Orion Motor Tech Auto AC Vacuum Pump Kit & Digital Refrigerant Charging Scale User Manual

1. Введение

This manual provides detailed instructions for the safe and effective operation, setup, and maintenance of your Orion Motor Tech Auto AC Vacuum Pump Kit and 220 lb High Precision Electronic Digital Refrigerant Charging Weight Scale. Please read this manual thoroughly before use to ensure proper function and to prevent damage to the equipment or injury.

Image 1.1: The Orion Motor Tech Auto AC Vacuum Pump and Digital Refrigerant Charging Scale, shown together as a complete bundle.

2. Информация по технике безопасности

Для снижения риска травм или повреждения оборудования всегда соблюдайте следующие меры предосторожности:

• Wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when handling refrigerants or operating the vacuum pump.
• Обеспечьте хорошую вентиляцию рабочей зоны, чтобы предотвратить скопление паров хладагента.
• Do not operate the vacuum pump in wet conditions or expose it to rain.
• Перед выполнением любых работ по техническому обслуживанию или чистке отключите питание.
• Handle refrigerants according to local and national regulations.
• Не допускайте детей и посторонних лиц к работающему оборудованию.

3. Продукт закончилсяview

3.1. Auto AC Vacuum Pump

The vacuum pump is designed for efficient evacuation of HVAC systems, compatible with various refrigerants including R12, R22, R134a, R410a, and R1234yf. It features a robust motor and durable construction.

Изображение 3.1: Подробный view of the Orion Motor Tech Auto AC Vacuum Pump, highlighting its compact design and connection ports.

Ключевые компоненты:

• Двигатель: 1/3 hp all-copper motor for reliable performance.
• Casing: Reinforced aluminum alloy for heat dissipation and corrosion resistance.
• Intake Filter & Trap: Protects the pump from contaminants.
• Смотровое стекло: Allows monitoring of oil level and condition.
• Крышка маслозаливной горловины: Multipurpose design with pores and filter to minimize noise and simplify oil charging.
• Переносная ручка: Для удобства транспортировки.

3.2. Digital Refrigerant Charging Weight Scale

The electronic digital scale provides high precision for refrigerant charging and recovery, ensuring accurate measurements for HVAC systems. It is designed for durability and portability.

Image 3.2: The Orion Motor Tech Digital Refrigerant Charging Weight Scale, shown within its protective carrying case.

Основные характеристики:

• Высокая точность: Provides precise measurements for refrigerant charging.
• Fast-Response Sensor: Ensures quick and reliable readings.
• Backlit LCD Controller: Для обеспечения хорошей видимости в различных условиях освещения.
• Интуитивно понятное управление: Easy to operate with ON/OFF, Z/T (Zero/Tare), and UNIT buttons.
• Прочная конструкция: Built from aluminum alloy, waterproof, and suitable for various temperatures.
• Портативность: Compact, lightweight design with an included carrying case.
• Длительный режим ожидания: Up to 60 hours of standby time, retaining the last reading after power outage.

4. Технические характеристики

4.1. Auto AC Vacuum Pump Specifications

Image 4.1: Visual representation of the vacuum pump's key specifications and dimensions.

4.2. Digital Refrigerant Charging Weight Scale Specifications

Image 4.2: Illustration demonstrating the high accuracy of the digital refrigerant scale during an AC charging process.

5. Настройка

5.1. Vacuum Pump Setup

1. Размещение: Установите вакуумный насос на устойчивую ровную поверхность в хорошо проветриваемом помещении.
2. Заправка маслом: Unscrew the oil cap. Carefully pour vacuum pump oil into the oil inlet until the oil level is between the MIN and MAX marks on the sight glass. Do not overfill.


Изображение 5.1: Крупный план view of the vacuum pump's multipurpose oil cap and oil inlet, showing the process of refilling oil.

