1. Введение
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Pedrollo JSWM2CX self-priming water pump. Please read these instructions carefully before using the product and retain them for future reference.
2. Информация по технике безопасности
Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. This pump operates with electricity and water, which can be hazardous if not handled correctly.
- Ensure the power supply matches the pump's specifications (220V, single-phase).
- Always disconnect power before performing any maintenance or installation work.
- Не эксплуатируйте насос, если шнур питания или вилка повреждены.
- Install the pump in a dry, well-ventilated area, protected from direct weather exposure.
- Обеспечьте надлежащее заземление электрических соединений.
- Do not pump flammable, corrosive, or explosive liquids. This pump is designed for clean water with low sediment content.
- Во время работы насоса необходимо держать детей и посторонних лиц подальше от него.
3. Продукт закончилсяview и особенности
The Pedrollo JSWM2CX is a self-priming surface water pump designed for domestic and professional applications requiring a 220V single-phase electrical supply. It is particularly recommended for drawing clear water from wells or other sources where the suction depth is less than 9 meters. This pump can also be integrated into a water tank system or used with a pressure booster.
Ключевые особенности включают в себя:
- Возможность самовсасывания: Efficiently draws water from depths up to 9 meters.
- Noryl Impeller: Ensures reliable and quiet operation with an excellent flow rate to pressure ratio.
- Прочная конструкция: Features a cast iron pump body, aluminum lantern, and stainless steel pump base.
- Эффективный двигатель: 0.75 kW, 2900 rpm, IE3 class motor for high efficiency and low power consumption.
- Встроенная тепловая защита: For the 220V single-phase motor, protecting the pump from unexpected startups or overheating.
- Высокая скорость потока: Up to 4.2 cubic meters per hour.
- Максимальная голова: Up to 50 HMT (Hydraulic Metre Total).
4. Технические характеристики
| Производитель | Педролло |
| Модель Ссылка | JSWM2CX |
| Цвет | Синий |
| Материал | Cast Iron (Pump Body), Noryl (Impeller, Diffuser/Ejector), Aluminum (Lantern), Stainless Steel (Pump Base, Motor Shaft) |
| Тип мощности | Электрический кабель |
| Томtage | 220 Volts (AC), Single-phase |
| Власть | 0.75 кВт |
| Скорость двигателя | 2900 об/мин |
| Максимальная скорость потока | 4.2 Cubic Meters per Hour |
| Максимальная высота всасывания | 9 метра |
| Max Service Pressure | 6 бара |
| Индекс защиты | IPX4 |
| Класс изоляции | F |
| Непрерывное обслуживание | S1 |
| Motor Class | IE3 (High Efficiency) |
| Материал вала двигателя | Stainless Steel EN 10088-3 - 1.4104 |
5. Установка и настройка
Proper installation is crucial for the pump's performance and longevity. Refer to the diagram below for typical installation exampлес.
- Расположение: Install the pump in a dry, frost-free, and well-ventilated area. Ensure it is protected from direct sunlight and rain.
- Монтаж: Secure the pump to a stable, level surface to minimize vibration.
- Линия всасывания: The pump is self-priming for suction depths up to 9 meters. Ensure the suction line is airtight and has a foot valve with a strainer at the end to prevent debris from entering the pump. The diameter of the suction pipe should be adequate for the required flow rate.
- Delivery Line: Connect the delivery pipe to the pump outlet. It is recommended to install a check valve and a shut-off valve on the delivery side.
- Электрическое подключение: Connect the pump to a dedicated 220V single-phase power supply with appropriate circuit protection. Ensure proper grounding. The integrated thermal protection will safeguard the motor.
- Грунтовка: Перед первым использованием или если насос высох, заполните его водой.asing completely with water through the priming port until it overflows. Close the priming port securely.
6. Операция
The Pedrollo JSWM2CX pump is designed for handling clean liquids with low sediment content. It is suitable for various applications:
- Pressurized Water Distribution: Ideal for supplying water under pressure, often in conjunction with a bladder tank.
- Garden Irrigation: Provides efficient water supply for garden watering systems.
- Washing Applications: Suitable for washing vehicles, terraces, and other surfaces.
- Sanitary System Supply: Can be used to feed domestic sanitary installations.
- Other Specific Applications: Designed for domestic, agricultural, industrial, and horticultural uses.
Запуск насоса: After ensuring the pump is properly primed and all connections are secure, switch on the power supply. The pump should start operating and deliver water. If the pump does not start or fails to deliver water, refer to the troubleshooting section.
Производительность: The pump's performance (flow rate vs. head) can be referenced in the performance curve diagram below.
7. Техническое обслуживание
Регулярное техническое обслуживание обеспечивает оптимальную производительность и продлевает срок службы насоса.
- Регулярный осмотр: Periodically check for leaks, unusual noises, or vibrations.
- Чистота: Keep the pump and its surroundings clean and free from debris. Ensure the motor's cooling fins are not obstructed.
- Обратный клапан/фильтр: Inspect and clean the foot valve strainer on the suction line regularly to prevent blockages.
- Подготовка к зиме: In areas subject to freezing temperatures, drain the pump completely to prevent damage from ice expansion. Disconnect the pump from the power supply and open all drain plugs. Store in a dry, frost-free location.
- Механическая печать: The mechanical seal is a wear part. If persistent leaks occur from the motor side, the seal may need replacement by a qualified technician.
8. Поиск Неисправностей
Прежде чем обращаться в службу технической поддержки,view следующие распространенные проблемы и решения:
| Проблема | Возможная причина | Решение |
|---|---|---|
| Насос не запускается. | No power supply; tripped circuit breaker; motor thermal protection activated; seized impeller. | Check power connection and circuit breaker; allow motor to cool down; inspect impeller for obstructions and manually turn if possible (with power off). |
| Pump runs but delivers no water or low flow. | Pump not primed; air leak in suction line; clogged foot valve/strainer; suction lift too high; impeller damaged. | Re-prime the pump; check all suction line connections for leaks; clean foot valve strainer; ensure suction depth is within limits (max 9m); inspect impeller. |
| Чрезмерный шум или вибрация. | Air in the pump/suction line; cavitation; loose mounting; worn bearings. | Ensure pump is fully primed and suction line is airtight; check for obstructions in suction; tighten mounting bolts; contact service for bearing inspection. |
| Утечка воды из насоса. | Loose connections; damaged mechanical seal; cracked casing. | Tighten all pipe connections; mechanical seal replacement by qualified personnel; inspect casing для повреждения. |
For issues not listed or if solutions do not resolve the problem, please contact a qualified technician or Pedrollo customer support.
9. Гарантия и поддержка
Specific warranty details are typically provided with your purchase documentation. Please refer to the warranty card or contact your retailer for information regarding the warranty period and terms.
For technical assistance, spare parts, or service, please contact your authorized Pedrollo dealer or the manufacturer's customer service department. When contacting support, please have your pump's model number (JSWM2CX) and serial number (if applicable) readily available.
Производитель: Педролло
Модель: JSWM2CX