Lian Li Strimer Plus V2 24-Pin Addressable RGB Power Extension Cable (PW24-PV2) User Manual

Введение

The Lian Li Strimer Plus V2 24-Pin Addressable RGB Power Extension Cable (PW24-PV2) is designed to enhance your PC build with vibrant, customizable lighting. This non-wireless extension cable connects to your motherboard and is controlled via the included wired controller, which is compatible with Lian Li's L-Connect 3 software. Featuring 120 LEDs and 18 lighting modes, it offers extensive aesthetic customization for your system.

Информация по безопасности

• Ensure your power supply unit (PSU) is turned off and unplugged from the wall outlet before installation.
• Handle components with care to avoid damage from electrostatic discharge. Consider using an anti-static wrist strap.
• Do not force connectors. Align them correctly before applying gentle pressure.
• Храните изделие вдали от жидкостей и экстремальных температур.
• This product is intended for use inside a personal computer case.

Инструкции по установке

Содержимое упаковки

• Lian Li Strimer Plus V2 24-Pin Extension Cable
• Wired Controller for L-Connect 3 (PW24PV2-1)
• Cable clips and accessories

Image: All components included with the Lian Li Strimer Plus V2 24-Pin cable, including the extension cable, wired controller, and cable clips.

Этапы установки

1. Подготовьте свой компьютер: Turn off your computer and unplug the power cable from the wall outlet. Open your PC case.
2. Disconnect existing 24-pin cable: Locate the existing 24-pin ATX power cable connected from your PSU to your motherboard. Carefully disconnect it.
3. Connect Strimer Plus V2 to PSU: Connect the female end of the Strimer Plus V2 24-Pin extension cable to the 24-pin ATX power cable coming from your PSU. Ensure a secure connection.
4. Connect Strimer Plus V2 to Motherboard: Connect the male end of the Strimer Plus V2 24-Pin extension cable to the 24-pin ATX power header on your motherboard.
5. Подключите контроллер: Connect the wired controller (PW24PV2-1) to the Strimer Plus V2 cable. The controller typically requires a SATA power connection from your PSU and a USB 2.0 header connection on your motherboard for L-Connect 3 software control. Refer to the controller's specific instructions for detailed wiring.
6. Управление кабелями: Use the included cable clips to shape and route the Strimer Plus V2 cable for optimal aesthetics and airflow within your case. The cable is designed to be flexible for various routing options.

Изображение: крупный план view of the Lian Li Strimer Plus V2 24-Pin cable connected to a motherboard, showing the flexible design.

Image: The wired controller for the Lian Li Strimer Plus V2, used for connecting to the L-Connect 3 software.

Инструкция по эксплуатации

L-Connect 3 Software Control

The Lian Li Strimer Plus V2 24-Pin cable is controlled via the L-Connect 3 software. Ensure the wired controller is properly connected to a USB 2.0 header on your motherboard and a SATA power connector from your PSU.

• Download and install the latest version of L-Connect 3 software from the official Lian Li webсайт.
• Launch L-Connect 3. The software should detect the Strimer Plus V2 controller.
• Navigate to the 'Strimer Plus Lighting' section within the software.
• Select from 18 pre-set lighting modes or customize individual LED effects.
• Adjust brightness, speed, and color palettes to match your PC's aesthetic.

Image: Screenshot of the L-Connect 3 software interface, showing options for controlling Strimer Plus V2 lighting modes and colors.

Lighting Modes and Customization

The Strimer Plus V2 features 120 addressable LEDs, offering a wide range of lighting effects. The L-Connect 3 software allows for granular control over these LEDs, enabling users to create unique lighting patterns and synchronize them with other Lian Li RGB components.

Image: The Lian Li Strimer Plus V2 24-Pin cable illuminated with a vibrant rainbow RGB effect.

Image: The Strimer Plus V2 cable elegantly curved within a PC case, showcasing its flexible design and dynamic RGB lighting.

Image: The Strimer Plus V2 cable displaying a warm orange lighting effect, integrated into a PC build.

Обслуживание

• Уборка: Use a soft, dry, anti-static cloth to gently wipe the cable and controller. Do not use liquid cleaners or abrasive materials.
• Целостность кабеля: Periodically inspect the cable for any signs of wear, fraying, or damage. Ensure all connections remain secure.
• Обновления программного обеспечения: Keep your L-Connect 3 software updated to ensure optimal performance and access to new features or bug fixes.

Поиск неисправностей

• RGB не горит:
  • Check all cable connections, especially the SATA power and USB 2.0 header connections to the controller.
  • Ensure the L-Connect 3 software is running and the controller is detected.
  • Verify that your motherboard's USB 2.0 header is functional.
• Неправильные цвета или эффекты:
  • Ensure the correct device is selected in the L-Connect 3 software.
  • Попробуйте перезагрузить Lighting Pro.file в программном обеспечении.
  • Update L-Connect 3 to the latest version.
• Controller not detected by L-Connect 3:
  • Re-seat the USB 2.0 header cable on both the controller and the motherboard.
  • Try connecting the controller to a different USB 2.0 header if available.
  • Ensure the SATA power cable to the controller is securely connected.

Технические характеристики

Информация о гарантии

The Lian Li Strimer Plus V2 24-Pin Addressable RGB Power Extension Cable (PW24-PV2) comes with a Гарантия 1 год from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official Lian Li webсайт или обратитесь в службу поддержки клиентов.

Поддерживать

For further assistance, technical support, or to download the latest L-Connect 3 software and drivers, please visit the official Lian Li webсайт:

www.lian-li.com

You may also refer to the FAQ section on the webСайт для часто задаваемых вопросов и поиска решений.