oneisall Blowing Horse for BM1 Dog Grooming Vacuum Blow Dryer and Clippers Instruction Manual

1. Введение

Thank you for choosing the oneisall Blowing Horse attachment for your BM1 Dog Grooming Vacuum Blow Dryer and Clippers. This accessory is designed to provide efficient and gentle air blowing for drying your pet's fur or removing loose hair after grooming. Please read this manual carefully before use to ensure proper operation and maintenance.

2. Содержимое упаковки

В комплект входит следующий предмет:

• 1 x oneisall Blowing Horse Attachment

Note: This product is an accessory and requires the oneisall BM1 Dog Grooming Vacuum Blow Dryer and Clippers for full functionality.

3. Настройка

3.1 Attaching the Blowing Horse

1. Ensure the oneisall BM1 grooming vacuum is turned off and unplugged.
2. Locate the hose connection port on the main BM1 unit.
3. Align the base of the Blowing Horse attachment with the end of the grooming vacuum's hose.
4. Push the Blowing Horse firmly onto the hose until it clicks securely into place. Ensure a snug fit to prevent air leakage.

Изображение 1: The oneisall Blowing Horse attachment shown correctly connected to the hose of the main grooming vacuum unit. The image is labeled "Fit" to indicate proper assembly.

Изображение 2: Various other oneisall grooming attachments are displayed, with a clear indication that they are "Not Fit" for the specific connection point of the Blowing Horse, emphasizing the correct attachment shown in Image 1.

4. Инструкция по эксплуатации

4.1 Using the Blowing Horse

1. After attaching the Blowing Horse, plug in the main oneisall BM1 grooming vacuum unit.
2. Turn on the main unit and select the desired blower speed (low, medium, or high) and temperature setting.
3. Direct the airflow from the Blowing Horse towards your pet's fur to dry them or to gently blow away loose hair and debris.
4. Move the attachment smoothly over your pet's body, ensuring even drying or hair removal.
5. Always monitor your pet's comfort level during use.

4.2 Official Product Video: oneisall low-noise cat grooming vacuum kit

Видео 1: This video demonstrates the oneisall grooming vacuum kit, including various attachments and its low-noise operation. While featuring a cat, the principles of operation for the blower function are applicable to dogs and illustrate the overall system's use.

5. Техническое обслуживание

5.1 Cleaning the Blowing Horse

1. Ensure the main unit is turned off and unplugged before cleaning.
2. Detach the Blowing Horse from the hose.
3. Wipe the exterior of the attachment with a soft, damp ткань.
4. Ensure the attachment is completely dry before reattaching or storing.

6. Поиск Неисправностей

• No airflow from attachment: Ensure the Blowing Horse is securely attached to the hose and the main BM1 unit is powered on and set to a blower speed.
• Слабый воздушный поток: Check for any blockages in the attachment or the hose. Ensure the main unit's filter is clean and not clogged with hair.
• Attachment detaches during use: Verify that the attachment was pushed firmly onto the hose until it clicked into place.

7. Технические характеристики

• Тип продукта: Blowing Horse Attachment
• Совместимость: oneisall BM1 Dog Grooming Vacuum Blow Dryer and Clippers (B0C23PD2X3)
• Материал: Пластик, Резина
• Цвет: Белый/Серый

8. Гарантия и поддержка

The oneisall BM1 Dog Grooming Vacuum and its accessories are backed by a Гарантия 2 год. For any questions, technical assistance, or warranty claims, please contact oneisall customer support. We offer Круглосуточная поддержка чтобы обеспечить ваше удовлетворение.

Для получения более подробной информации посетите официальный сайт oneisall Store.