Введение
This manual provides detailed instructions for the safe and efficient operation, installation, and maintenance of your VEVOR Double-Pipe Bottled Water Dispenser Pump System. Please read this manual thoroughly before use and retain it for future reference.
Характеристики продукта
- Dual-Tube System: Designed for two 5-gallon bottled water containers, extending usage cycles and reducing water change frequency.
- Высокая производительность: Operates at 40-60 PSI (2.8-4.1 bar) with a water outlet flow rate of 0.67 GPM (2.5 L/min) for consistent water supply.
- Широкое применение: Suitable for providing clean water to faucets, refrigerators, ice makers, and coffee machines.
- Dual Switch Protection: Features a buoyancy switch for automatic shut-off when bottles are empty and a water pressure switch for automatic water supply upon faucet opening.
- Тихая работа: Equipped with 4 shock-absorbing pads to minimize noise during use.
Инструкции по технике безопасности
- Убедитесь, что блок питания соответствует напряжению устройства.tagе (110 Вольт).
- Always turn off the dispenser when changing water bottles.
- Do not operate the pump dry for extended periods.
- Держите устройство вдали от источников тепла и прямых солнечных лучей.
- Use only food-grade tubing and connectors for water contact.
- Regularly inspect all connections for leaks.
Содержимое упаковки
- Bottled Water Dispensing System Unit
- 1/4" PE Tube (Length: 19.69 ft / 600 cm)
- Pre-installed Quick Connect (x1)
- Connector Nut (x1)
- Уплотнительное кольцо (1 шт.)
- Silicone Foot Pads (x4)
Настройка и установка
Follow these steps for proper installation of your VEVOR Bottled Water Dispenser Pump System.
1. Распаковка и размещение
- Аккуратно извлеките все компоненты из упаковки.
- Choose a suitable location for the pump unit and water bottles. Ensure there is enough space for two 5-gallon bottles and that the pump unit is mounted securely.
2. Connecting the Tubing
- Insert the long intake tubes into the 5-gallon water bottles. Ensure the tubes reach the bottom of the bottles.
- Connect the other end of the intake tubes to the designated inlet ports on the pump unit.
- Connect the 1/4" PE tube from the pump's outlet port to your appliance (e.g., refrigerator, coffee machine, faucet). Use the provided quick connect and sealing ring for a secure, leak-free connection.
3. Подключение питания
- Вставьте шнур питания в стандартную электрическую розетку на 110 В.
Операция
The VEVOR Bottled Water Dispenser Pump System is designed for automatic operation.
- Включение питания: Flip the power switch on the pump unit to the "ON" position. The pump will pressurize the system.
- Раздача воды: When your connected appliance (e.g., refrigerator dispenser, coffee machine) demands water, the pump will automatically activate to supply water.
- Автоматическое отключение: The built-in buoyancy switch will detect when a water bottle is empty and automatically stop the pump to prevent dry running.
- Pressure Maintenance: The water pressure switch maintains consistent pressure in the line, ensuring a steady flow when needed.
Обслуживание
Регулярное техническое обслуживание обеспечивает оптимальную производительность и долговечность вашего диспенсера.
- Changing Water Bottles: Always turn off the pump unit before replacing empty water bottles. This prevents air from entering the system and ensures proper priming.
- Уборка: Periodically clean the exterior of the pump unit with a damp Ткань. Не используйте абразивные чистящие средства.
- Проверка труб: Inspect the PE tubing for any kinks, cracks, or signs of wear. Replace if necessary.
- Очистка системы: If the system has been idle for an extended period, flush a small amount of water through it before use.
Поиск неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Насос не работает | No power; Power switch off; Empty water bottle; Loose connection. | Check power cord and outlet; Turn on power switch; Replace water bottle; Secure all electrical and tubing connections. |
| Низкий расход воды | Kinked tubing; Partially empty bottle; Air in the system; Clogged filter on intake tube. | Straighten tubing; Replace water bottle; Turn off and on to re-prime; Clean or replace intake filter. |
| Насос работает постоянно | Leak in the system; Air leak in intake tube; Faulty pressure switch. | Check all connections for leaks; Ensure intake tubes are fully submerged and sealed; Contact customer support if switch is faulty. |
| Необычный шум | Vibration; Air in the system; Obstruction in pump. | Ensure pump is securely mounted; Check for air in lines; Inspect pump for foreign objects (unplug first). |
Технические характеристики
| Особенность | Деталь |
|---|---|
| Бренд | ВЕВОР |
| Номер модели | Bottled Water Dispensing Pump System |
| Стиль | Double Inlet |
| Номинальная мощность | 50 Вт |
| Диапазон рабочего давления | 40-60 фунтов на квадратный дюйм (2.8-4.1 бар) |
| Water Outlet Flow Rate | > 0.67 GPM / > 2.5 L/min |
| Pump Head Flow Rate | > 1 GPM / > 3.8 L/min |
| Томtage | 110 Вольт |
| Размеры продукта | 5.5"Г x 2.8"Ш x 7.9"В (14 см Г x 7.1 см Ш x 20.1 см В) |
| Вес товара | 5.98 фунта (2.71 кг) |
| Материал | Пластик |
| Тип установки | Автономный |
| Источник питания | Проводной электрический |
Гарантия и поддержка
VEVOR products are designed for durability and performance. For technical support, warranty information, or any inquiries, please visit the official VEVOR support webсайт: www.vevor.com/support.
Сохраните чек о покупке для предъявления гарантийных претензий.