ExcelTek 971LM Compatible Garage Door Remote Control

Важная информация о совместимости

This remote control is designed to work exclusively with Liftmaster, Chamberlain, Craftsman, Sears, Raynor, and AccessMaster garage door openers that feature a Красный or Orange Learn Button. It is not compatible with other learn button colors or brands.

Image: Compatibility diagram highlighting the required Red or Orange Learn Button on the garage door opener.

Совместимые модели пультов дистанционного управления:

• Liftmaster: 91LM, 92LM, 94LM, 96LM, 970LM, 971LM, 972LM, 973LM, 974LM
• Chamberlain: 950CB, 953CB, 956CB
• Sears Craftsman: 139.53680, 139.53681, 139.53661, 139.53662, 139.53663, 139.53664

Продукт болееview

The ExcelTek 971LM compatible garage door remote control offers a convenient and secure way to operate your garage door. Its compact design and robust features ensure reliable performance.

Image: The ExcelTek remote control, showing its compact size and attached keychain clip.

Основные характеристики:

• Security+ Rolling Code Technology: Enhances security by changing the code each time the remote is used.
• Простота программирования: Simple wireless connection process.
• Sliding Protective Cover: Предотвращает случайное нажатие кнопок.
• Поддержка нескольких частот: Supports up to 3 encrypted frequencies (buttons C and D are linked).
• Компактный и легкий: Designed for portability and convenience.
• Прочная конструкция: Rugged plastic and metal case for long-lasting use.
• Built-in LED Indicator: Illuminates when a signal is transmitted.
• Metal Reinforced Keychain Hole: Designed to withstand pressure.

Image: Detailed diagram illustrating the various features of the ExcelTek remote control.

Содержимое упаковки:

• ExcelTek 971LM Compatible Remote Control
• Keychain Clip
• 1 x 27A 12V Battery (pre-installed)
• Инструкции по программированию

Image: The remote control, its packaging, programming instructions, and keychain clip.

Инструкции по настройке и программированию

Follow these steps to program your ExcelTek remote control to your garage door opener. Ensure your garage door opener has a Red or Orange Learn Button before proceeding.

1. Locate the Smart/Learn Button: Find the Smart/Learn button on your garage door opener unit. This button is typically located on the motor head unit, often under the light cover or on the back panel.
2. Активировать режим обучения: Press and immediately release the Smart/Learn button on your garage door opener. The Learn LED indicator on the opener will glow steadily for 30 seconds, indicating it is in programming mode.
3. Программирование пульта дистанционного управления: While the Learn LED is glowing (within 30 seconds), press and hold the desired button on your ExcelTek remote control. Release the button on the remote when the garage door opener lights blink or two clicks are heard. This confirms successful programming.

   Note: If programming to other products or if the first attempt is unsuccessful, you may need to press the remote button a second time to activate the product.

Image: Visual guide for programming the remote control, detailing the steps to sync with your garage door opener.

Инструкция по эксплуатации

Using your ExcelTek remote control is straightforward:

• Open/Close Garage Door: Slide the protective cover down to expose the buttons. Press the programmed button (A, B, C, or D) once to open or close your garage door.
• Предотвращение случайного включения: Always slide the protective cover back up when not in use to prevent unintended button presses, especially when carrying the remote in a pocket or bag.
• Диапазон: The remote has a maximum operating range of approximately 100 meters (328 feet). Optimal performance may vary based on environmental factors and obstructions.

Image: A person using the ExcelTek remote control to operate a garage door.

Обслуживание

Замена батареи:

The remote control uses one 27A 12V battery. When the remote's range decreases significantly or the LED indicator does not light up, it may be time to replace the battery.

1. Осторожно откройте пульт дистанционного управления.asing.
2. Remove the old 27A 12V battery.
3. Insert a new 27A 12V battery, ensuring correct polarity (+/-).
4. Закройте пульт дистанционного управленияasinг надежно.

Уборка:

To clean the remote control, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the casinг или внутренние компоненты.

Поиск неисправностей

• Remote Not Working / Intermittent Operation:
  • Check the battery: Ensure the battery is correctly installed and has sufficient charge. Replace if necessary.
  • Reprogram the remote: Follow the "Setup and Programming Instructions" to re-sync the remote with your garage door opener.
  • Check compatibility: Verify that your garage door opener has a Red or Orange Learn Button.
  • Obstructions: Ensure there are no obstructions blocking the signal between the remote and the garage door opener.
• Garage Door Opens/Closes Accidentally:
  • Ensure the sliding protective cover is closed when the remote is not in active use to prevent accidental button presses.
• Уменьшенный диапазон рабочих режимов:
  • Замените аккумулятор.
  • Ensure there are no new sources of interference (e.g., new electronic devices) near your garage door opener.

Технические характеристики

Гарантия и поддержка

For warranty information or technical support, please refer to the documentation included with your purchase or contact ExcelTek customer service directly. Contact details can typically be found on the product packaging or the manufacturer's official webсайт.