MOES Touch Wall Single Live Wire Smart Switch User Manual

1. Введение

This manual provides detailed instructions for the installation, setup, operation, and troubleshooting of your MOES Touch Wall Single Live Wire Smart Switch. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

Image: MOES Touch Wall Single Live Wire Smart Switch and its retail packaging.

2 Важная информация по безопасности

WARNING: Risk of Electric Shock. Installation should only be performed by a qualified electrician or a person with a thorough understanding of electrical wiring.

• Перед установкой или обслуживанием выключателя всегда отключайте питание на автоматическом выключателе.
• This switch is designed for single pole circuits only. It is not compatible with 3-way switches.
• Ватtagе подключенного лamp must be greater than 5W for proper operation.
• Only supports 2.4 GHz Wi-Fi networks. 5 GHz networks are not supported.
• Install the included capacitor to ensure proper functionality, especially in no-neutral wire setups.
• Не устанавливать в damp среды.
• Не превышайте максимальную нагрузку, указанную в технических характеристиках изделия.
• Use English letters and numbers when naming your Wi-Fi router to ensure the Smart Device recognizes it.

Image: Key attention points for installation and compatibility.

3. Технические характеристики

4. Руководство по установке

4.1 Tools Used

The following tools are typically used for installation:

• Для зачистки проводов
• Изолента
• Клемма для проводки
• Electric pen (voltag(e тестер)

Image: Essential tools for smart switch installation.

4.2 Этапы установки

1. Выключите питание: Locate your circuit breaker panel and turn off the circuit breaker controlling the light switch you intend to replace. Verify power is off using an electric pen or voltagе тестер.
2. Удалить старый переключатель: Carefully remove the faceplate and mounting screws of the existing switch. Gently pull the old switch out from the wall box.
3. Определите провода: Identify the Live wire (L) and the Lamp wire(s) (L1, L2, L3) connected to your existing switch. This switch does not require a Neutral wire at the switch box.
4. Подключите новый коммутатор: Connect the Live wire to the 'L' terminal on the MOES Smart Switch. Connect the Lamp wire(s) to the corresponding 'L1', 'L2', 'L3' terminals. Ensure all connections are secure.
5. Установите конденсатор: The capacitor must be wired to the L1 position (lamp wire 1) at the light fixture. Connect one end of the capacitor to the neutral wire of the lamp and the other end to the lamp wire connected to L1. This is crucial for stable operation in no-neutral wire systems. If the lighting bulb still flickers, check the load power of the bulb or consider if another capacitor is required for wiring together.
6. Крепление переключателя: Carefully push the wired smart switch back into the wall box. Secure it with the provided screws. Attach the new faceplate.
7. Восстановить мощность: Включите автоматический выключатель снова.

Image: Detailed wiring diagram for the smart switch, including capacitor installation.

Изображение: Бывшийamples of horizontal and vertical installation to suit different styles.

4.3 Видеоруководство по установке

Video: A comprehensive guide to installing the single live wire smart switch.

5. Настройка и сопряжение

5.1 Установка приложения

Download the 'Smart Life' or 'Tuya Smart' app from your mobile device's app store (Google Play Store for Android, Apple App Store for iOS).

5.2 Сопряжение по Wi-Fi

Open the app and follow the on-screen instructions to add a new device. Ensure your phone is connected to a 2.4 GHz Wi-Fi network. The switch will enter pairing mode when powered on for the first time or after a reset.

5.3 Resetting Wi-Fi Code

To reset the Wi-Fi code and enter pairing mode:

1. Press the switch button for 6 times.
2. Hold on the 6th time.
3. Release until you hear