Fiber Optic Fusion Splicer User Manual

1. Введение

This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your QIIRUN 6481B Series Fiber Optic Fusion Splicer. This device is designed for precise optical fiber splicing, offering advanced features for professionals in the telecommunications and fiber optics industry. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Figure 1.1: QIIRUN 6481B Fiber Optic Fusion Splicer

2.Основные характеристики

The QIIRUN 6481B Series Fiber Optic Fusion Splicer incorporates several advanced features to enhance splicing efficiency and accuracy:

• 4 High Precision Motors: Ensures accurate fiber alignment for minimal splicing loss.
• Fast Splicing & Heating: Achieves 7-second splicing and 18-second heating for rapid task completion.
• Ultra-Low Splicing Loss: Delivers an impressive 0.02dB ultra-low splicing loss.
• 5mm Fusion for Ultra-Short Cleave Length: Supports efficient splicing even with very short fiber cleaves.
• 320 Times Image Magnification: Provides clear and detailed fiber views for precise operation.
• Обширное хранилище данных: Stores 300 groups of splice modes, 100 groups of heating modes, and 10,000 groups of fusion records.
• 4.3-дюймовый сенсорный экран: Features a graphical user interface for intuitive and smooth operation.
• All-in-One Fixture: Compatible with various optical fibers, jumpers, and rubber-insulated wires.
• Dual-Directional Fusion Capability: Allows for flexible fiber placement and splicing.
• High Precision Ceramic V-groove and Presser Foot: Ensures convenient and accurate fiber loading, simplifying cleaning and maintenance.
• Intelligent Heat Shrink: The heater activates only when fiber is detected, preventing accidental burns.
• Pluggable Large-Capacity Lithium-Ion Battery: A 6800mAh battery supports up to 220 splicing and heating cycles for extended field work.
• Компактная и прочная конструкция: Water-resistant, dust-resistant, shock-resistant, and high-temperature resistant for reliable performance in various environments.

Figure 2.1: Technical Facts of the Splicer

Figure 2.2: Touch Screen and Battery Features

3. Продукт закончилсяview и компоненты

Familiarize yourself with the main components of the Fiber Optic Fusion Splicer:

Figure 3.1: Main Components of the Splicer

• Электроды: Generate the arc for fiber fusion.
• Ceramic V-groove: Holds the fiber securely in place during splicing.
• Ветрозащитный экран: Protects the splicing area from environmental interference.
• Ceramic Presser Foot: Applies gentle pressure to the fiber for proper alignment.
• 4.3-дюймовый сенсорный HD-экран: Displays operation interface and fiber images.
• Optical Fiber Fixture: Secures various types of optical fibers.
• Key Pad Area: Provides physical buttons for navigation and control.
• Strap Buckles: For attaching a carrying strap.
• SD / USB Ports: For data transfer and external power.
• Нагреватель: For heat shrinking protection sleeves.
• Cooling Tray: For cooling heat-shrunk fibers.

Рисунок 3.2: Подробные характеристики

4. Настройка

Before first use, ensure the splicer is properly set up:

1. Распаковка: Carefully remove all components from the carry case. Verify that all items listed in the packing list are present.
2. Установка аккумулятора: The splicer comes with a pluggable lithium-ion battery. Ensure it is securely inserted into its compartment. The battery is designed for easy removal and replacement.
3. Защитная накладка: The splicer includes a detachable protective pad that enhances its dust and shock resistance. Attach this pad to the bottom of the unit for added durability, especially during field operations.
4. Включение питания: Press the power button to turn on the splicer. The 4.3-inch touch screen will illuminate, displaying the main interface.

5. Инструкция по эксплуатации

Follow these steps for successful fiber optic fusion splicing:

1. Подготовка волокна:
   • Clean the fiber using appropriate cleaning tools (e.g., lint-free wipes and alcohol).
   • Use the miller stripper to remove the fiber coating, exposing the bare fiber.
   • Cleave the fiber using the high-quality fiber cleaver to achieve a precise, clean end face.
2. Fiber Loading:
   • Open the wind shield and the fiber clamps.
   • Carefully place the prepared fibers into the ceramic V-grooves, ensuring they are properly seated. The built-in lighting assists in precise placement.
   • Закрыть волокно clamps and then the wind shield. The splicer will automatically begin alignment.
3. Процесс склейки:
   • The splicer's 4 high-precision motors will align the fibers. Monitor the alignment on the touch screen.
   • Once aligned, the splicer will automatically initiate the fusion process. This typically takes 7 seconds.
   • After fusion, the splicing loss will be displayed on the screen.
4. Термоусадка:
   • Carefully open the wind shield and fiber clamps.
   • Place a protection sleeve over the spliced area.
   • Transfer the fiber with the sleeve to the intelligent heat shrink oven. The heater will activate automatically upon fiber detection.
   • The heating process takes approximately 18 seconds. Once complete, remove the fiber and place it on the cooling tray.

6. Техническое обслуживание

Regular maintenance ensures the longevity and optimal performance of your splicer:

• Cleaning the V-groove and Presser Foot: Regularly clean the ceramic V-groove and presser foot with a cotton swab and alcohol to prevent dust and fiber debris from affecting splicing accuracy.
• Замена электрода: The electrodes have a limited lifespan. Replace them when the splicer indicates or when splicing performance degrades. Spare electrodes are included in the kit.
• Генеральная уборка: Keep the splicer clean and free from dust. Use a soft, dry cloth for external surfaces.
• Уход батареи: Charge the battery regularly, even when not in use, to maintain its health. Store the splicer and battery in a cool, dry place.

Figure 6.1: Ceramic V-groove and Intelligent Heat Shrink

Figure 6.2: Included Accessories and Cleaning Tools

7. Поиск Неисправностей

В этом разделе рассматриваются распространенные проблемы, с которыми вы можете столкнуться, и возможные пути их решения:

8. Технические характеристики

Detailed technical specifications for the QIIRUN 6481B Series Fiber Optic Fusion Splicer:

9. Гарантия и поддержка

For warranty information, technical support, or service inquiries, please refer to the official QIIRUN website or contact their customer service directly. A detailed User Guide (PDF) is also available for download from the product's Amazon listing page for further reference.

Дополнительные ресурсы:

• Официальное руководство пользователя (PDF): Скачать здесь
• QIIRUN Store on Amazon: Посетить магазин