JOYO Orthros Selector JF-24 Guitar Pedal and DC 9V Power Adapter User Manual

1. Введение

The JOYO Orthros Selector JF-24 is a versatile line selector guitar pedal designed to enhance your guitar rig by offering two independent effect loops and multiple looping modes. This device allows for flexible integration of various effects pedals and digital devices, providing greater control over your sound. This bundle also includes a JOYO DC 9V 500mA power adapter, ensuring reliable power for your pedal.

Image 1: JOYO Orthros Selector JF-24 Guitar Pedal

2. Содержимое упаковки

Пожалуйста, проверьте содержимое упаковки, чтобы убедиться в наличии всех предметов:

• JOYO Line Selector Guitar Pedal (ORTHROS SELECTOR JF-24)
• JOYO DC 9V 500mA Pedal Power Supply Adapter

3. Элементы управления и функции

The JF-24 features intuitive controls for managing your effect loops:

• 1. LINE A LEVEL Control Knob: Регулирует уровень выходного сигнала линии А.
• 2. LINE B LEVEL Control Knob: Регулирует уровень выходного сигнала линии B.
• 3. LINE Mode Selection Control Knob: Выбирает один из шести доступных режимов зацикливания.
• Педальный переключатель: Engages or bypasses the selected effect loop(s) or switches between outputs depending on the mode.
• Входной разъем: Connect your guitar or the output of previous pedals in your signal chain here.
• ВЫХОДНОЙ разъем: Подключитесь к вашему amplifier or the input of subsequent pedals.
• SEND A / RETURN A Jacks: For connecting effects pedals to Line A.
• SEND B / RETURN B Jacks: For connecting effects pedals to Line B.
• Вход постоянного тока 9 В: For connecting the included 9V DC power adapter.

Image 2: Labeled controls of the JF-24 pedal

4. Настройка

4.1. Подключение питания

Connect the included DC 9V 500mA power adapter to the DC 9V input jack on the pedal. Ensure the adapter is center-negative. Using an incorrect power supply can damage the unit.

4.2 Подключение прибора

Connect your guitar to the INPUT jack of the JF-24. Connect the OUTPUT jack of the JF-24 to your amplifier или следующая педаль в вашей сигнальной цепочке.

Image 3: JF-24 connected in a basic setup

4.3. Connecting Effect Loops

The JF-24 features two independent effect loops, Line A and Line B. To connect pedals to a loop:

1. Подключите ОТПРАВИТЬ jack to the input of the first pedal in your Line A effect chain.
2. Connect the output of the last pedal in your Line A effect chain to the ВОЗВРАТ А Джек.
3. Repeat the process for Line B using the ОТПРАВИТЬ B и ВОЗВРАТ B домкраты.

Image 4: Diagram showing two line loops (A and B) for connecting effects

5. Режимы работы

The JF-24 offers six looping modes, selectable via the LINE Mode Selection Control Knob. These modes allow for various configurations of your effect loops:

• 1. A/B: Переключение между линейной петлей A и линейной петлей B.
• 2. A/BYPASS: Switches between Line Loop A and a bypassed signal (dry guitar signal).
• 3. B/BYPASS: Switches between Line Loop B and a bypassed signal (dry guitar signal).
• 4. A/B/BYPASS: Cycles through Line Loop A, Line Loop B, and a bypassed signal.
• 5. A+B/BYPASS: Switches between both Line Loop A and Line Loop B engaged simultaneously, and a bypassed signal.
• 6. A/B/OUT SELECT: This mode allows you to use the SEND A, SEND B, and OUTPUT jacks as three independent outputs. Your guitar signal goes into the INPUT, and you can switch between sending it to SEND A, SEND B, or the main OUTPUT. This is useful for routing your signal to different amplifiers (e.g., guitar amp, бас amp, tuner) or other destinations. In this mode, the RETURN A and RETURN B jacks are not used for effect loops.

Image 5: Diagram illustrating the 6 looping modes

6. Технические характеристики

• Модель: JF-24
• Тип разъема: 1/4" Mono Jack, 2.1mm Barrel Connector
• Формат сигнала: Аналоговый
• Источник питания: Проводной (9 В постоянного тока, центральный контакт отрицательный)
• Томtage: 9 Вольт (постоянный ток)
• Потребление тока: 22мА
• Тип управления: Footswitch, Rotary Knobs
• Размеры (прибл.): 120 мм (4.72 дюймов) x 97 мм (3.81 дюйма) x 55 мм (2.17 дюйма)

Image 6: Dimensions and power supply tips for the JF-24

7. Информация об адаптере питания

The included JOYO DC 9V 500mA Pedal Power Adapter is designed with smart and professional IC chips for noise reduction and isolated safe protection performance. It is compatible with most pedals requiring a tip-negative 9V power supply.

Image 7: Features of the included DC 9V 500mA power adapter

7.1. Совместимость

The JF-24 is designed to work with a wide range of effect pedals. The power adapter is also compatible with most brands of pedals requiring a tip-negative 9V power supply.

Image 8: JF-24 compatibility with various pedal brands

8. Поиск Неисправностей

• Нет звука: Ensure all cables are securely connected to the correct input/output jacks. Verify the power adapter is properly connected and supplying power. Check the volume levels on your guitar, pedal, and ampпожизненнее.
• Неожиданный шум: Ensure all connections are tight. Use a high-quality, isolated power adapter to minimize noise. If using multiple pedals, ensure they are properly grounded.
• Педаль не включается: Check the selected operating mode. Some modes may require specific configurations for the footswitch to activate loops.
• Потеря качества звука: If you experience tone loss when a pedal is off but still in a loop, consider placing that pedal in one of the JF-24's loops and using the selector to bypass it completely when not in use.

9. Техническое обслуживание

To ensure the longevity and optimal performance of your JOYO Orthros Selector JF-24:

• Держите педаль в чистоте, удаляя пыль и мусор. Для чистки используйте мягкую сухую ткань.
• Избегайте воздействия на педаль экстремальных температур, влажности или прямых солнечных лучей.
• Не пытайтесь разбирать или модифицировать педаль, так как это может привести к аннулированию гарантии и повреждению.
• Always use the correct power supply (DC 9V, center negative) to prevent damage.

10. Гарантия и поддержка

Для получения информации о гарантии, технической поддержке или по вопросам обслуживания обращайтесь на официальный сайт JOYO. website or contact your authorized JOYO dealer. Keep your purchase receipt as proof of purchase for warranty claims.