Lian Li Lancool 216 Mid-Tower PC Case Instruction Manual (Non-RGB)

1. Настройка

1.1 Распаковка и первоначальный осмотр

Carefully remove the Lian Li Lancool 216 PC case from its packaging. Inspect the case for any signs of damage during transit. Ensure all accessories, including screws and mounting hardware, are present.

1.2 Снятие панели

The Lancool 216 is designed for easy access to internal components. Most panels can be removed without tools.

• Боковые панели: Gently pull the tempered glass side panel to detach it. The solid side panel can also be removed by pulling it away from the chassis.
• Верхняя панель: The top panel, featuring a fine mesh, can be easily lifted off for access to the top fan/radiator mounts.
• Передняя панель: The front mesh panel is designed for optimal airflow and can be detached for cleaning or fan installation.

Рисунок 1: Внутренний view of the Lian Li Lancool 216 case, showing the spacious interior and cable routing options.

Figure 2: The removable top radiator bracket for easier installation of cooling solutions.

1.3 Установка материнской платы

The Lancool 216 supports E-ATX (under 280mm), ATX, Micro-ATX, and Mini-ITX motherboards. Install standoffs as required for your motherboard size. Secure the motherboard with screws.

Figure 3: The adjustable motherboard tray allows for configurations optimized for either air or water cooling.

1.4 Установка вентилятора и радиатора

The case comes with dual front 160mm PWM fans and one rear 140mm PWM fan. Additional fans and radiators can be installed:

• Передний: Supports 3 x 120mm, 2 x 140mm, or 2 x 160mm fans. Radiator support up to 360mm.
• Вершина: Supports 3 x 120mm or 2 x 140mm fans. Radiator support up to 360mm. The top mounting bracket is removable for ease of installation.
• Bottom (PSU Cover): Supports 2 x 120mm or 2 x 140mm fans (Air Cooling mode). Radiator support up to 240mm.
• Задний: Поддерживает установку одного вентилятора размером 120 мм или одного вентилятора размером 140 мм.
• PCIe Fan Bracket: Поддерживает 1 вентилятор размером 120 мм.

Figure 4: The fine mesh front panel ensures maximum airflow for optimal cooling performance.

1.5 Установка привода

The Lancool 216 offers multiple drive mounting options:

• Drive Cage: 2 x 2.5” SSD + 2 x 3.5” HDD.
• Крышка блока питания: 2 x 2.5” SSD.
• Behind MB Tray: 2 x 2.5” SSD.

1.6 Установка графического процессора

The case supports GPUs up to 392mm in length. It features a rotatable PCIe expansion slot panel, allowing for both standard horizontal and vertical GPU mounting (riser cable sold separately).

Рисунок 5: Сзади view showing the rotatable PCIe slots, enabling vertical GPU mounting.

1.7 Управление кабелями

The Lancool 216 is designed with cable management in mind. Utilize the three Velcro straps behind the motherboard tray and two additional straps above the PSU chamber to bundle and route cables neatly. This helps maintain optimal airflow and a clean build appearance.

Figure 6: Integrated Velcro straps and routing channels for efficient cable management.

2. Операционная

2.1 Включение/выключение питания

Press the Power Button located on the front I/O panel to turn the PC on or off. A Reset Button is also available for system restarts.

2.2 Использование передних портов ввода/вывода

Передняя панель ввода/вывода обеспечивает удобный доступ к:

• 2 x USB 3.0 ports for high-speed data transfer.
• 1 x USB Type-C port for modern connectivity.
• 1 x Audio jack for headphones or microphones.

2.3 Управление вентилятором

The pre-installed PWM fans can be controlled via your motherboard's fan headers and BIOS/software settings. Refer to your motherboard manual for detailed fan control instructions.

3. Техническое обслуживание

3.1 Очистка пылевого фильтра

The Lancool 216 includes a bottom dust filter. Regularly remove and clean this filter to maintain optimal airflow and prevent dust buildup inside the case. The front and top mesh panels can also be cleaned with compressed air or a soft brush.

3.2 Генеральная уборка

Для наружных работ используйте мягкую, твердую ткань.amp cloth to wipe down surfaces. Avoid abrasive cleaners. For the interior, use compressed air to remove dust from components and internal surfaces.

4. Поиск Неисправностей

4.1 Нет питания

Ensure all power cables are securely connected to the power supply, motherboard, and components. Verify that the power supply unit (PSU) switch is in the 'ON' position.

4.2 Вентиляторы не вращаются

Check that all fan cables are correctly connected to the motherboard's fan headers. Ensure fan control settings in the BIOS or software are configured correctly.

4.3 Перегрев

Verify that all fans are spinning and oriented correctly for optimal airflow (front/bottom intake, rear/top exhaust). Clean all dust filters and ensure no cables are obstructing airflow. Check thermal paste application on CPU cooler.

5. Технические характеристики

Figure 7: Detailed dimensions of the Lancool 216 chassis.

6. Гарантия и поддержка

6.1 Информация о гарантии

Lian Li products typically come with a manufacturer's warranty covering defects in materials and workmanship. Please retain your proof of purchase for warranty claims. Specific warranty duration and terms may vary by region and product. Refer to the official Lian Li webсайт для получения самой актуальной информации о гарантийной политике.

6.2 Техническая поддержка

For technical assistance, troubleshooting, or any questions regarding your Lian Li Lancool 216 PC case, please visit the official Lian Li support website or contact their customer service department. You may find FAQs, driver downloads, and contact information for your region.