AIRDOCTOR 2000i SMART Air Purifier User Manual

1. Введение

This manual provides instructions for the safe and efficient use of your AIRDOCTOR 2000i SMART Air Purifier. Please read all instructions carefully before operating the device and retain this manual for future reference.

The AIRDOCTOR 2000i SMART Air Purifier is designed to improve indoor air quality in small to medium-sized rooms. It features a 3-stage filtration system, including a Pre-Filter, UltraHEPA filter, and Carbon/VOC filter, to capture various airborne particles and odors. The smart capabilities allow for remote control and real-time air quality monitoring via a dedicated mobile application.

Figure 1: AIRDOCTOR 2000i SMART Air Purifier unit.

2. Настройка

2.1 Распаковка

1. Осторожно извлеките очиститель воздуха из упаковки.
2. Remove all packaging materials, including any protective films or inserts.
3. Осмотрите устройство на предмет наличия повреждений. Если устройство повреждено, не используйте его и обратитесь в службу поддержки клиентов.

2.2 Размещение

Place the air purifier on a firm, level surface. Ensure there is at least 6 inches (15 cm) of clear space around all sides of the unit for optimal airflow. The AIRDOCTOR 2000i is suitable for small rooms, medium/small bedrooms, nurseries, and home offices, effectively circulating air in 305 sq. ft. 4 times per hour or 610 sq. ft. 2 times per hour.

Рисунок 2: Example of air purifier placement in a room, showing size relative to a person and other models.

2.3 Установка фильтра

The AIRDOCTOR 2000i uses a 3-stage filtration system. Ensure all filters are correctly installed before first use. Filters may come pre-installed but require removal of protective packaging.

1. Locate the filter compartment cover, typically on the side or back of the unit.
2. Open the cover and remove any plastic wrapping from the Pre-Filter, UltraHEPA filter, and Carbon/VOC filter.
3. Insert the filters in the correct order as indicated inside the unit or in the diagram below. The Pre-Filter typically goes first, followed by the Carbon/VOC filter, and then the UltraHEPA filter.
4. Плотно закройте крышку отсека фильтра.

Figure 3: Advanced 3-stage filtration system components: Pre-Filter, UltraHEPA filter, and Carbon/Gas Trap/VOC filter.

Рисунок 4: Подробная информация view из 3-хtage filtration system and its components: 1. Cleanable Pre-Filter, 2. Dual-Action Carbon/Gas Trap/VOC Filter, 3. UltraHEPA Filter, 4. Whisper-Jet Fans.

2.4 Подключение питания

Вставьте шнур питания в стандартную электрическую розетку. Устройство перейдет в режим ожидания.

2.5 App Setup (Smart Capabilities)

To utilize the smart features of your AIRDOCTOR 2000i, download the official AIRDOCTOR app on your smartphone or tablet. The app allows for remote control, real-time air quality monitoring, and filter life notifications.

1. Download the "AIRDOCTOR" app from your device's app store.
2. Follow the in-app instructions to create an account and connect your AIRDOCTOR 2000i unit to your Wi-Fi network.
3. После подключения вы можете view air quality alerts, control fan speeds, set timers, and monitor filter life from anywhere.

Figure 5: Screenshots demonstrating the AirDoctor app's features, including air quality alerts, filter change notifications, and control options.

Figure 6: The Air Quality Dashboard within the app displays temperature, humidity, AQI, particle counts, ozone, and pollen levels.

Figure 7: The app allows users to control the unit, adjust fan speed, set timers, and track filter life remotely.

3. Операция

3.1 Панель управления оконченаview

The AIRDOCTOR 2000i features an intuitive control panel on the top of the unit. Refer to the diagram below for button functions.

Рисунок 8: Болееview панели управления с различными функциональными кнопками.

3.2 Включение/выключение питания

Press the Power button (usually indicated by a circle icon) to turn the unit on or off.

3.3 Регулировка скорости вентилятора

The unit offers 6 fan speeds. Press the Speed button to cycle through the available settings, from quiet to boost. Higher speeds provide faster air purification.

3.4 Автоматический режим и индикатор качества воздуха

Engage Auto Mode by pressing the Auto button. In this mode, the air purifier automatically adjusts its fan speed based on the detected indoor air quality. The unit features a real-time air quality monitor indicated by colored rings:

• Синий: Good Air Quality (Low Speed)
• Желтый/Оранжевый: Moderate Air Quality (Medium Speed)
• Красный: Poor Air Quality (Maximum Speed)

Figure 9: The air quality indicator light changes color to reflect current air quality, influencing fan speed in Auto Mode.

Figure 10: Visual representation of the air quality indicator colors and corresponding fan speeds.

3.5 Функция таймера

Use the Timer button to set the unit to operate for a specific duration before automatically turning off.

3.6 Подключение по Wi-Fi

The Wi-Fi indicator light shows the connection status to your home network. Refer to section 2.5 for app setup.

3.7 Видео завершеноview

For a visual guide on the features and operation of your AIRDOCTOR 2000i, please watch the following video:

4. Техническое обслуживание

Regular maintenance ensures optimal performance and extends the lifespan of your AIRDOCTOR 2000i. Always unplug the unit before performing any maintenance.

4.1 Замена фильтра

The AIRDOCTOR 2000i uses long-lasting genuine filters. The app will notify you when it's time to replace them. Generally, filters should be replaced every 6-12 months, depending on usage and air quality.

1. Отключите очиститель воздуха от розетки.
2. Откройте крышку отсека фильтра.
3. Снимите старые фильтры. Утилизируйте их в соответствии с местными правилами.
4. Insert new genuine AIRDOCTOR replacement filters in the correct order (Pre-Filter, Carbon/VOC, UltraHEPA).
5. Плотно закройте крышку отсека фильтра.
6. Plug the unit back in. Reset the filter life indicator if applicable (refer to app or control panel instructions).

Genuine AIRDOCTOR brand replacement filters are recommended to ensure tested performance standards. You can shop for replacement filters directly through the AIRDOCTOR app.

Figure 11: The AirDoctor app provides filter life tracking and direct purchasing options for replacement filters.

4.2 Очистка предварительного фильтра

The Pre-Filter is cleanable and designed to capture larger contaminants like dust and animal hair. Periodically inspect and clean the Pre-Filter to maintain efficiency. This can often be done by vacuuming the filter or gently rinsing it with water (ensure it is completely dry before reinstallation).

Note: Only the Pre-Filter is cleanable. The UltraHEPA and Carbon/VOC filters are not washable and must be replaced.

5. Поиск Неисправностей

If you encounter issues with your AIRDOCTOR 2000i, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact AIRDOCTOR customer support.

6. Технические характеристики

Figure 12: Dimensions of the AIRDOCTOR 2000i unit, highlighting its compact size and recessed handles for portability.

7. Гарантия и поддержка

7.1 Информация о гарантии

Every AIRDOCTOR product is backed by a 30-Day Breathe Easy Guarantee. This allows you to try the AIRDOCTOR in your home risk-free for 30 days. For detailed warranty terms and conditions, please refer to the official AIRDOCTOR webсайт или обратитесь в службу поддержки клиентов.

Figure 13: Information regarding the 30-Day Breathe Easy Guarantee.

7.2 Поддержка клиентов

For any questions, technical assistance, or warranty claims, please contact AIRDOCTOR customer support. Contact information can typically be found on the official AIRDOCTOR webна сайте или внутри упаковки продукта.

When contacting support, please have your model number (AD2000) and purchase information readily available.