Shurflo 4008-101-A65/E65

Shurflo 12 Volt RV Water Pump 3.0 GPM - Model 4008-101-A65/E65 Instruction Manual

For Models: 4008-101-A65, 4008-101-E65

1. Продукт закончилсяview

The Shurflo 12 Volt RV Water Pump, Model 4008-101-A65/E65, is designed to provide reliable fresh water delivery in recreational vehicles and campers. Featuring a unique one-piece diaphragm and internal bypass, this pump ensures long life and consistent performance. It is engineered for high flow demand, quiet operation, and is thermally protected, allowing it to run dry without damage. The pump includes a built-in check valve and can be mounted in any position.

Shurflo 12 Volt RV Water Pump, side view

Изображение 1.1: Сторона view of the Shurflo 12 Volt RV Water Pump, showing its compact design and electrical connections.

2. Информация по технике безопасности

Внимательно прочтите все инструкции перед установкой и эксплуатацией. Несоблюдение этих инструкций может привести к повреждению имущества, травмам или смерти.

  • Always disconnect power to the pump before performing any installation, maintenance, or troubleshooting.
  • Ensure proper electrical wiring and connections are made according to local codes and manufacturer specifications.
  • Do not pump flammable liquids. This pump is designed for fresh water only.
  • Во время установки и обслуживания используйте соответствующие средства индивидуальной защиты (СИЗ).
  • It is highly recommended that a trained and licensed technician installs this item.

3. Содержимое упаковки

Проверьте наличие всех предметов в посылке:

  • Shurflo 12 Volt RV Water Pump (Model 4008-101-A65/E65)
  • Twist-On Optional Pipe Strainer (Model 255-213)
  • Крепежные винты
  • 2 Blue Caps (for quality control testing water leakage prevention)

4. Технические характеристики продукта

ОсобенностьСпецификация
БрендШурфло
Номер модели4008-101-A65/E65
Томtage12 Вольта постоянного тока
Максимальная скорость потока3 галлона в минуту (11.4 л/мин)
Давление отключения55 фунтов на квадратный дюйм (3.1 бар)
Ampс (макс.)7.5 Amps
МатериалПластик
Размеры продукта (Д x Ш x В)7.28 x 10.08 x 5.59 дюйма (18.5 x 25.6 x 14.2 см)
Вес товара100 грамм (0.22 фунта)
ФункцииSelf-Priming, Internal Bypass, Low Cycling, Quiet Operation, Runs Dry Without Damage, Thermally Protected, Built-In Check Valve
Shurflo 12 Volt RV Water Pump, top view с этикеткой

Изображение 4.1: Вершина view of the Shurflo water pump, displaying the model number and electrical specifications on the label.

5. Установка

Follow these steps for proper installation of your Shurflo RV Water Pump:

  1. Подготовка: Ensure the RV's main power is disconnected. Locate a suitable mounting area for the pump, preferably on a solid, flat surface, away from heat sources and direct sunlight. The pump can be mounted in any position.
  2. Монтаж: Secure the pump to the chosen surface using the provided mounting screws. The pump has four mounting feet for stability.
  3. Электрические соединения: Connect the pump's two wires to the RV's 12 Volt DC power supply. Typically, the red wire connects to the positive (+) terminal and the black wire to the negative (-) or ground terminal. Ensure connections are secure and insulated. It is recommended to use appropriate wire connectors.
  4. Подключения к водопроводу:
    • Identify the inlet and outlet ports on the pump. The inlet typically connects to the fresh water tank, and the outlet connects to the RV's plumbing system.
    • Attach the water lines to the pump's ports. The pump features thumb screws for easy connection. Hand-tighten these connections to prevent leaks.
    • Install the optional twist-on pipe strainer (Model 255-213) on the inlet side of the pump. This helps filter out debris and protect the pump.
  5. Окончательные проверки: Double-check all electrical and plumbing connections for tightness and security.
Shurflo 12 Volt RV Water Pump, bottom view

Изображение 5.1: Нижний view of the Shurflo water pump, showing the mounting feet and port locations.

Видео 5.2: A video demonstrating the simple installation process of the Shurflo 12 Volt RV Water Pump, including mounting, wiring, and water line connections.

6. Initial Setup and Priming

After installation, follow these steps to prepare the pump for use:

  1. Наполните резервуар для чистой воды: Ensure your RV's fresh water tank is adequately filled.
  2. Open Faucets: Open all hot and cold water faucets in your RV to allow air to escape the system.
  3. Восстановить мощность: Turn on the 12 Volt DC power supply to the pump.
  4. Заправьте насос: The pump is self-priming. It will begin to run, drawing water from the tank and pushing air out of the system. Allow the pump to run until a steady stream of water flows from all faucets, indicating that the system is primed and air-free.
  5. Проверьте на наличие утечек: Close all faucets and inspect all plumbing connections for any signs of leaks. Tighten connections as necessary.

7. Операция

The Shurflo 12 Volt RV Water Pump operates on an automatic demand system:

  • When a faucet is opened, the pressure in the water system drops, causing the pump to automatically turn on and supply water.
  • When all faucets are closed, the system pressure builds up, and the pump automatically shuts off.
  • The internal bypass design minimizes cycling and ensures quiet operation.
  • The pump is designed to run dry without damage, but it is always best practice to ensure your fresh water tank has water to prevent unnecessary wear.

8. Техническое обслуживание

Regular maintenance ensures the longevity and optimal performance of your water pump:

  1. Очистка фильтра: The included twist-on pipe strainer (Model 255-213) should be inspected and cleaned periodically. Its transparent design allows you to easily see when cleaning is required.
    • Отключите питание насоса.
    • Unscrew the clear bowl of the strainer.
    • Remove and clean the mesh filter screen under running water.
    • Reassemble the strainer, ensuring the O-ring is properly seated to prevent leaks. Hand-tighten the bowl.
  2. Подготовка к зиме: Before freezing temperatures, ensure the pump and entire water system are properly winterized to prevent damage from freezing water. Consult your RV's manual for specific winterization procedures.
  3. Общий осмотр: Periodically check all hoses, connections, and electrical wiring for wear, damage, or leaks. Address any issues promptly.
Shurflo water pump strainer, top view

Изображение 8.1: Вершина view of the Shurflo water pump strainer, showing its transparent bowl for easy inspection.

Shurflo water pump strainer disassembled

Изображение 8.2: Разобранный view of the Shurflo water pump strainer, showing the mesh filter screen and clear bowl for cleaning.

9. Поиск Неисправностей

If you encounter issues with your Shurflo water pump, refer to the following common problems and solutions:

ПроблемаВозможная причинаРешение
Насос не работаетНет питания, перегорел предохранитель, неисправная проводка, неисправный выключательCheck power supply, inspect fuse, tighten connections, test switch
Низкий поток воды или его отсутствиеLow water in tank, clogged strainer, air in system, kinked hose, faulty check valveFill tank, clean strainer, prime system, straighten hose, inspect/replace check valve
Pump runs continuously (cycles rapidly)Water leak in system, open faucet, faulty pressure switch, air in systemCheck for leaks, close all faucets, inspect/replace pressure switch, re-prime system
Шумная работаLoose mounting, air in system, pump cavitation, debris in pump headSecure mounting, re-prime system, ensure adequate water supply, clean pump head

10. Гарантия и поддержка

For warranty information and technical support, please refer to the official Shurflo webили обратитесь в службу поддержки напрямую. Сохраните чек о покупке в качестве подтверждения покупки на случай предъявления гарантийных претензий.

© 2023 Shurflo. All rights reserved. This manual is for informational purposes only.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.