Набор инструментов для обслуживания дисковых тормозных колодок и суппортов Orion Motor Tech

Введение

This manual provides detailed instructions for the safe and effective use of your Orion Motor Tech Disc Brake Pad and Caliper Service Tool Kit. This 24-piece kit is designed to assist in the maintenance and replacement of disc brake pads and calipers on a wide range of vehicles. Please read all instructions carefully before beginning any work.

Основные характеристики:

• Полный набор из 24 предметов: Includes all necessary components for comprehensive brake service.
• Простота эксплуатации: Designed for straightforward use, simplifying brake pad replacement.
• Универсальная совместимость: Adapters fit a broad spectrum of vehicle makes and models.
• Прочная конструкция: Made from blackened #45 carbon steel for long-lasting performance and corrosion resistance.
• Организованное хранение: Comes with a heavy-duty blow-molded case for secure and convenient storage.

Содержимое упаковки

Your Orion Motor Tech 24-piece Disc Brake Pad and Caliper Service Tool Kit includes the following items, neatly organized within a durable carrying case:

• 2 x Retaining Plates
• 2 x Thrust Bolt Assemblies (Left and Right-Handed)
• 18 x Disc Adapters (various sizes for broad compatibility)
• 2 x Brake Hangers
• 1 x Heavy-Duty Blow-Molded Carry Case
• 1 x пара перчаток

Рисунок 1: The complete Orion Motor Tech 24-piece Disc Brake Pad and Caliper Service Tool Kit, securely stored in its red blow-molded case.

Рисунок 2: Всеобъемлющий view of all 24 components of the brake tool kit, including the various disc adapters, thrust bolt assemblies, and brake hangers.

Инструкции по настройке и эксплуатации

Follow these steps to properly set up and operate the disc brake caliper service tool kit for brake pad replacement:

1. Подготовьте инструмент: Attach one of the retaining plates to the threaded thrust bolt assembly. Ensure it is securely seated.
2. Выберите правильный адаптер: Identify the appropriate disc adapter that matches the piston face of your vehicle's brake caliper. The kit includes 18 different adapters for various applications.
3. Присоедините адаптер: Place the selected adapter onto the pegs of the retaining plate. The embedded magnets in the thrust bolt assembly will help hold the adapter in place.
4. Расположите инструмент: Carefully position the assembled tool onto the brake caliper piston. Ensure the adapter is flush against the piston face.
5. Compress the Piston: Rotate the T-handle of the thrust bolt assembly. Depending on your caliper type, you may need to turn clockwise or counter-clockwise to retract the piston back into the caliper. Continue turning until the piston is fully retracted, creating space for new brake pads.
6. Удалите инструмент: Once the piston is retracted, carefully unwind the T-handle and remove the tool from the caliper.

Рисунок 3: Step-by-step visual guide for operating the brake caliper service tool.

Helpful Features:

• Магнитные адаптеры: The thrust bolt assemblies feature embedded magnets to securely hold drive keys and adapters in place during use, preventing slippage.

Рисунок 4: The strong magnetic socket adapter feature, ensuring secure attachment of disc adapters.

• Bidirectional T-Handle: The tool includes both left and right thrust bolt assemblies, allowing for piston retraction in either clockwise or counter-clockwise directions, accommodating various caliper designs.

Рисунок 5: The bidirectional T-handle allows for smooth piston operation in both directions.

Совместимость

This disc brake caliper tool set is designed for universal compatibility, fitting most vehicles including hundreds of American, Japanese, and European models. The 18 included disc adapters cover a wide range of piston configurations. Refer to the table below for specific adapter fitment exampле:

Рисунок 6: Detailed compatibility chart for the included disc adapters.

Обслуживание

Proper maintenance ensures the longevity and reliable performance of your tool kit:

• Уборка: After each use, wipe down all components with a clean cloth to remove any brake dust, grease, or debris. For stubborn grime, use a mild degreaser and ensure all parts are thoroughly dried.
• Смазка: Periodically apply a light coat of machine oil to the threaded rods of the thrust bolt assemblies to ensure smooth operation and prevent corrosion.
• Хранилище: Always return all components to their designated slots in the blow-molded case. This protects the tools from damage and keeps them organized for future use. Store the case in a dry, clean environment.
• Инспекция: Before each use, inspect all components for any signs of wear, damage, or corrosion. Do not use damaged tools; replace them as necessary.

Рисунок 7: The tool kit components are built from durable AISI 1045 steel with a protective powder coating for lasting service.

The included brake hangers are useful for suspending calipers during brake service, preventing strain on brake lines and hoses.

Рисунок 8: Brake caliper hangers for convenient and safe suspension of calipers during maintenance.

Поиск неисправностей

If you encounter issues while using the tool kit, consider the following common troubleshooting tips:

• Piston Not Retracting: Ensure you are using the correct adapter for your caliper. Some calipers require a specific rotation direction (clockwise or counter-clockwise); try turning in the opposite direction if the piston does not move. Verify that the caliper bleed screw is not seized and that there is no air in the brake system.
• Проскальзывание адаптера: Confirm the adapter is correctly seated on the piston face and that the magnetic connection is secure. Ensure the retaining plate is properly attached to the thrust bolt.
• Tool Feels Stiff: The threaded rods may require lubrication. Apply a small amount of machine oil to the threads. Ensure no debris is obstructing the movement of the T-handle.
• Повреждение компонентов: If any part of the tool kit appears damaged or worn, discontinue use immediately and replace the affected component. Using damaged tools can lead to injury or further damage to your vehicle.

For persistent issues or complex brake system problems, it is recommended to consult a qualified automotive technician.

Технические характеристики

• Производитель: Orion Motor Tech
• Бренд: Orion Motor Tech
• Вес товара: 6 фунта
• Размеры упаковки: 12.87 x 8.74 x 2.44 дюйма
• Номер модели товара: СУВЕЛАМ
• Номер детали производителя: FBA-CWBRD22BK
• Материал: Blackened #45 Carbon Steel
• Kit Pieces: 24 (including 18 disc adapters, 2 thrust bolt assemblies, 2 retaining plates, 2 brake hangers, and case)
• Первая доступная дата: 17 августа 2020 г.

Гарантия и поддержка

Orion Motor Tech products are designed for quality and durability. For specific warranty information, including coverage details and duration, please refer to the warranty card included with your product or visit the official Orion Motor Tech website. For technical support, replacement parts, or any inquiries regarding your Disc Brake Pad and Caliper Service Tool Kit, please contact Orion Motor Tech customer service directly through their official channels.

Контактная информация: Please refer to the packaging or the official Orion Motor Tech webсайт для получения самых актуальных контактных данных службы поддержки клиентов.