COMTEC ZDR043 Front and Rear Dash Camera System User Manual

1. Введение

Спасибо за покупкуasing the COMTEC ZDR043 Front and Rear Dash Camera System. This device is designed to record driving footage in Full HD, providing crucial evidence in case of an incident. It features a front camera, a rear camera, GPS functionality, a 2.7-inch LCD, and advanced safety features such as rear vehicle approach alerts and parking surveillance. This package also includes the HDROP-15 direct wiring cord for a stable power supply. Please read this manual thoroughly before installation and operation to ensure correct usage and optimal performance.

2. Продукт закончилсяview

2.1 Основные характеристики

• Запись в формате Full HD с передней и задней панели: Захватывает прозрачную пищуtage from both the front and rear of your vehicle with 2 million effective pixels.
• Функциональность GPS: Records location and speed data, which can be viewed with dedicated playback software.
• Предупреждение о приближении сзади транспортного средства: Notifies the driver when a vehicle approaches too closely from behind, helping to prevent potential road rage incidents.
• Функция видеонаблюдения на парковке: Monitors your vehicle while parked, recording events triggered by impacts or motion (requires HDROP-15 direct wiring).
• High-Speed Start-up: Begins recording quickly after the vehicle starts.
• 2.7-дюймовый ЖК-дисплей: Allows for real-time viewing and playback of recorded footage.
• В комплект входит карта памяти microSD объемом 32 ГБ: Обеспечивает ample storage for recorded video.
• HDROP-15 Direct Wiring Cord: Enables direct power connection to the vehicle's ACC and IG lines for stable operation and parking surveillance.

2.2 Компоненты

The COMTEC ZDR043 system includes the following components:

• ZDR043 Main Unit (Front Camera)
• Задняя камера
• Кабель для подключения задней камеры
• Mounting Bracket (for front camera)
• Cigarette Lighter Power Cable (standard, though HDROP-15 is included in this set)
• Карта microSD на 32 ГБ
• HDROP-15 Direct Wiring Cord (approx. 4.0m)
• Руководство по эксплуатации (данный документ)

2.3 Продукт View

3. Настройка и установка

Proper installation is crucial for the dash camera's performance. It is recommended to have this product installed by a professional if you are not familiar with automotive electrical systems.

3.1 microSD Card Insertion

1. Убедитесь, что видеорегистратор выключен.
2. Locate the microSD card slot on the main unit.
3. Insert the included 32GB microSD card into the slot until it clicks into place. Ensure the correct orientation.
4. Чтобы вынуть карту, аккуратно нажмите на нее, пока она не выскочит.

3.2 Установка передней камеры

1. Choose a location on your windshield that does not obstruct the driver's view and is within the wiper's sweep area. The area behind the rearview Зеркало зачастую является идеальным вариантом.
2. Clean the chosen area thoroughly with an alcohol wipe and let it dry.
3. Attach the mounting bracket to the main unit.
4. Peel off the protective film from the adhesive pad on the mounting bracket.
5. Firmly press the bracket onto the windshield for at least 30 seconds.
6. Adjust the camera angle to ensure the lens captures a clear view of the road ahead, with approximately 60% road and 40% sky.

3.3 Установка задней камеры

1. Select a position on your rear window that provides an unobstructed view and is centrally located.
2. Тщательно очистите выбранный участок.
3. Прикрепите заднюю камеру с помощью клейкого крепления.
4. Route the rear camera connection cable from the rear camera to the main unit, tucking it neatly along the headliner and pillar trims.
5. Connect the cable to the designated rear camera input port on the main unit.

3.4 Power Connection (HDROP-15 Direct Wiring)

The HDROP-15 direct wiring cord (approx. 4.0m) allows for a stable power supply directly from your vehicle's fuse box, enabling parking surveillance mode. This connection typically involves ACC (Accessory) and IG (Ignition) lines.

