker.

5. Инструкция по эксплуатации

5.1 Панель управления оконченаview

The ice maker features an advanced control panel for easy operation. Familiarize yourself with the buttons and indicators:

  • Кнопка включения/выключения: Включает и выключает устройство.
  • Кнопка очистки/размораживания: Initiates the automatic cleaning or de-icing cycle.
  • Кнопка таймера: Sets or cancels the scheduled boot timer.
  • Кнопки таймера +/-: Регулирует настройки таймера или толщину льда.
  • Отображение температуры: Shows current temperature or error codes.
  • Показатели: Light, Compressor, De-icing, Water Shortage, Fault.
Крупный план view of the advanced control panel with labels for each button and indicator, including On/Off, Clean/De-icing, Timer, Timer +/-, Temperature Display, Light, Compressor, De-icing, Water Shortage, and Fault.
Figure 5.1: Advanced Control Panel. This image highlights the various functions and indicators on the ice maker's digital control panel.

5.2 Включение/выключение питания

Нажмите Вкл/Выкл button to start or stop the ice maker. The unit will begin the ice-making process automatically once powered on and connected to water.

5.3 Производство льда

The YITAHOME ice maker is designed for efficient ice production, capable of producing up to 600 LBS of ice per 24 hours. Each ice-making cycle typically takes 8-15 minutes, yielding approximately 238 pieces of ice.

Diagram illustrating efficient ice making, showing the internal compressor, ice production rate of 8-15 minutes for 238 pieces, 600 LBS per 24 hours capacity, 360 LBS storage, and adjustable height feet.
Figure 5.2: Efficient Ice Making. This diagram details the ice production capabilities and key features like the upgraded compressor and storage capacity.

5.4 Регулировка толщины льда

You can adjust the thickness of the ice cubes to suit your preference:

  • Используйте Таймер + button to increase ice thickness (longer freezing time).
  • Используйте Таймер - button to decrease ice thickness (shorter freezing time).
  • Thin ice: 5-10 minutes
  • Medium ice: 10-15 minutes
  • Thick ice: 15-20 minutes
Diagram showing three ice cubes with different thicknesses labeled Thin (5-10 min), Medium (10-15 min), and Thick (15-20 min), illustrating the adjustable ice cube size feature.
Figure 5.3: Adjustable Ice Cube Size. This image demonstrates the different ice cube thicknesses that can be produced by the machine.

5.5 Функция автоматической очистки

The ice maker features an automatic cleaning function to simplify maintenance:

  1. Ensure the ice maker is connected to a water supply and drain.
  2. Нажмите Clean/De-icing кнопка на панели управления.
  3. The unit will initiate a 20-minute automatic cleaning cycle.
  4. After the cycle, the unit will return to standby or resume ice production.
Diagram showing the automatic cleaning function, with an arrow pointing from the 'Clean/De-icing' button to a visual representation of water circulating inside the ice maker for 20 minutes.
Figure 5.4: Automatic Cleaning. This image illustrates the process of activating and performing the automatic cleaning cycle.

6. Ice Storage and Insulation

The integrated ice storage bin has a capacity of 360 LBS. The bin features a thickened foam layer and food-grade PP injection liner, designed to prevent ice melting for up to 8 hours, ensuring ice remains frozen for extended periods.

Diagram illustrating the 'Ultimate Protection' features of the ice maker's storage bin, showing a thickened foam layer and food-grade PP injection liner, designed to prevent ice melting for up to 8 hours.
Figure 6.1: Ultimate Protection for Ice Storage. This image highlights the insulation features of the ice bin, designed to maintain ice integrity.

7. Техническое обслуживание и чистка

Regular maintenance is crucial for the efficient and hygienic operation of your ice maker.

7.1 Регулярная уборка

  • Экстерьер: Wipe the stainless steel exterior with a soft cloth and mild detergent. Avoid abrasive cleaners.
  • Контейнер для льда: Periodically empty the ice bin and clean its interior with a solution of mild soap and water. Rinse thoroughly and sanitize if necessary.
  • Водопроводы: Ensure water lines are free from blockages.

7.2 Удаление накипи

Over time, mineral deposits can accumulate in the water system. Perform descaling as needed, or at least every 3-6 months, using a commercial ice maker descaling solution. Follow the descaling product's instructions carefully.

7.3 Замена фильтра для воды

Для обеспечения оптимального качества льда и производительности аппарата водяной фильтр следует регулярно заменять, как правило, каждые 3-6 месяцев, в зависимости от качества воды и интенсивности использования.

8. Поиск Неисправностей

В таблице ниже приведены распространенные проблемы и возможные решения. Если проблема не исчезнет, ​​обратитесь в службу поддержки клиентов.

ПроблемаВозможная причинаРешение
Льдогенератор не производит ледNo water supply; Water filter clogged; Power issue; Ambient temperature too high; Refrigerant leak.Check water connection and valve; Replace water filter; Check power cord and outlet; Ensure proper ventilation; Contact service technician.
Производство льда идет медленноClogged water filter; High ambient temperature; Poor ventilation; Mineral buildup.Replace water filter; Improve ventilation; Perform descaling; Ensure proper room temperature.
Ice cubes are too thin or too thickНеверно задана толщина льда.Adjust ice thickness using the Timer +/- buttons on the control panel.
Утечка водыLoose water connections; Clogged drain hose; Damaged water lines.Tighten all water connections; Clear drain hose; Inspect and replace damaged lines.
Отображается код ошибкиКонкретная системная ошибка.Refer to the error code section in the full manual (if available) or contact customer support with the specific code.

9. Технические характеристики

ОсобенностьСпецификация
БрендYITAHOME
Название моделиCommercial Ice Machine SC
Размеры продукта33"Г x 22"Ш x 63.6"В (83.8 см Г x 55.9 см Ш x 161.5 см В)
Мощность производства льда600 LBS per 24 hours
Емкость хранения льда360 ФУНТА
Ватtage1100 Вт
Тип охлажденияС водяным охлаждением
МатериалНержавеющая сталь
СертификатыETL & DOE Certificated

10. Гарантия и поддержка клиентов

For warranty information, technical assistance, or to order replacement parts, please contact YITAHOME customer support. Keep your purchase receipt and product model number readily available when contacting support.

Контактные данные службы поддержки обычно можно найти на сайте производителя. webсайте или через точку покупки.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.