upHere UP1 Series (B0D8VS42T8)

upHere UP1 Series CPU Air Cooler Instruction Manual

Model: UP1 Series (B0D8VS42T8)

1. Продукт закончилсяview

The upHere UP1 Series CPU Air Cooler is designed to provide efficient cooling for your CPU. It features four 6mm copper heat pipes and a 120mm PWM fan, ensuring optimal thermal performance while maintaining quiet operation. This cooler is compatible with a wide range of Intel and AMD sockets, offering broad applicability for various PC builds.

Основные характеристики:

  • Универсальная совместимость: Supports Intel LGA 1851/1700/1150/1155/1156/1200/1121/1366/1356/2011/2066 (X79/X99) and AMD AM5/AM4/AM3/AM2/FM2/FM1 series sockets.
  • Exceptional Cooling Performance: Features four 6mm heat pipes for efficient heat dissipation and a direct heat pipe contact area of 25mm.
  • Тихая работа: Equipped with a 120mm fan operating at a maximum speed of 1650rpm ±10%, delivering 68.2CFM airflow with noise levels below 26dB(A).
  • Easy Installation & RAM Clearance: Designed for non-disassembly fan installation and provides clearance for tall RAM modules.
  • Versatile Power Connectivity: Utilizes a 4-pin power port and operates at 12V.

2. Содержимое упаковки

Перед началом установки убедитесь, что все компоненты присутствуют:

  • upHere UP1 Series CPU Air Cooler (Heatsink with 120mm Fan)
  • Intel Mounting Kit (Backplate, brackets, screws)
  • AMD Mounting Kit (Brackets, screws)
  • Термопаста
  • Шпатель для термопасты
  • Руководство пользователя

3. Руководство по установке

Follow these steps carefully to install your upHere UP1 Series CPU Air Cooler. Ensure your system is powered off and unplugged before beginning.

3.1. Подготовьте материнскую плату

В зависимости от типа процессорного разъема (Intel или AMD) выберите соответствующие крепежные элементы.

Видео: Installation for upHere UP1 Series CPU Air Cooler. This video demonstrates the step-by-step process for installing the cooler on both Intel and AMD platforms, including backplate setup, bracket attachment, thermal paste application, and cooler mounting.

For Intel Sockets (LGA 1851/1700/1150/1155/1156/1200/1121/1366/1356/2011/2066):

  1. Attach the universal backplate to the rear of the motherboard, aligning the holes with the CPU socket. Adjust the backplate clips for your specific socket type (e.g., 115X/1200, 1700, 1366).
  2. Secure the Intel mounting brackets to the front of the motherboard using the provided screws. Tighten them evenly.

For AMD Sockets (AM5/AM4/AM3/AM2/FM2/FM1):

  1. Remove the existing plastic retention modules from the motherboard, but retain the original AMD backplate.
  2. Install the AMD mounting brackets onto the motherboard, aligning them with the backplate screw holes. Secure them with the provided screws.

3.2. Нанесите термопасту.

Apply a small amount of thermal paste (pea-sized dot) to the center of your CPU's integrated heat spreader (IHS). Use the provided spatula to spread it evenly into a thin layer across the entire surface of the IHS.

Close-up of the CPU cooler's copper heat pipes making direct contact with a surface.

Изображение: The cooler features four pure copper direct contact heat pipes designed to efficiently transfer heat from the CPU.

3.3. Mount the CPU Cooler

  1. Remove the protective film from the cooler's base.
  2. Carefully place the CPU cooler onto the CPU, aligning the mounting holes on the cooler with the standoffs or brackets on the motherboard.
  3. Using a screwdriver, tighten the screws on the cooler in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) until snug. Do not overtighten.
A screwdriver being used to install the CPU cooler onto a motherboard, showing the easy installation process from above.

Изображение: The cooler is designed for easy installation from above, without needing to remove the fan.

3.4. Подключите кабель вентилятора

Locate the 4-pin CPU fan header on your motherboard (usually labeled 'CPU_FAN' or similar). Connect the cooler's 4-pin PWM cable to this header.

Close-up of the CPU cooler installed in a PC case, showing the 4-pin power connector.

Изображение: The 4-pin power connector ensures compatibility with various motherboard configurations.

4. Инструкция по эксплуатации

Once installed, the upHere UP1 Series CPU Air Cooler operates automatically based on your motherboard's fan control settings. The 4-pin PWM connection allows the motherboard to dynamically adjust the fan speed according to CPU temperature, optimizing for both cooling performance and noise levels.

Fan Speed and Noise:

  • The 120mm fan operates within a speed range of 600-1650 RPM ±10%.
  • At maximum speed, the fan delivers an airflow of 68.2 CFM.
  • Noise levels are kept below 26 dB(A) for quiet operation.
Diagram showing the performance specifications of the PWM fan, including noise level, speed, and airflow.

Изображение: Performance specifications of the PWM fan, highlighting quiet and efficient cooling.

5. Техническое обслуживание

Регулярное техническое обслуживание обеспечивает оптимальную производительность и долговечность вашего кулера для процессора.

  • Удаление пыли: Периодически очищайте ребра радиатора и лопасти вентилятора, чтобы предотвратить скопление пыли, которая может препятствовать потоку воздуха и снижать эффективность охлаждения. Используйте сжатый воздух или мягкую щетку.
  • Термопаста: Повторно нанесите термопасту, если по какой-либо причине снимаете кулер или если замечаете значительное повышение температуры процессора с течением времени.
  • Проверка вентилятора: Check the fan for any unusual noises or wobbling. If the fan is damaged or excessively noisy, consider replacing it.

6. Поиск Неисправностей

Если у вас возникли проблемы с кулером процессора, воспользуйтесь следующими распространенными шагами по устранению неполадок:

  • Вентилятор не вращается: Ensure the 4-pin PWM cable is securely connected to the CPU_FAN header on the motherboard. Check BIOS/UEFI settings to confirm fan control is enabled and configured correctly.
  • Высокие температуры процессора: Verify that the cooler is properly seated on the CPU and that the mounting screws are tightened evenly. Ensure sufficient thermal paste was applied. Check for adequate airflow within your PC case.
  • Чрезмерный шум: Confirm that the fan blades are free from obstructions. Check if the fan is securely mounted and not vibrating against other components. Adjust fan speed settings in BIOS/UEFI if necessary.
  • Проблемы совместимости: Double-check that your motherboard socket is listed as compatible with this cooler.

If problems persist, contact upHere customer support for further assistance.

7. Технические характеристики

Detailed technical specifications for the upHere UP1 Series CPU Air Cooler:

Размеры продукта5.12"Д x ​​2.87"Ш x 6.1"В (130 мм x 73 мм x 155 мм)
Тепловая трубка4 медных тепловых трубок диаметром Φ6 мм
Скорость вентилятора600-1650 об/мин ±10%
Емкость воздушного потока68.2 куб. футов в минуту
Уровень шума26 дБ(А) (макс.)
Тип подшипникаГидро Подшипник
Fan Connector Type4-Pin PWM
Томtage12 Вольт (постоянный ток)
Ватtage1.45 Вт
Метод охлажденияВоздух
МатериалАлюминий (радиатор)
Diagram showing the technical specifications and dimensions of the CPU cooler.

Изображение: Detailed technical specifications and physical dimensions of the cooler.

8. Гарантия и поддержка

upHere products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official upHere webсайте или обратитесь в их отдел обслуживания клиентов.

Пожалуйста, сохраните документ, подтверждающий покупку, для претензий по гарантии.