1. Определение источников питания: Locate suitable ACC (power when ignition is on) and IG (constant power) fuse locations in your vehicle's fuse box. Consult your vehicle's owner's manual or a professional for assistance.
2. Подключите провода: Connect the corresponding wires from the HDROP-15 to the identified power sources using appropriate fuse taps (not included).
3. Заземление: Securely connect the ground wire of the HDROP-15 to a metal part of the vehicle chassis.
4. Подключение к видеорегистратору: Plug the HDROP-15 connector into the power input port on the main unit.
5. Тест: Start your vehicle to confirm the dash camera powers on and begins recording. Turn off the vehicle to test parking surveillance activation.

Осторожность: Incorrect wiring can damage your vehicle's electrical system or the dash camera. If you are unsure, seek professional installation.

4. Инструкция по эксплуатации

4.1 Включение/выключение питания

• Включение питания: The dash camera will automatically power on and begin continuous recording when the vehicle's ignition is turned on (ACC power is supplied).
• Выключение: The dash camera will automatically power off a few seconds after the vehicle's ignition is turned off. If parking surveillance is enabled, it will transition to parking surveillance mode.

4.2 Режимы записи

• Непрерывная запись: Records continuously in short segments (e.g., 1 minute files). When the microSD card is full, the oldest fileс перезаписываются.
• Event Recording (G-sensor): Автоматически сохраняет и блокирует footage when an impact is detected by the G-sensor, preventing it from being overwritten.
• Ручная запись событий: Press a designated button on the unit to manually save and lock the current recording segment.

4.3 Функция GPS

The built-in GPS module records your vehicle's location, speed, and time data. This information is embedded in the video fileс и может быть viewed using the dedicated COMTEC playback software on a computer. Ensure the GPS antenna has a clear view неба для оптимального приема сигнала.

4.4 Rear Vehicle Approach Alert

This function uses the rear camera to detect vehicles approaching rapidly or staying too close behind your car. When a potential threat is detected, the system will issue an audible and/or visual alert on the main unit's display. This feature is designed to increase driver awareness and help prevent dangerous situations.

• Активация: This feature is typically enabled by default or can be configured in the system settings.
• Чувствительность: The sensitivity of the detection can usually be adjusted in the settings menu to suit your driving preferences.

4.5 Функция видеонаблюдения на парковке

When connected via the HDROP-15 direct wiring cord, the ZDR043 can monitor your vehicle while parked. It will automatically start recording if an impact is detected (G-sensor) or if motion is detected in the camera's field of view (motion detection). This provides security even when you are away from your vehicle.

• Настройки: Parking surveillance settings, including sensitivity and recording duration, can be adjusted in the menu.
• Низкая громкостьtage Отключение: The HDROP-15 includes a low voltage cut-off feature to prevent draining your vehicle's battery. You can typically set the voltage threshold in the dash camera's settings.

4.6 LCD Display and Menu Navigation

The 2.7-inch LCD displays live viewзаписанная едаtage, and menu options. Use the physical buttons on the unit to navigate through the menu, adjust settings, and playback videos. Refer to the on-screen prompts for specific button functions.

5. Техническое обслуживание

5.1 Управление картами microSD

• Форматирование: It is recommended to format the microSD card regularly (e.g., once a month) using the dash camera's menu to maintain optimal recording performance and prevent data corruption.
• Замена: microSD cards have a limited lifespan. If you experience recording errors or frequent freezing, consider replacing the card with a high-quality, dash-cam-compatible microSD card.

5.2 Очистка

• Линзы: Gently wipe the front and rear camera lenses with a soft, lint-free cloth to ensure clear video quality. Avoid abrasive materials or harsh chemicals.
• Корпус модуля: Clean the main unit and rear camera body with a slightly damp cloth. Do not use excessive moisture or spray cleaners directly onto the device.

6. Поиск Неисправностей

If you encounter issues with your COMTEC ZDR043, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact COMTEC customer support.

7. Технические характеристики

8. Гарантия и поддержка

The COMTEC ZDR043 main unit comes with a 3-летняя гарантия производителя from the date of purchase. The HDROP-15 direct wiring cord and other accessories typically carry a 1-летняя гарантия производителя. Сохраните чек о покупке для предъявления гарантийных претензий.

For technical support, troubleshooting assistance, or warranty inquiries, please contact COMTEC customer service through their official webсайт или контактную информацию, указанную на упаковке вашего продукта.

COMTEC Official Webсайт: www.comtec.co.jp