ROCAM CR1028EM Loud Vibrating Alarm Clock User Manual

Введение

The ROCAM CR1028EM Loud Vibrating Alarm Clock is designed to provide a reliable wake-up solution for heavy sleepers, individuals with hearing impairment, and anyone needing a robust alarm. It features a large LED digital display, dual alarms, adjustable brightness, a nightlight, and a bed shaker for enhanced wake-up effectiveness.

This manual provides detailed instructions for setting up, operating, and maintaining your alarm clock to ensure optimal performance.

Содержимое упаковки

• 1x ROCAM CR1028EM Alarm Clock
• 1x адаптер питания (DC 5V / 2A)
• 1x Bed Shaker (Length: 1.8m/6ft)
• Зарядный кабель USB 1x
• 1x Руководство пользователя

Продукт болееview & Элементы управления

Familiarize yourself with the alarm clock's components and control buttons:

Изображение: Спереди view of the ROCAM CR1028EM alarm clock, showing the large LED display with time and day indicators.

Кнопки верхней панели:

• TIME/DIM: Press to set time and date. Long press to adjust display brightness.
• АЛ1: Short press to turn Alarm 1 on/off. Long press to set Alarm 1.
• АЛ2: Short press to turn Alarm 2 on/off. Long press to set Alarm 2.
• - / +: Настройте значения в процессе установки режимов.
• VOL / 12/24H DST: Adjust alarm volume. Short press to switch between 12/24 hour format. Long press to activate/deactivate Daylight Saving Time (DST).
• SNOOZE/OK/LIGHT: Press to snooze a sounding alarm (9 minutes). In normal mode, short press to adjust nightlight brightness. Long press to confirm settings.

Image: Diagram showing the layout and functions of the control buttons on the top of the alarm clock.

Rear Panel Ports & Switches:

• Отсек для батареи: Holds 2x AAA batteries (not included) for time memory and alarm backup during power outagес.
• Спикер: For audible alarm sound.
• Vibration Intensity Switch (H/M/L): Adjusts the strength of the bed shaker.
• Порт постоянного тока: Подключается к адаптеру питания.
• USB Output Port (5V 1A): Для зарядки внешних устройств, таких как смартфоны.
• Bed Shaker Power Port: Connects the bed shaker.
• Day Selection Switches (MON-SUN, MON-FRI, SAT-SUN): Set alarm days for Alarm 1 and Alarm 2 independently.

Image: Diagram illustrating the ports, switches, and battery compartment on the rear panel of the alarm clock.

Настраивать

1. Подключение питания: Connect the power adapter to the DC IN port on the back of the alarm clock, then plug the adapter into a standard wall outlet.
2. Установка батареи (опционально): Open the battery compartment on the rear and insert 2x AAA batteries. These batteries serve as a backup for time settings and alarm functionality during power interruptions. The display will turn off when running on battery power only, but the alarm will remain active.
3. Bed Shaker Connection: Plug the bed shaker cable into the Bed Shaker Power Port on the rear of the alarm clock. Place the bed shaker under your pillow or mattress for optimal vibration.
4. Начальная установка времени:
   • Нажмите и удерживайте TIME/DIM Нажимайте кнопку до тех пор, пока цифры не начнут мигать.
   • Используйте + or - Кнопки для настройки часа. Нажмите TIME/DIM again to move to minutes.
   • Используйте + or - Нажмите кнопки для регулировки минут. TIME/DIM again to move to the day of the week.
   • Используйте + or - кнопки для выбора текущего дня.
   • Нажимать TIME/DIM or SNOOZE/OK/LIGHT для подтверждения и выхода из режима установки времени.

Инструкция по эксплуатации

Setting Alarms (AL1 & AL2):

1. Нажмите и удерживайте либо АЛ1 or АЛ2 button until the alarm time digits start flashing.
2. Используйте + or - buttons to adjust the hour. Press the respective AL button again to move to minutes.
3. Используйте + or - buttons to adjust the minutes. Press the respective AL button again to select the alarm mode (Buzzer Only, Vibration Only, or Both).
4. Используйте + or - buttons to choose the desired alarm mode.
5. Нажмите соответствующую кнопку AL или SNOOZE/OK/LIGHT to confirm and save the alarm setting.

Включение/выключение будильника:

• Короткое нажатие АЛ1 or АЛ2 button to toggle the alarm on or off. The corresponding alarm icon will appear/disappear on the display.
• To completely cancel an alarm for the next day, press and hold the respective AL button until the alarm indicator disappears.

Функция повтора:

• Когда прозвучит сигнал будильника, нажмите кнопку SNOOZE/OK/LIGHT button to activate snooze. The alarm will temporarily stop and ring again after 9 minutes. This can be repeated up to 9 times.

Регулировка яркости дисплея:

• В обычном режиме отображения времени коротко нажмите TIME/DIM button to cycle through 5 levels of display brightness (L05 being brightest, L01 being dimmest).

Using the Nightlight:

• В обычном режиме отображения времени коротко нажмите SNOOZE/OK/LIGHT button to cycle through 3 levels of nightlight brightness (High, Medium, Low, Off).

Регулировка интенсивности вибрации:

• On the rear panel, slide the Vibration Intensity Switch to H (High), M (Medium), or L (Low) to set the desired strength of the bed shaker.

Зарядка внешних устройств:

• Connect your mobile device's USB charging cable (not included) to the USB Output Port (5V 1A) on the rear of the alarm clock.

Интеграция медиа

Image: The ROCAM CR1028EM alarm clock displayed next to its bed shaker, highlighting the dual wake-up functionality.

Image: The ROCAM CR1028EM alarm clock on a nightstand, showing a smartphone charging via its built-in USB port.

Image: The ROCAM CR1028EM alarm clock with its nightlight feature illuminated, providing a soft glow.

Поиск неисправностей

• Сигнализация не срабатывает/не вибрирует: Ensure the alarm is enabled (icon visible on display) and the volume/vibration intensity is set appropriately. Check power connection and battery backup.
• Дисплей слишком яркий/тусклой: Adjust display brightness using the TIME/DIM кнопка.
• Time incorrect: Re-set the time following the "Initial Time Setting" instructions. Check DST setting if applicable.
• Bed shaker not working: Ensure the bed shaker is securely plugged into its dedicated port and the vibration intensity switch is not set to 'Off' or 'Low' if a stronger vibration is desired.

Технические характеристики

Гарантия и поддержка

Your ROCAM CR1028EM Loud Vibrating Alarm Clock comes with:

• 18-месяц Гарантия: If the product has any quality issues, please contact ROCAM for a replacement or partial refund.
• Lifetime Free Customer Support: ROCAM provides lifelong free customer support. If you have any questions or concerns, please do not hesitate to reach out.

For support, please contact ROCAM via:

• Электронная почта: Support@yelaw.net
• Webсайт: http://www.yelaw.net