1. Введение
The Momcozy KleanPal Pro is an advanced 3-in-1 automatic baby bottle washer designed to simplify the cleaning, sterilization, and drying process for baby bottles and accessories. This manual provides detailed instructions for safe and efficient operation, maintenance, and troubleshooting.
Image 1.1: The Momcozy KleanPal Pro Baby Bottle Washer, a compact and efficient device for bottle care.
2. Информация по технике безопасности
Please read all safety warnings and instructions carefully before using the appliance to avoid injury or damage.
- Всегда устанавливайте прибор на устойчивую ровную поверхность.
- Не погружайте основной блок в воду или другие жидкости.
- Хранить в недоступном для детей месте.
- Use only Momcozy approved cleaning tablets.
- Отключайте прибор от сети перед чисткой или когда он не используется.
- Не работайте, если шнур питания или вилка повреждены.
- Steam is hot; avoid direct contact during operation.
3. Продукт закончилсяview
3.1 Компоненты
- Основной блок с панелью управления
- Прозрачная крышка
- Double Removable Basket (Upper and Lower)
- Водохранилище
- Сливной шланг
- Cleaning Tablets (60 included)
3.2 Панель управления
The control panel features a digital display and various buttons for program selection and operation.
Изображение 3.1: оконченоview of the control panel and available cleaning settings, including Rapid Wash, Deep Wash, Sterilization and Drying, and Sterile Storage.
- Кнопка питания: Включает / выключает устройство.
- Кнопки выбора программ: Rapid, Normal, Steam, Storage.
- Кнопка Пуск / Пауза: Запускает или приостанавливает выбранную программу.
- Цифровой дисплей: Shows remaining time and status indicators (e.g., "NO WATER", "DRYING", "STEAM", "FRESH AIR").
4. Настройка
Выполните следующие шаги для первоначальной настройки перед первым использованием:
- Распаковать: Аккуратно извлеките все компоненты из упаковки.
- Размещение: Place the Momcozy KleanPal Pro on a flat, stable surface near a power outlet and a sink for drainage.
- Подсоедините сливной шланг: Attach the drain hose to the designated port on the unit and direct the other end into a sink or drain.
Image 4.1: Visual guide for the setup process, including plugging in, connecting the drain hose, filling the water reservoir, adding a cleaning tablet, and selecting a program.
- Заполните резервуар для воды: Fill the external water reservoir with distilled or purified water up to the MAX line. Avoid using tap water to prevent mineral buildup.
- Подключить: Connect the power cord to a compatible 220-240V/50-60Hz power outlet.
5. Инструкция по эксплуатации
5.1 Preparing Items for Cleaning
- Rinse bottles and accessories to remove large food particles.
- Place bottles upside down in the lower basket. Nipples, rings, and other small accessories can be placed in the upper basket. The double removable basket can accommodate up to 4 bottles and various accessories.
- The unit is compatible with most wide-neck and narrow-neck bottles, as well as sippy cups, silicone tableware, teething rings, pacifiers, and breast pump parts.
Image 5.1: The KleanPal Pro can wash a variety of baby items, including wide-neck bottles, narrow-neck bottles, sippy cups, tableware, and pump parts.
- Add one Momcozy cleaning tablet to the designated compartment in the unit.
Image 5.2: Place one Momcozy detergent tablet into the compartment for each wash cycle. Only use dedicated Momcozy detergent tablets.
- Плотно закройте прозрачную крышку.
5.2 Program Selection and Operation
The Momcozy KleanPal Pro offers 9 programs, including a 72-hour sterile storage mode. Select the appropriate program based on your needs:
Изображение 5.3: Подробное описаниеview of the available programs: Wash Only, Wash + Sterilization + Drying, Wash + Sterilization + Drying + Storage, and Storage Only.
- Только стирка:
- Rapid Wash (19 min): For recently used bottles with light milk residue.
- Normal Wash (29 min): For bottles with significant dried milk residue.
Image 5.4: Comparison of Rapid Wash for light residue and Normal Wash for dried milk residue.
- Wash + Sterilization + Drying:
- Rapid + Steam (74 min): Wash, sterilize, and dry.
- Normal + Steam (84 min): Wash, sterilize, and dry.
- Steam Only (55 min): Sterilize and dry only.
The sterilization process uses 100°C hot steam to eliminate 99.9% of germs.
Image 5.5: The unit effectively kills 99.9% of germs using natural steam, followed by automatic drying.
- Wash + Sterilization + Drying + Storage:
- Rapid + Steam + Storage (74 min + storage time): Wash, sterilize, dry, and store.
- Normal + Steam + Storage (84 min + storage time): Wash, sterilize, dry, and store.
- Steam + Storage (29 min + storage time): Sterilize, dry, and store.
- Storage Only:
- Storage Mode (72 hours): Keeps items sterile for up to 72 hours. This mode utilizes a H13 HEPA filter to remove 99.93% of airborne particles.
Image 5.6: The unit provides up to 72 hours of sterile and odorless storage, removing 99.93% of airborne particles with its H13 HEPA filter.
After selecting your desired program, press the Старт/Пауза button to begin the cycle. The digital display will show the remaining time and current status.
Image 5.7: Clear status indicators on the screen and a transparent, visible lid allow you to monitor the cleaning progress.
6. Техническое обслуживание
6.1 Чистка устройства
- After each use, ensure the drain hose is properly positioned to allow wastewater to drain automatically.
- Wipe down the interior and exterior of the unit with a damp ткань.
- Periodically clean the removable baskets.
- For thorough cleaning, run a "Steam Only" cycle with an empty unit to descale any mineral buildup.
6.2 Замена НЕРА-фильтра
The H13 HEPA filter should be replaced every 3-5 months, depending on usage, to maintain optimal air filtration during storage mode.
7. Поиск Неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Аппарат не включается. | Не подключено к сети; питание отключеноtagе; неисправная розетка. | Check power connection; test outlet with another device. |
| "NO WATER" indicator. | Водохранилище пустое или уровень воды ниже минимального. | Refill the water reservoir with distilled or purified water. |
| Bottles are not clean. | Insufficient cleaning tablet; heavy residue; improper placement. | Ensure one tablet is used; pre-rinse heavily soiled items; arrange items to allow water circulation. |
| Items are not dry. | Drying cycle interrupted; excessive moisture. | Ensure the drying cycle completes; remove excess water before placing items. |
8. Технические характеристики
| Особенность | Деталь |
|---|---|
| Номер модели | BS03-EUU |
| Бренд | Momcozy |
| Материал | Пластик |
| Размеры (продукт) | Приблизительно 41 см (В) x 25 см (Ш) x 34 см (Г) |
| Вес (продукт) | Approx. 5 kg (based on package weight) |
| Совместимость с питанием | 220-240 V / 50-60 Гц |
| Форсунки для очистки | 26 (12 internal, 14 swirling) |
| Метод стерилизации | 100°C Steam |
| Фильтрация воздуха | H13 HEPA Filter (removes 99.93% airborne particles) |
Image 8.1: The compact dimensions of the Momcozy KleanPal Pro, measuring approximately 41 cm in height, 25 cm in width, and 34 cm in depth.
9. Гарантия и поддержка
The Momcozy KleanPal Pro Baby Bottle Washer comes with a Гарантия 1 год с даты покупки, распространяется на производственные дефекты и неисправности при нормальном использовании.
For technical support, warranty claims, or general inquiries, please contact Momcozy customer service through their official website or the contact information provided with your purchase. Please have your model number (BS03-EUU) and proof of purchase ready when contacting support.
For more information, visit the official Momcozy store: Магазин Momcozy