Stabilus 4B-028513

Stabilus Tailgate Lift Support User Manual

Модель: 4B-028513

1. Введение

This manual provides essential information for the proper installation, operation, and maintenance of your Stabilus Tailgate Lift Support. Please read this manual thoroughly before installation to ensure safe and effective use of the product. This product is designed to provide reliable support and controlled motion for vehicle tailgates, hoods, or trunks.

2. Продукт закончилсяview

The Stabilus Tailgate Lift Support is a high-quality gas strut designed for automotive applications. It ensures the original opening and closing control of your vehicle's hood, hatch, or trunk. Manufactured to original equipment specifications, this lift support provides consistent performance and durability.

Stabilus Tailgate Lift Support, single unit

Figure 2.1: Stabilus Tailgate Lift Support. This image shows the complete lift support unit, a black cylindrical body with a thin rod extending from one end, terminating in a mounting point.

Stabilus Tailgate Lift Support with detailed end views

Рисунок 2.2: Подробная информация view of Stabilus Lift Support ends. This image highlights the mounting points at both ends of the lift support, showing the specific connection mechanisms.

Stabilus Gas Springs durability in various weather conditions

Figure 2.3: Illustration of Stabilus Gas Spring durability. This image depicts the product's resilience against various weather conditions, including snow, rain, and sunshine, emphasizing its robust sealing package designed to keep out moisture and debris.

Stabilus Lift-O-Mat gas spring installed in a car trunk

Figure 2.4: Stabilus Lift-O-Mat in application. This image shows the lift support installed in a vehicle's trunk, demonstrating its compact size and how it assists in smooth opening and closing motions.

3. Технические характеристики

АтрибутЦенить
БрендСтабилус
МодельLIFT-O-MAT®
Номер модели товара4Б-028513
Номер детали производителя4Б-028513
Номера взаимозаменяемых деталейSG314001, 4600
Увеличенная длина19.67 дюймов
Сила625 Н
Вес товара4.8 унции
Размеры продукта19.65 x 1.5 x 1 дюйма
ЦветЧерный
Особые возможностиOE Quality
СКП194879005782, 194879027265

4. Совместимость

This Stabilus lift support is compatible with a range of vehicle models. Please verify your vehicle's specific requirements against the following list:

  • 1977 - 1977, AMERICAN MOTORS HORNET
  • 1976 - 1977, DODGE ASPEN
  • 1984 - 1990, FORD BRONCO II
  • 1978 - 1981, FORD FAIRMONT
  • 1982 - 1982, FORD GRANADA
  • 1983 - 1986, FORD LTD
  • 1984 - 1993, FORD MUSTANG
  • 1983 - 1986, MERCURY CAPRI
  • 1982 - 1982, MERCURY COUGAR
  • 1983 - 1986, MERCURY MARQUIS
  • 1978 - 1981, MERCURY ZEPHYR
  • 1976 - 1977, PLYMOUTH VOLARE

It is crucial to confirm the part number and specifications match your vehicle's existing lift support before installation.

5. Настройка и установка

Installation of lift supports typically involves a few common steps. Always refer to your vehicle's specific service manual for detailed instructions and safety precautions. Professional installation is recommended if you are unsure about any steps.

5.1 Меры предосторожности

  • Ensure the tailgate, hood, or trunk is securely supported before removing old lift supports. Use a prop rod or have another person hold it.
  • Используйте соответствующие средства индивидуальной защиты, включая защитные очки и перчатки.
  • Do not compress or extend the new lift support manually with excessive force before installation, as this can damage the internal components.
  • Avoid puncturing or heating the lift support, as it contains pressurized gas.

5.2 Этапы установки (общие)

  1. Закрепите крышку: Open the tailgate, hood, or trunk and secure it in the fully open position using a suitable prop or assistance.
  2. Locate Old Support: Identify the existing lift support. Note its orientation and how it is attached at both ends.
  3. Remove Old Support: Depending on the attachment type (e.g., ball sockets, clips), use a small flat-head screwdriver or a specific tool to release the clips or pry off the old support from its mounting points. Remove one end at a time.
  4. Install New Support: Align the new Stabilus lift support with the mounting points. For ball sockets, simply push the new support onto the ball studs until it clicks into place. Ensure a secure connection at both ends.
  5. Тестовая функциональность: Carefully remove the prop and slowly close and open the tailgate, hood, or trunk to ensure the new lift support operates smoothly and holds the lid securely in the open position.

If the lift support does not install easily or function correctly, re-check the part number for compatibility and ensure all safety steps were followed.

6. Инструкция по эксплуатации

The Stabilus lift support operates automatically to assist in opening and holding open your vehicle's tailgate, hood, or trunk. No specific user operation is required beyond the normal opening and closing of the vehicle component it supports.

  • Открытие: When opening the supported component, the lift support will extend smoothly, assisting the lift and holding it in the fully open position.
  • Закрытие: When closing, apply gentle downward pressure. The lift support will retract in a controlled manner, preventing sudden drops.

Do not force the component open or closed against the natural resistance of the lift support, as this can cause damage to the support or the vehicle's hinges.

7. Техническое обслуживание

Stabilus lift supports are designed for long-term, maintenance-free operation. However, periodic inspection can help ensure continued performance.

  • Визуальный осмотр: Periodically check the lift supports for any signs of damage, such as bending, dents, or leaks around the seals.
  • Точки крепления: Ensure the mounting points are clean and free of corrosion. The connections should be secure and free from excessive play.
  • Уборка: If necessary, wipe the exterior of the lift support with a clean, damp ткань. Избегайте использования агрессивных химикатов или абразивных чистящих средств.
  • Смазка: No lubrication is required for the internal components. Do not attempt to lubricate the rod or seals.

If any issues are observed, consider replacing the lift support to maintain proper functionality and safety.

8. Поиск Неисправностей

This section addresses common issues you might encounter with your lift support.

ПроблемаВозможная причинаРешение
Крышка не остается открытой или опускается медленно.Worn out or faulty lift support.Replace the lift support. It is recommended to replace both supports if your vehicle uses two, even if only one appears faulty.
Крышку трудно закрыть.Incorrect lift support force (too strong) or binding hinges.Verify the part number and force rating for your specific vehicle. Check hinges for obstruction or damage.
Скрип или скрежет во время работы.Corrosion or wear at mounting points; internal damage.Inspect mounting points for rust or debris and clean if necessary. If noise persists, replace the lift support.
Lift support appears bent or damaged.Physical impact or improper installation.Replace the damaged lift support immediately.

9. Гарантия и поддержка

Stabilus products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation provided with your purchase or contact Stabilus customer support directly. Keep your proof of purchase for any warranty claims.

For technical assistance or further inquiries, please visit the official Stabilus webсайте или обратитесь в их отдел обслуживания клиентов.

© 2024 Stabilus. All rights reserved.

This manual is for informational purposes only. Stabilus is not responsible for any damage or injury resulting from improper installation or use.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.