3. Подключение питания: Подключите шнур питания к заземленной электрической розетке (110 В/60 Гц).
4. Первоначальная проверка: Briefly turn on the pump to ensure it operates smoothly, then turn it off.

5.2. Digital Refrigerant Charging Weight Scale Setup

1. Установка аккумулятора: Open the battery compartment on the back of the LCD controller and insert a 9V DC battery (not included), observing polarity.
2. Размещение: Place the scale platform on a firm, level surface.
3. Подключение контроллера: Ensure the coiled cable from the scale platform is securely connected to the LCD controller.
4. Включение питания: Press the 'ON/OFF' button on the LCD controller to power on the scale.
5. Ноль/Тара: Press the 'Z/T' button to zero the scale before placing any refrigerant tanks on it.
6. Выбор единицы: Press the 'UNIT' button to cycle through available units (kg, oz, lb).

6. Инструкция по эксплуатации

6.1. Vacuum Pump Operation (System Evacuation)

1. Подсоедините шланги: Connect the appropriate manifold gauge set hoses to the vacuum pump and the HVAC system service ports. Ensure all connections are tight.
2. Открытые клапаны: Open the high and low side valves on the manifold gauge set.
3. Запуск насоса: Turn on the vacuum pump. Monitor the manifold gauges to observe the vacuum level.
4. Время эвакуации: Allow the pump to run until the desired vacuum level (e.g., 500 microns or lower) is achieved and held steady for a specified period (consult HVAC system manufacturer specifications). The pump has a 30-minute duty cycle.
5. Закрыть клапаны: Once evacuation is complete, close the manifold gauge set valves before turning off the vacuum pump.
6. Отключить: Turn off the vacuum pump and disconnect the hoses.

6.2. Digital Refrigerant Charging Operation

1. Prepare Scale: Power on the scale and ensure it is zeroed ('Z/T' button). Select the desired unit ('UNIT' button).
2. Place Tank: Carefully place the refrigerant tank onto the center of the scale platform.


Image 6.1: The digital refrigerant scale in operation, accurately measuring the weight of a refrigerant tank connected to an AC system.

3. Вес тары: If the tank is not empty, press the 'Z/T' button to tare the weight of the tank, so the display shows 0.000. This allows you to measure the amount of refrigerant added or removed.
4. Подсоедините шланги: Connect the appropriate manifold gauge set hose from the refrigerant tank to the HVAC system.
5. Charge/Recover: Open the tank valve and the manifold gauge valve to begin charging or recovering refrigerant. Monitor the weight displayed on the scale.
6. Монитор: Stop the process once the desired amount of refrigerant has been transferred, as indicated by the scale reading.
7. Close Valves & Disconnect: Close all valves and disconnect hoses.

7. Техническое обслуживание

7.1. Vacuum Pump Maintenance

• Замена масла: Regularly check the oil level and condition via the sight glass. Change the vacuum pump oil after every 10-20 hours of operation or if it appears cloudy or discolored. To change oil, drain the old oil from the drain plug and refill with new vacuum pump oil to the correct level.
• Уборка: Содержите внешнюю поверхность насоса в чистоте и удаляйте с нее мусор.
• Хранилище: Store the pump in a dry, clean environment when not in use.

7.2. Digital Refrigerant Charging Weight Scale Maintenance

• Уборка: Wipe the scale platform and controller with a damp Ткань. Не используйте абразивные чистящие средства.
• Замена батареи: Replace the 9V battery when the low battery indicator appears on the LCD. Remove the battery if the scale will not be used for an extended period.
• Хранилище: Store the scale in its protective carrying case in a dry place to prevent damage.

8. Поиск Неисправностей

8.1. Vacuum Pump Troubleshooting

8.2. Digital Refrigerant Charging Weight Scale Troubleshooting

9. Гарантия и поддержка

Orion Motor Tech products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your product packaging or visit the official Orion Motor Tech webсайт.

Пожалуйста, сохраните документ, подтверждающий покупку, для претензий по гарантии.