Введение
Thank you for choosing the Philips LED Lamp with Sensor. This energy-efficient LED lamp provides warm white light (2700K) and features integrated motion and daylight sensors for automatic operation. Designed for convenience and energy saving, this lamp is suitable for various indoor applications. Please read this manual carefully before installation and use to ensure proper function and safety.
Image: The Philips LED Lamp with Sensor, showcasing its standard bulb shape and integrated sensor at the top.
Информация по безопасности
При установке или использовании электроприборов всегда соблюдайте основные меры безопасности, чтобы снизить риск возгорания, поражения электрическим током и травм.
- Выключение: Always switch off the power supply at the main circuit breaker before installing or replacing the lamp.
- Только для использования в помещении: Это лamp is designed for indoor use. Do not expose it to water or excessive moisture.
- Правильная база: Убедитесь, что lamp holder is compatible with an E27 base.
- Томtage: Verify that your electrical system's voltage (100-240V, 50Hz) matches the lampтребования.
- Нерегулируемый: Это лamp is not dimmable. Do not use it with dimmer switches.
- Комфорт для глаз: While designed for EyeComfort, avoid prolonged direct eye exposure to the light source.
Содержимое упаковки
В комплект входит:
- 1 x Philips LED Lamp with Sensor (Model 929002058731)
Инструкция по установке
- Выключите питание: Before installation, ensure the power to the light fixture is completely turned off at the main circuit breaker.
- Удалить старый Lamp: Carefully unscrew and remove the existing lamp from the E27 lamp держатель.
- Установить новый Lamp: Screw the Philips LED Lamp with Sensor into the E27 lamp Затяните держатель вручную, не перетягивая.
- Позиционирование: For optimal sensor performance, ensure the sensor at the top of the lamp is not obstructed by the fixture or other objects. The sensor requires a clear line of sight for motion detection and ambient light measurement.
- Восстановить мощность: Turn the power back on at the main circuit breaker. The lamp will perform a brief self-test and then be ready for operation.
Image: The Philips LED Lamp with Sensor, illustrating its dimensions (12.2 cm height, 6.25 cm width) for proper fitting.
Инструкция по эксплуатации
Этот светодиодный светильник Philipsamp is equipped with both a motion sensor and a daylight sensor for automatic control.
- Автоматическое включение/выключение: Лamp will automatically turn on when motion is detected in low light conditions (evening/night). It will turn off after a period of no motion or when sufficient ambient light is present (daytime).
- Датчик дневного света: The integrated daylight sensor detects ambient light levels. The lamp will only activate due to motion when the surrounding light is below a certain threshold (e.g., in the evening or a dark room). It will remain off during daylight hours to save energy.
- Датчик движения: The motion sensor detects movement within its detection range. Once motion is detected in low light, the lamp illuminates. If no further motion is detected, the lamp will turn off after approximately 60 seconds.
- Качество света: Enjoy a comfortable, warm white light at 2700 Kelvin, designed to meet Philips EyeComfort requirements for reduced eye strain.
Image: Product packaging highlighting the motion and daylight sensor features, indicating automatic on/off functionality.
Sensor Functionality Demonstration
Video: This video demonstrates the functionality of an automatic light sensor system, showing how a light turns on in low ambient light conditions and off when it's bright. This illustrates the principle behind the Philips LED Lamp's integrated sensors.
Обслуживание
The Philips LED Lamp with Sensor requires minimal maintenance.
- Уборка: Перед чисткой убедитесь, что питание отключено. Протрите...amp with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the lamp's surface or sensor.
- Площадь датчика: Keep the sensor area at the top of the lamp clean and free from dust or obstructions to ensure optimal performance.
Поиск неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Lamp не включается. |
|
|
| Lamp не выключается. |
|
|
| Sensor sensitivity seems low. |
|
|
Технические характеристики
| Особенность | Деталь |
|---|---|
| Бренд | Филипс |
| Номер модели | 929002058731 |
| Тип света | ВЕЛ |
| Ватtage | 8 Вт |
| Эквивалент лампы накаливания | 60 Вт |
| Lamp База | Е27 |
| Светлый цвет | Теплый белый |
| Цветовая температура | 2700 Кельвинов |
| Световой поток | 806 Люмен |
| Томtage | 100-240 Вольт |
| Частота | 50 Герц |
| Особые возможности | Motion Sensor, Daylight Sensor, Non-Dimmable, EyeComfort |
| Для использования в помещении и на открытом воздухе | В помещении |
| Продолжительность жизни | 15,000 часов |
| Размеры (В x Ш) | 12.2 см х 6.25 см |
| Материал | Пластик |
Гарантия и поддержка
This Philips LED Lamp with Sensor comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the documentation provided with your purchase or visit the official Philips lighting website. If you encounter any issues or require technical assistance, please contact Philips customer support.
Онлайн поддержка: Посещать www.philips.com/support для ответов на часто задаваемые вопросы и вариантов связи.